user/sven/linux.git/drivers/tty, branch v4.4.271

serial: rp2: use 'request_firmware' instead of 'request_firmware_nowait'

2021-06-03T06:22:06Z

commit 016002848c82eeb5d460489ce392d91fe18c475c upstream. In 'rp2_probe', the driver registers 'rp2_uart_interrupt' then calls 'rp2_fw_cb' through 'request_firmware_nowait'. In 'rp2_fw_cb', if the firmware don't exists, function just return without initializing ports of 'rp2_card'. But now the interrupt handler function has been registered, and when an interrupt comes, 'rp2_uart_interrupt' may access those ports then causing NULL pointer dereference or other bugs. Because the driver does some initialization work in 'rp2_fw_cb', in order to make the driver ready to handle interrupts, 'request_firmware' should be used instead of asynchronous 'request_firmware_nowait'. This report reveals it: INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59- gc9ba5276e321-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xec/0x156 lib/dump_stack.c:118 assign_lock_key kernel/locking/lockdep.c:727 [inline] register_lock_class+0x14e5/0x1ba0 kernel/locking/lockdep.c:753 __lock_acquire+0x187/0x3750 kernel/locking/lockdep.c:3303 lock_acquire+0x124/0x340 kernel/locking/lockdep.c:3907 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x32/0x50 kernel/locking/spinlock.c:144 spin_lock include/linux/spinlock.h:329 [inline] rp2_ch_interrupt drivers/tty/serial/rp2.c:466 [inline] rp2_asic_interrupt.isra.9+0x15d/0x990 drivers/tty/serial/rp2.c:493 rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504 __handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149 handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189 handle_irq_event+0xac/0x140 kernel/irq/handle.c:206 handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725 generic_handle_irq_desc include/linux/irqdesc.h:155 [inline] handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87 do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670 RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61 Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7 f8 8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200 RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840 R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002 R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000 arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline] default_idle+0x6f/0x360 arch/x86/kernel/process.c:557 arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548 default_idle_call+0x3b/0x60 kernel/sched/idle.c:93 cpuidle_idle_call kernel/sched/idle.c:153 [inline] do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263 cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369 start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243 BUG: unable to handle kernel NULL pointer dereference at 0000000000000010 PGD 8000000056d27067 P4D 8000000056d27067 PUD 56d28067 PMD 0 Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.19.177-gdba4159c14ef-dirty #45 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59- gc9ba5276e321-prebuilt.qemu.org 04/01/2014 RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline] RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline] RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c: 493 Code: df e8 43 5d c2 05 48 8d 83 e8 01 00 00 48 89 85 60 ff ff ff 48 c1 e8 03 42 80 3c 30 00 0f 85 aa 07 00 00 48 8b 83 e8 01 00 00 <8b> 40 10 89 c1 89 85 68 ff ff ff 48 8b 83 e8 01 00 00 89 48 10 83 RSP: 0018:ffff88806c287cd0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff88806ade6820 RCX: ffffffff814300b1 RDX: 1ffff1100d5bcd06 RSI: 0000000000000004 RDI: ffff88806ade6820 RBP: ffff88806c287db8 R08: ffffed100d5bcd05 R09: ffffed100d5bcd05 R10: 0000000000000001 R11: ffffed100d5bcd04 R12: ffffc90001e00000 R13: ffff888069654e10 R14: dffffc0000000000 R15: ffff888069654df0 FS: 0000000000000000(0000) GS:ffff88806c280000(0000) knlGS: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000006892c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: rp2_uart_interrupt+0x49/0xe0 drivers/tty/serial/rp2.c:504 __handle_irq_event_percpu+0xfb/0x770 kernel/irq/handle.c:149 handle_irq_event_percpu+0x79/0x150 kernel/irq/handle.c:189 handle_irq_event+0xac/0x140 kernel/irq/handle.c:206 handle_fasteoi_irq+0x232/0x5c0 kernel/irq/chip.c:725 generic_handle_irq_desc include/linux/irqdesc.h:155 [inline] handle_irq+0x230/0x3a0 arch/x86/kernel/irq_64.c:87 do_IRQ+0xa7/0x1e0 arch/x86/kernel/irq.c:247 common_interrupt+0xf/0xf arch/x86/entry/entry_64.S:670 RIP: 0010:native_safe_halt+0x28/0x30 arch/x86/include/asm/irqflags.h:61 Code: 00 00 55 be 04 00 00 00 48 c7 c7 00 c2 2f 8c 48 89 e5 e8 fb 31 e7 f8 8b 05 75 af 8d 03 85 c0 7e 07 0f 00 2d 8a 61 65 00 fb f4 <5d> c3 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 41 RSP: 0018:ffff88806b71fcc8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffde RAX: 0000000000000000 RBX: ffffffff8bde7e48 RCX: ffffffff88a21285 RDX: 0000000000000000 RSI: 0000000000000004 RDI: ffffffff8c2fc200 RBP: ffff88806b71fcc8 R08: fffffbfff185f840 R09: fffffbfff185f840 R10: 0000000000000001 R11: fffffbfff185f840 R12: 0000000000000002 R13: ffffffff8bea18a0 R14: 0000000000000000 R15: 0000000000000000 arch_safe_halt arch/x86/include/asm/paravirt.h:94 [inline] default_idle+0x6f/0x360 arch/x86/kernel/process.c:557 arch_cpu_idle+0xf/0x20 arch/x86/kernel/process.c:548 default_idle_call+0x3b/0x60 kernel/sched/idle.c:93 cpuidle_idle_call kernel/sched/idle.c:153 [inline] do_idle+0x2ab/0x3c0 kernel/sched/idle.c:263 cpu_startup_entry+0xcb/0xe0 kernel/sched/idle.c:369 start_secondary+0x3b8/0x4e0 arch/x86/kernel/smpboot.c:271 secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243 Modules linked in: Dumping ftrace buffer: (ftrace buffer empty) CR2: 0000000000000010 ---[ end trace 11804dbb55cb1a64 ]--- RIP: 0010:readl arch/x86/include/asm/io.h:59 [inline] RIP: 0010:rp2_ch_interrupt drivers/tty/serial/rp2.c:472 [inline] RIP: 0010:rp2_asic_interrupt.isra.9+0x181/0x990 drivers/tty/serial/rp2.c: 493 Code: df e8 43 5d c2 05 48 8d 83 e8 01 00 00 48 89 85 60 ff ff ff 48 c1 e8 03 42 80 3c 30 00 0f 85 aa 07 00 00 48 8b 83 e8 01 00 00 <8b> 40 10 89 c1 89 85 68 ff ff ff 48 8b 83 e8 01 00 00 89 48 10 83 RSP: 0018:ffff88806c287cd0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: ffff88806ade6820 RCX: ffffffff814300b1 RDX: 1ffff1100d5bcd06 RSI: 0000000000000004 RDI: ffff88806ade6820 RBP: ffff88806c287db8 R08: ffffed100d5bcd05 R09: ffffed100d5bcd05 R10: 0000000000000001 R11: ffffed100d5bcd04 R12: ffffc90001e00000 R13: ffff888069654e10 R14: dffffc0000000000 R15: ffff888069654df0 FS: 0000000000000000(0000) GS:ffff88806c280000(0000) knlGS: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000010 CR3: 000000006892c000 CR4: 00000000000006e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Reported-by: Zheyu Ma Signed-off-by: Zheyu Ma Link: https://lore.kernel.org/r/1621577323-1541-1-git-send-email-zheyuma97@gmail.com Cc: stable Signed-off-by: Greg Kroah-Hartman

tty: vt: always invoke vc->vc_sw->con_resize callback

2021-05-26T09:27:34Z

commit ffb324e6f874121f7dce5bdae5e05d02baae7269 upstream. syzbot is reporting OOB write at vga16fb_imageblit() [1], for resize_screen() from ioctl(VT_RESIZE) returns 0 without checking whether requested rows/columns fit the amount of memory reserved for the graphical screen if current mode is KD_GRAPHICS. ---------- #include #include #include #include #include #include int main(int argc, char *argv[]) { const int fd = open("/dev/char/4:1", O_RDWR); struct vt_sizes vt = { 0x4100, 2 }; ioctl(fd, KDSETMODE, KD_GRAPHICS); ioctl(fd, VT_RESIZE, &vt); ioctl(fd, KDSETMODE, KD_TEXT); return 0; } ---------- Allow framebuffer drivers to return -EINVAL, by moving vc->vc_mode != KD_GRAPHICS check from resize_screen() to fbcon_resize(). Link: https://syzkaller.appspot.com/bug?extid=1f29e126cf461c4de3b3 [1] Reported-by: syzbot Suggested-by: Linus Torvalds Signed-off-by: Tetsuo Handa Tested-by: syzbot Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

vt: Fix character height handling with VT_RESIZEX

2021-05-26T09:27:34Z

commit 860dafa902595fb5f1d23bbcce1215188c3341e6 upstream. Restore the original intent of the VT_RESIZEX ioctl's `v_clin' parameter which is the number of pixel rows per character (cell) rather than the height of the font used. For framebuffer devices the two values are always the same, because the former is inferred from the latter one. For VGA used as a true text mode device these two parameters are independent from each other: the number of pixel rows per character is set in the CRT controller, while font height is in fact hardwired to 32 pixel rows and fonts of heights below that value are handled by padding their data with blanks when loaded to hardware for use by the character generator. One can change the setting in the CRT controller and it will update the screen contents accordingly regardless of the font loaded. The `v_clin' parameter is used by the `vgacon' driver to set the height of the character cell and then the cursor position within. Make the parameter explicit then, by defining a new `vc_cell_height' struct member of `vc_data', set it instead of `vc_font.height' from `v_clin' in the VT_RESIZEX ioctl, and then use it throughout the `vgacon' driver except where actual font data is accessed which as noted above is independent from the CRTC setting. This way the framebuffer console driver is free to ignore the `v_clin' parameter as irrelevant, as it always should have, avoiding any issues attempts to give the parameter a meaning there could have caused, such as one that has led to commit 988d0763361b ("vt_ioctl: make VT_RESIZEX behave like VT_RESIZE"): "syzbot is reporting UAF/OOB read at bit_putcs()/soft_cursor() [1][2], for vt_resizex() from ioctl(VT_RESIZEX) allows setting font height larger than actual font height calculated by con_font_set() from ioctl(PIO_FONT). Since fbcon_set_font() from con_font_set() allocates minimal amount of memory based on actual font height calculated by con_font_set(), use of vt_resizex() can cause UAF/OOB read for font data." The problem first appeared around Linux 2.5.66 which predates our repo history, but the origin could be identified with the old MIPS/Linux repo also at: as commit 9736a3546de7 ("Merge with Linux 2.5.66."), where VT_RESIZEX code in `vt_ioctl' was updated as follows: if (clin) - video_font_height = clin; + vc->vc_font.height = clin; making the parameter apply to framebuffer devices as well, perhaps due to the use of "font" in the name of the original `video_font_height' variable. Use "cell" in the new struct member then to avoid ambiguity. References: [1] https://syzkaller.appspot.com/bug?id=32577e96d88447ded2d3b76d71254fb855245837 [2] https://syzkaller.appspot.com/bug?id=6b8355d27b2b94fb5cedf4655e3a59162d9e48e3 Signed-off-by: Maciej W. Rozycki Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org # v2.6.12+ Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

tty: fix return value for unsupported ioctls

2021-05-22T08:38:23Z

[ Upstream commit 1b8b20868a6d64cfe8174a21b25b74367bdf0560 ] Drivers should return -ENOTTY ("Inappropriate I/O control operation") when an ioctl isn't supported, while -EINVAL is used for invalid arguments. Fix up the TIOCMGET, TIOCMSET and TIOCGICOUNT helpers which returned -EINVAL when a tty driver did not implement the corresponding operations. Note that the TIOCMGET and TIOCMSET helpers predate git and do not get a corresponding Fixes tag below. Fixes: d281da7ff6f7 ("tty: Make tiocgicount a handler") Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20210407095208.31838-3-johan@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

vt/consolemap: do font sum unsigned

2021-03-07T10:24:21Z

[ Upstream commit 9777f8e60e718f7b022a94f2524f967d8def1931 ] The constant 20 makes the font sum computation signed which can lead to sign extensions and signed wraps. It's not much of a problem as we build with -fno-strict-overflow. But if we ever decide not to, be ready, so switch the constant to unsigned. Signed-off-by: Jiri Slaby Link: https://lore.kernel.org/r/20210105120239.28031-7-jslaby@suse.cz Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

serial: 8250_omap: Avoid FIFO corruption caused by MDR1 access

2020-12-29T12:42:33Z

commit d96f04d347e4011977abdbb4da5d8f303ebd26f8 upstream. It has been observed that once per 300-1300 port openings the first transmitted byte is being corrupted on AM3352 ("v" written to FIFO appeared as "e" on the wire). It only happened if single byte has been transmitted right after port open, which means, DMA is not used for this transfer and the corruption never happened afterwards. Therefore I've carefully re-read the MDR1 errata (link below), which says "when accessing the MDR1 registers that causes a dummy under-run condition that will freeze the UART in IrDA transmission. In UART mode, this may corrupt the transferred data". Strictly speaking, omap_8250_mdr1_errataset() performs a read access and if the value is the same as should be written, exits without errata-recommended FIFO reset. A brief check of the serial_omap_mdr1_errataset() from the competing omap-serial driver showed it has no read access of MDR1. After removing the read access from omap_8250_mdr1_errataset() the data corruption never happened any more. Link: https://www.ti.com/lit/er/sprz360i/sprz360i.pdf Fixes: 61929cf0169d ("tty: serial: Add 8250-core based omap driver") Cc: stable@vger.kernel.org Signed-off-by: Alexander Sverdlin Link: https://lore.kernel.org/r/20201210055257.1053028-1-alexander.sverdlin@gmail.com Signed-off-by: Greg Kroah-Hartman

tty: Fix ->session locking

2020-12-11T12:36:45Z

commit c8bcd9c5be24fb9e6132e97da5a35e55a83e36b9 upstream. Currently, locking of ->session is very inconsistent; most places protect it using the legacy tty mutex, but disassociate_ctty(), __do_SAK(), tiocspgrp() and tiocgsid() don't. Two of the writers hold the ctrl_lock (because they already need it for ->pgrp), but __proc_set_tty() doesn't do that yet. On a PREEMPT=y system, an unprivileged user can theoretically abuse this broken locking to read 4 bytes of freed memory via TIOCGSID if tiocgsid() is preempted long enough at the right point. (Other things might also go wrong, especially if root-only ioctls are involved; I'm not sure about that.) Change the locking on ->session such that: - tty_lock() is held by all writers: By making disassociate_ctty() hold it. This should be fine because the same lock can already be taken through the call to tty_vhangup_session(). The tricky part is that we need to shorten the area covered by siglock to be able to take tty_lock() without ugly retry logic; as far as I can tell, this should be fine, since nothing in the signal_struct is touched in the `if (tty)` branch. - ctrl_lock is held by all writers: By changing __proc_set_tty() to hold the lock a little longer. - All readers that aren't holding tty_lock() hold ctrl_lock: By adding locking to tiocgsid() and __do_SAK(), and expanding the area covered by ctrl_lock in tiocspgrp(). Cc: stable@kernel.org Signed-off-by: Jann Horn Reviewed-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman

tty: Fix ->pgrp locking in tiocspgrp()

2020-12-11T12:36:44Z

commit 54ffccbf053b5b6ca4f6e45094b942fab92a25fc upstream. tiocspgrp() takes two tty_struct pointers: One to the tty that userspace passed to ioctl() (`tty`) and one to the TTY being changed (`real_tty`). These pointers are different when ioctl() is called with a master fd. To properly lock real_tty->pgrp, we must take real_tty->ctrl_lock. This bug makes it possible for racing ioctl(TIOCSPGRP, ...) calls on both sides of a PTY pair to corrupt the refcount of `struct pid`, leading to use-after-free errors. Fixes: 47f86834bbd4 ("redo locking of tty->pgrp") CC: stable@kernel.org Signed-off-by: Jann Horn Reviewed-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman

tty: serial: imx: keep console clocks always on

2020-11-24T11:48:12Z

commit e67c139c488e84e7eae6c333231e791f0e89b3fb upstream. For below code, there has chance to cause deadlock in SMP system: Thread 1: clk_enable_lock(); pr_info("debug message"); clk_enable_unlock(); Thread 2: imx_uart_console_write() clk_enable() clk_enable_lock(); Thread 1: Acuired clk enable_lock -> printk -> console_trylock_spinning Thread 2: console_unlock() -> imx_uart_console_write -> clk_disable -> Acquite clk enable_lock So the patch is to keep console port clocks always on like other console drivers. Fixes: 1cf93e0d5488 ("serial: imx: remove the uart_console() check") Acked-by: Uwe Kleine-König Signed-off-by: Fugang Duan Link: https://lore.kernel.org/r/20201111025136.29818-1-fugang.duan@nxp.com Cc: stable [fix up build warning - gregkh] Signed-off-by: Greg Kroah-Hartman

serial: txx9: add missing platform_driver_unregister() on error in serial_txx9_init

2020-11-10T09:22:20Z

commit 0c5fc92622ed5531ff324b20f014e9e3092f0187 upstream. Add the missing platform_driver_unregister() before return from serial_txx9_init in the error handling case when failed to register serial_txx9_pci_driver with macro ENABLE_SERIAL_TXX9_PCI defined. Fixes: ab4382d27412 ("tty: move drivers/serial/ to drivers/tty/serial/") Signed-off-by: Qinglang Miao Link: https://lore.kernel.org/r/20201103084942.109076-1-miaoqinglang@huawei.com Cc: stable Signed-off-by: Greg Kroah-Hartman