user/sven/linux.git/drivers/usb/class, branch v4.9.142

usb: cdc-acm: add entry for Hiro (Conexant) modem

2018-11-27T15:09:41Z

commit 63529eaa6164ef7ab4b907b25ac3648177e5e78f upstream. The cdc-acm kernel module currently does not support the Hiro (Conexant) H05228 USB modem. The patch below adds the device specific information: idVendor 0x0572 idProduct 0x1349 Signed-off-by: Maarten Jacobs Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman

cdc-acm: correct counting of UART states in serial state notification

2018-11-10T15:43:00Z

commit f976d0e5747ca65ccd0fb2a4118b193d70aa1836 upstream. The usb standard ("Universal Serial Bus Class Definitions for Communication Devices") distiguishes between "consistent signals" (DSR, DCD), and "irregular signals" (break, ring, parity error, framing error, overrun). The bits of "irregular signals" are set, if this error/event occurred on the device side and are immeadeatly unset, if the serial state notification was sent. Like other drivers of real serial ports do, just the occurence of those events should be counted in serial_icounter_struct (but no 1->0 transitions). Signed-off-by: Tobias Herzog Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman

Revert "usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()"

2018-10-04T00:01:50Z

commit e871db8d78df1c411032cbb3acfdf8930509360e upstream. This reverts commit 6e22e3af7bb3a7b9dc53cb4687659f6e63fca427. The bug the patch describes to, has been already fixed in commit 2df6948428542 ("USB: cdc-wdm: don't enable interrupts in USB-giveback") so need to this, revert it. Fixes: 6e22e3af7bb3 ("usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()") Cc: stable Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman

Revert "cdc-acm: implement put_char() and flush_chars()"

2018-09-26T06:36:37Z

commit df3aa13c7bbb307e172c37f193f9a7aa058d4739 upstream. This reverts commit a81cf9799ad7299b03a4dff020d9685f9ac5f3e0. The patch causes a regression, which I cannot find the reason for. So let's revert for now, as a revert hurts only performance. Original report: I was trying to resolve the problem with Oliver but we don't get any conclusion for 5 months, so I am now sending this to mail list and cdc_acm authors. I am using simple request-response protocol to obtain the boiller parameters in constant intervals. A simple one transaction is: 1. opening the /dev/ttyACM0 2. sending the following 10-bytes request to the device: unsigned char req[] = {0x02, 0xfe, 0x01, 0x05, 0x08, 0x02, 0x01, 0x69, 0xab, 0x03}; 3. reading response (frame of 74 bytes length). 4. closing the descriptor I am doing this transaction with 5 seconds intervals. Before the bad commit everything was working correctly: I've got a requests and a responses in a timely manner. After the bad commit more time I am using the kernel module, more problems I have. The graph [2] is showing the problem. As you can see after module load all seems fine but after about 30 minutes I've got a plenty of EAGAINs when doing read()'s and trying to read back the data. When I rmmod and insmod the cdc_acm module again, then the situation is starting over again: running ok shortly after load, and more time it is running, more EAGAINs I have when calling read(). As a bonus I can see the problem on the device itself: The device is configured as you can see here on this screen [3]. It has two transmision LEDs: TX and RX. Blink duration is set for 100ms. This is a recording before the bad commit when all is working fine: [4] And this is with the bad commit: [5] As you can see the TX led is blinking wrongly long (indicating transmission?) and I have problems doing read() calls (EAGAIN). Reported-by: Mariusz Bialonczyk Signed-off-by: Oliver Neukum Fixes: a81cf9799ad7 ("cdc-acm: implement put_char() and flush_chars()") Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: cdc-wdm: Fix a sleep-in-atomic-context bug in service_outstanding_interrupt()

2018-09-26T06:36:37Z

commit 6e22e3af7bb3a7b9dc53cb4687659f6e63fca427 upstream. wdm_in_callback() is a completion handler function for the USB driver. So it should not sleep. But it calls service_outstanding_interrupt(), which calls usb_submit_urb() with GFP_KERNEL. To fix this bug, GFP_KERNEL is replaced with GFP_ATOMIC. This bug is found by my static analysis tool DSAC. Signed-off-by: Jia-Ju Bai Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: cdc_acm: Add quirk for Castles VEGA3000

2018-07-28T05:49:12Z

commit 1445cbe476fc3dd09c0b380b206526a49403c071 upstream. The device (a POS terminal) implements CDC ACM, but has not union descriptor. Signed-off-by: Lubomir Rintel Acked-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: cdc_acm: Add quirk for Uniden UBC125 scanner

2018-07-11T14:26:41Z

commit 4a762569a2722b8a48066c7bacf0e1dc67d17fa1 upstream. Uniden UBC125 radio scanner has USB interface which fails to work with cdc_acm driver: usb 1-1.5: new full-speed USB device number 4 using xhci_hcd cdc_acm 1-1.5:1.0: Zero length descriptor references cdc_acm: probe of 1-1.5:1.0 failed with error -22 Adding the NO_UNION_NORMAL quirk for the device fixes the issue: usb 1-4: new full-speed USB device number 15 using xhci_hcd usb 1-4: New USB device found, idVendor=1965, idProduct=0018 usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-4: Product: UBC125XLT usb 1-4: Manufacturer: Uniden Corp. usb 1-4: SerialNumber: 0001 cdc_acm 1-4:1.0: ttyACM0: USB ACM device `lsusb -v` of the device: Bus 001 Device 015: ID 1965:0018 Uniden Corporation Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x1965 Uniden Corporation idProduct 0x0018 bcdDevice 0.01 iManufacturer 1 Uniden Corp. iProduct 2 UBC125XLT iSerial 3 0001 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 48 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 0 None iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x87 EP 7 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 10 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 0 Device Status: 0x0000 (Bus Powered) Signed-off-by: Houston Yaroschoff Cc: stable Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

usb: cdc_acm: prevent race at write to acm while system resumes

2018-05-25T14:13:01Z

[ Upstream commit b86b8eb6fecb5a4bac1ed0ca925c4082a61ea6e9 ] ACM driver may accept data to transmit while system is not fully resumed. In this case ACM driver buffers data and prepare URBs on usb anchor list. There is a little chance that two tasks put a char and initiate acm_tty_flush_chars(). In such a case, driver will put one URB twice on usb anchor list. This patch also reset length of data before resue of a buffer. This not only prevent sending rubbish, but also lower risc of race. Without this patch we hit following kernel panic in one of our stabilty/stress tests. [ 46.884442] *list_add double add*: new=ffff9b2ab7289330, prev=ffff9b2ab7289330, next=ffff9b2ab81e28e0. [ 46.884476] Modules linked in: hci_uart btbcm bluetooth rfkill_gpio igb_avb(O) cfg80211 snd_soc_sst_bxt_tdf8532 snd_soc_skl snd_soc_skl_ipc snd_soc_sst_ipc snd_soc_sst_dsp snd_soc_sst_acpi snd_soc_sst_match snd_hda_ext_core snd_hda_core trusty_timer trusty_wall trusty_log trusty_virtio trusty_ipc trusty_mem trusty_irq trusty virtio_ring virtio intel_ipu4_mmu_bxtB0 lib2600_mod_bxtB0 intel_ipu4_isys_mod_bxtB0 lib2600psys_mod_bxtB0 intel_ipu4_psys_mod_bxtB0 intel_ipu4_mod_bxtB0 intel_ipu4_wrapper_bxtB0 intel_ipu4_acpi videobuf2_dma_contig as3638 dw9714 lm3643 crlmodule smiapp smiapp_pll [ 46.884480] CPU: 1 PID: 33 Comm: kworker/u8:1 Tainted: G U W O 4.9.56-quilt-2e5dc0ac-g618ed69ced6e-dirty #4 [ 46.884489] Workqueue: events_unbound flush_to_ldisc [ 46.884494] ffffb98ac012bb08 ffffffffad3e82e5 ffffb98ac012bb58 0000000000000000 [ 46.884497] ffffb98ac012bb48 ffffffffad0a23d1 00000024ad6374dd ffff9b2ab7289330 [ 46.884500] ffff9b2ab81e28e0 ffff9b2ab7289330 0000000000000002 0000000000000000 [ 46.884501] Call Trace: [ 46.884507] [] dump_stack+0x67/0x92 [ 46.884511] [] __warn+0xd1/0xf0 [ 46.884513] [] warn_slowpath_fmt+0x5f/0x80 [ 46.884516] [] __list_add+0xb3/0xc0 [ 46.884521] [] *usb_anchor_urb*+0x4c/0xa0 [ 46.884524] [] *acm_tty_flush_chars*+0x8f/0xb0 [ 46.884527] [] *acm_tty_put_char*+0x41/0x100 [ 46.884530] [] tty_put_char+0x24/0x40 [ 46.884533] [] do_output_char+0xa5/0x200 [ 46.884535] [] __process_echoes+0x148/0x290 [ 46.884538] [] n_tty_receive_buf_common+0x57c/0xb00 [ 46.884541] [] n_tty_receive_buf2+0x14/0x20 [ 46.884543] [] tty_ldisc_receive_buf+0x22/0x50 [ 46.884545] [] flush_to_ldisc+0xc5/0xe0 [ 46.884549] [] process_one_work+0x148/0x440 [ 46.884551] [] worker_thread+0x69/0x4a0 [ 46.884554] [] ? max_active_store+0x80/0x80 [ 46.884556] [] kthread+0x110/0x130 [ 46.884559] [] ? kthread_park+0x60/0x60 [ 46.884563] [] ret_from_fork+0x27/0x40 [ 46.884566] ---[ end trace 3bd599058b8a9eb3 ]--- Signed-off-by: Dominik Bozek Signed-off-by: Kuppuswamy Sathyanarayanan Acked-by: Oliver Neukum Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

CDC-ACM: apply quirk for card reader

2018-02-03T16:05:42Z

commit df1cc78a52491f71d8170d513d0f6f114faa1bda upstream. This devices drops random bytes from messages if you talk to it too fast. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

USB: cdc-acm: Do not log urb submission errors on disconnect

2018-02-03T16:05:42Z

commit f0386c083c2ce85284dc0b419d7b89c8e567c09f upstream. When disconnected sometimes the cdc-acm driver logs errors like these: [20278.039417] cdc_acm 2-2:2.1: urb 9 failed submission with -19 [20278.042924] cdc_acm 2-2:2.1: urb 10 failed submission with -19 [20278.046449] cdc_acm 2-2:2.1: urb 11 failed submission with -19 [20278.049920] cdc_acm 2-2:2.1: urb 12 failed submission with -19 [20278.053442] cdc_acm 2-2:2.1: urb 13 failed submission with -19 [20278.056915] cdc_acm 2-2:2.1: urb 14 failed submission with -19 [20278.060418] cdc_acm 2-2:2.1: urb 15 failed submission with -19 Silence these by not logging errors when the result is -ENODEV. Signed-off-by: Hans de Goede Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman