user/sven/linux.git/drivers/tty/vt, branch v6.0-rc2

Merge tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2022-08-08T18:31:40Z

Pull tty / serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.0-rc1. It was delayed from last week as I wanted to make sure the last commit here got some good testing in linux-next and elsewhere as it seemed to show up only late in testing for some reason. Nothing major here, just lots of cleanups from Jiri and Ilpo to make the tty core cleaner (Jiri) and the rs485 code simpler to use (Ilpo). Also included in here is the obligatory n_gsm updates from Daniel Starke and lots of tiny driver updates and minor fixes and tweaks for other smaller serial drivers. All of these have been in linux-next for a while with no reported problems" * tag 'tty-6.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits) tty: serial: qcom-geni-serial: Fix %lu -> %u in print statements tty: amiserial: Fix comment typo tty: serial: document uart_get_console() tty: serial: serial_core, reformat kernel-doc for functions Documentation: serial: link uart_ops properly Documentation: serial: move GPIO kernel-doc to the functions Documentation: serial: dedup kernel-doc for uart functions Documentation: serial: move uart_ops documentation to the struct dt-bindings: serial: snps-dw-apb-uart: Document Rockchip RV1126 serial: mvebu-uart: uart2 error bits clearing tty: serial: fsl_lpuart: correct the count of break characters serial: stm32: make info structs static to avoid sparse warnings serial: fsl_lpuart: zero out parity bit in CS7 mode tty: serial: qcom-geni-serial: Fix get_clk_div_rate() which otherwise could return a sub-optimal clock rate. serial: 8250_bcm2835aux: Add missing clk_disable_unprepare() tty: vt: initialize unicode screen buffer serial: remove VR41XX serial driver serial: 8250: lpc18xx: Remove redundant sanity check for RS485 flags serial: 8250_dwlib: remove redundant sanity check for RS485 flags dt_bindings: rs485: Correct delay values ...

tty: vt: initialize unicode screen buffer

2022-07-19T12:18:27Z

syzbot reports kernel infoleak at vcs_read() [1], for buffer can be read immediately after resize operation. Initialize buffer using kzalloc(). ---------- #include #include #include #include int main(int argc, char *argv[]) { struct fb_var_screeninfo var = { }; const int fb_fd = open("/dev/fb0", 3); ioctl(fb_fd, FBIOGET_VSCREENINFO, &var); var.yres = 0x21; ioctl(fb_fd, FBIOPUT_VSCREENINFO, &var); return read(open("/dev/vcsu", O_RDONLY), &var, sizeof(var)) == -1; } ---------- Link: https://syzkaller.appspot.com/bug?extid=31a641689d43387f05d3 [1] Cc: stable Reported-by: syzbot Reviewed-by: Jiri Slaby Signed-off-by: Tetsuo Handa Link: https://lore.kernel.org/r/4ef053cf-e796-fb5e-58b7-3ae58242a4ad@I-love.SAKURA.ne.jp Signed-off-by: Greg Kroah-Hartman

vt: fix memory overlapping when deleting chars in the buffer

2022-06-30T15:17:40Z

A memory overlapping copy occurs when deleting a long line. This memory overlapping copy can cause data corruption when scr_memcpyw is optimized to memcpy because memcpy does not ensure its behavior if the destination buffer overlaps with the source buffer. The line buffer is not always broken, because the memcpy utilizes the hardware acceleration, whose result is not deterministic. Fix this problem by using replacing the scr_memcpyw with scr_memmovew. Fixes: 81732c3b2fed ("tty vt: Fix line garbage in virtual console on command line edition") Cc: stable Signed-off-by: Yangxi Xiang Link: https://lore.kernel.org/r/20220628093322.5688-1-xyangxi5@gmail.com Signed-off-by: Greg Kroah-Hartman

tty/vt: consolemap: use E_TABSZ for the translations size

2022-06-27T12:17:12Z

The code expects "translations" to have 256 (E_TABSZ) values. Use the macro instead of the constant to be explicit about this. Suggested-by: Ilpo Järvinen Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20220614090537.15557-8-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

tty/vt: consolemap: remove dflt reset from con_do_clear_unimap()

2022-06-27T12:17:12Z

con_do_clear_unimap() sets dflt to NULL and then calls con_release_unimap() which does the very same as the first thing. So remove the former as it is apparently superfluous. Suggested-by: Ilpo Järvinen Reviewed-by: Ilpo Järvinen Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20220614090537.15557-7-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

tty/vt: consolemap: improve UNI_*() macros definitions

2022-06-27T12:17:12Z

Use FIELD_GET() and GENMASK() helpers instead of direct shifts and ANDs. This makes the code even more obvious. I didn't know about the helpers at the time of writing the macros. Suggested-by: Ilpo Järvinen Reviewed-by: Ilpo Järvinen Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20220614090537.15557-6-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

tty/vt: consolemap: rename struct vc_data::vc_uni_pagedir*

2022-06-27T12:17:12Z

As a follow-up to the commit 4173f018aae1 (tty/vt: consolemap: rename and document struct uni_pagedir), rename also the members of struct vc_data. I.e. pagedir -> pagedict. And while touching all the places, remove also the unnecessary vc_ prefix. Suggested-by: Ilpo Järvinen Reviewed-by: Ilpo Järvinen Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20220614090537.15557-5-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

tty/vt: consolemap: saner variable names in set_inverse_transl()

2022-06-27T12:17:12Z

The function uses too vague variable names like i, j, k for iterators, p, q, p1, p2 for pointers etc. Rename all these, so that it is clear what is going on: - dict: for dictionaries. - d, r, g: for dir, row, glyph iterators -- these are unsigned now. - dir, row: for directory and row pointers. - glyph: for the glyph. - and so on... This is a lot of shuffling, but the result pays off, IMO. Reviewed-by: Ilpo Järvinen Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20220614090537.15557-4-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

tty/vt: consolemap: saner variable names in set_inverse_trans_unicode()

2022-06-27T12:17:12Z

The function still uses too vague parameter name after commit 50c92a1b2d50 (tty/vt: consolemap: saner variable names in set_inverse_trans_unicode()). So use "dict" instead of "p" for that parameter too. Reviewed-by: Ilpo Järvinen Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20220614090537.15557-3-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman

tty/vt: consolemap: remove unused parameter from set_inverse_trans_unicode()

2022-06-27T12:17:11Z

conp is unused in set_inverse_trans_unicode(), remove it. Reviewed-by: Ilpo Järvinen Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20220614090537.15557-2-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman