user/sven/linux.git/drivers/tty, branch v6.12.47

vt: defkeymap: Map keycodes above 127 to K_HOLE

2025-08-28T14:30:54Z

commit b43cb4ff85da5cf29c4cd351ef1d7dd8210780f7 upstream. The maximum number of keycodes got bumped to 256 a very long time ago, but the default keymaps were never adjusted to match. This is causing the kernel to interpret keycodes above 127 as U+0000 if the shipped generated keymap is used. Fix this by mapping all keycodes above 127 to K_HOLE so the kernel ignores them. The contents of this patche were generated by rerunning `loadkeys --mktable --unicode` and only including the changes to map keycodes above 127 to K_HOLE. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Myrrh Periwinkle Cc: stable Reviewed-by: Jiri Slaby Link: https://lore.kernel.org/r/20250702-vt-misc-unicode-fixes-v1-2-c27e143cc2eb@qtmlabs.xyz Signed-off-by: Greg Kroah-Hartman

vt: keyboard: Don't process Unicode characters in K_OFF mode

2025-08-28T14:30:54Z

commit b1cc2092ea7a52e2c435aee6d2b1bcb773202663 upstream. We don't process Unicode characters if the virtual terminal is in raw mode, so there's no reason why we shouldn't do the same for K_OFF (especially since people would expect K_OFF to actually turn off all VT key processing). Fixes: 9fc3de9c8356 ("vt: Add virtual console keyboard mode OFF") Signed-off-by: Myrrh Periwinkle Cc: stable Reviewed-by: Jiri Slaby Link: https://lore.kernel.org/r/20250702-vt-misc-unicode-fixes-v1-1-c27e143cc2eb@qtmlabs.xyz Signed-off-by: Greg Kroah-Hartman

serial: 8250: fix panic due to PSLVERR

2025-08-28T14:30:53Z

commit 7f8fdd4dbffc05982b96caf586f77a014b2a9353 upstream. When the PSLVERR_RESP_EN parameter is set to 1, the device generates an error response if an attempt is made to read an empty RBR (Receive Buffer Register) while the FIFO is enabled. In serial8250_do_startup(), calling serial_port_out(port, UART_LCR, UART_LCR_WLEN8) triggers dw8250_check_lcr(), which invokes dw8250_force_idle() and serial8250_clear_and_reinit_fifos(). The latter function enables the FIFO via serial_out(p, UART_FCR, p->fcr). Execution proceeds to the serial_port_in(port, UART_RX). This satisfies the PSLVERR trigger condition. When another CPU (e.g., using printk()) is accessing the UART (UART is busy), the current CPU fails the check (value & ~UART_LCR_SPAR) == (lcr & ~UART_LCR_SPAR) in dw8250_check_lcr(), causing it to enter dw8250_force_idle(). Put serial_port_out(port, UART_LCR, UART_LCR_WLEN8) under the port->lock to fix this issue. Panic backtrace: [ 0.442336] Oops - unknown exception [#1] [ 0.442343] epc : dw8250_serial_in32+0x1e/0x4a [ 0.442351] ra : serial8250_do_startup+0x2c8/0x88e ... [ 0.442416] console_on_rootfs+0x26/0x70 Fixes: c49436b657d0 ("serial: 8250_dw: Improve unwritable LCR workaround") Link: https://lore.kernel.org/all/84cydt5peu.fsf@jogness.linutronix.de/T/ Signed-off-by: Yunhui Cui Reviewed-by: John Ogness Cc: stable Link: https://lore.kernel.org/r/20250723023322.464-2-cuiyunhui@bytedance.com [ adapted to inline code structure without separate serial8250_initialize helper function ] Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

tty: serial: fix print format specifiers

2025-08-20T16:30:26Z

[ Upstream commit 33a2515abd45c64911955ff1da179589db54f99f ] The serial info sometimes produces negative TX/RX counts. E.g.: 3: uart:FSL_LPUART mmio:0x02970000 irq:46 tx:-1595870545 rx:339619 RTS|CTS|DTR|DSR|CD It appears that the print format specifiers don't match with the types of the respective variables. E.g.: All of the fields in struct uart_icount are u32, but the format specifier used is %d, even though u32 is unsigned and %d is for signed integers. Update drivers/tty/serial/serial_core.c to use the proper format specifiers. Reference https://docs.kernel.org/core-api/printk-formats.html as the documentation for what format specifiers are the proper ones to use for a given C type. Signed-off-by: Joseph Tilahun Link: https://lore.kernel.org/r/20250610065653.3750067-1-jtilahun@astranis.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

pch_uart: Fix dma_sync_sg_for_device() nents value

2025-07-24T06:56:21Z

commit 6c0e9f05c9d7875995b0e92ace71be947f280bbd upstream. The dma_sync_sg_for_device() functions should be called with the same nents as the dma_map_sg(), not the value the map function returned according to the documentation in Documentation/core-api/dma-api.rst:450: With the sync_sg API, all the parameters must be the same as those passed into the sg mapping API. Fixes: da3564ee027e ("pch_uart: add multi-scatter processing") Cc: stable Signed-off-by: Thomas Fourier Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20250701113452.18590-2-fourier.thomas@gmail.com Signed-off-by: Greg Kroah-Hartman

vt: add missing notification when switching back to text mode

2025-07-17T16:37:22Z

[ Upstream commit ff78538e07fa284ce08cbbcb0730daa91ed16722 ] Programs using poll() on /dev/vcsa to be notified when VT changes occur were missing one case: the switch from gfx to text mode. Signed-off-by: Nicolas Pitre Link: https://lore.kernel.org/r/9o5ro928-0pp4-05rq-70p4-ro385n21n723@onlyvoer.pbz Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

serial: imx: Restore original RXTL for console to fix data loss

2025-07-06T09:01:43Z

commit f23c52aafb1675ab1d1f46914556d8e29cbbf7b3 upstream. Commit 7a637784d517 ("serial: imx: reduce RX interrupt frequency") introduced a regression on the i.MX6UL EVK board. The issue can be reproduced with the following steps: - Open vi on the board. - Paste a text file (~150 characters). - Save the file, then repeat the process. - Compare the sha256sum of the saved files. The checksums do not match due to missing characters or entire lines. Fix this by restoring the RXTL value to 1 when the UART is used as a console. This ensures timely RX interrupts and reliable data reception in console mode. With this change, pasted content is saved correctly, and checksums are always consistent. Cc: stable Fixes: 7a637784d517 ("serial: imx: reduce RX interrupt frequency") Signed-off-by: Fabio Estevam Reviewed-by: Stefan Wahren Link: https://lore.kernel.org/r/20250619114617.2791939-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman

serial: core: restore of_node information in sysfs

2025-07-06T09:01:43Z

commit d36f0e9a0002f04f4d6dd9be908d58fe5bd3a279 upstream. Since in v6.8-rc1, the of_node symlink under tty devices is missing. This breaks any udev rules relying on this information. Link the of_node information in the serial controller device with the parent defined in the device tree. This will also apply to the serial device which takes the serial controller as a parent device. Fixes: b286f4e87e32 ("serial: core: Move tty and serdev to be children of serial core port device") Cc: stable@vger.kernel.org Signed-off-by: Aidan Stewart Link: https://lore.kernel.org/r/20250617164819.13912-1-astewart@tektelic.com Signed-off-by: Greg Kroah-Hartman

tty: serial: uartlite: register uart driver in init

2025-07-06T09:01:35Z

[ Upstream commit 6bd697b5fc39fd24e2aa418c7b7d14469f550a93 ] When two instances of uart devices are probing, a concurrency race can occur. If one thread calls uart_register_driver function, which first allocates and assigns memory to 'uart_state' member of uart_driver structure, the other instance can bypass uart driver registration and call ulite_assign. This calls uart_add_one_port, which expects the uart driver to be fully initialized. This leads to a kernel panic due to a null pointer dereference: [ 8.143581] BUG: kernel NULL pointer dereference, address: 00000000000002b8 [ 8.156982] #PF: supervisor write access in kernel mode [ 8.156984] #PF: error_code(0x0002) - not-present page [ 8.156986] PGD 0 P4D 0 ... [ 8.180668] RIP: 0010:mutex_lock+0x19/0x30 [ 8.188624] Call Trace: [ 8.188629] ? __die_body.cold+0x1a/0x1f [ 8.195260] ? page_fault_oops+0x15c/0x290 [ 8.209183] ? __irq_resolve_mapping+0x47/0x80 [ 8.209187] ? exc_page_fault+0x64/0x140 [ 8.209190] ? asm_exc_page_fault+0x22/0x30 [ 8.209196] ? mutex_lock+0x19/0x30 [ 8.223116] uart_add_one_port+0x60/0x440 [ 8.223122] ? proc_tty_register_driver+0x43/0x50 [ 8.223126] ? tty_register_driver+0x1ca/0x1e0 [ 8.246250] ulite_probe+0x357/0x4b0 [uartlite] To prevent it, move uart driver registration in to init function. This will ensure that uart_driver is always registered when probe function is called. Signed-off-by: Jakub Lewalski Signed-off-by: Elodie Decerle Link: https://lore.kernel.org/r/20250331160732.2042-1-elodie.decerle@nokia.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

8250: microchip: pci1xxxx: Add PCIe Hot reset disable support for Rev C0 and later devices

2025-07-06T09:01:34Z

[ Upstream commit c40b91e38eb8d4489def095d62ab476d45871323 ] Systems that issue PCIe hot reset requests during a suspend/resume cycle cause PCI1XXXX device revisions prior to C0 to get its UART configuration registers reset to hardware default values. This results in device inaccessibility and data transfer failures. Starting with Revision C0, support was added in the device hardware (via the Hot Reset Disable Bit) to allow resetting only the PCIe interface and its associated logic, but preserving the UART configuration during a hot reset. This patch enables the hot reset disable feature during suspend/ resume for C0 and later revisions of the device. Signed-off-by: Rengarajan S Reviewed-by: Jiri Slaby Link: https://lore.kernel.org/r/20250425145500.29036-1-rengarajan.s@microchip.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin