user/sven/linux.git/drivers/usb/host, branch v4.19.108

xhci: apply XHCI_PME_STUCK_QUIRK to Intel Comet Lake platforms

2020-02-28T15:38:50Z

commit a3ae87dce3a5abe0b57c811bab02b2564b574106 upstream. Intel Comet Lake based platform require the XHCI_PME_STUCK_QUIRK quirk as well. Without this xHC can not enter D3 in runtime suspend. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200210134553.9144-5-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: host: xhci: update event ring dequeue pointer on purpose

2020-02-28T15:38:46Z

commit dc0ffbea5729a3abafa577ebfce87f18b79e294b upstream. On some situations, the software handles TRB events slower than adding TRBs, then xhci_handle_event can't return zero long time, the xHC will consider the event ring is full, and trigger "Event Ring Full" error, but in fact, the software has already finished lots of events, just no chance to update ERDP (event ring dequeue pointer). In this commit, we force update ERDP if half of TRBS_PER_SEGMENT events have handled to avoid "Event Ring Full" error. Signed-off-by: Peter Chen Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/1573836603-10871-2-git-send-email-mathias.nyman@linux.intel.com Signed-off-by: Fabio Estevam Signed-off-by: Greg Kroah-Hartman

xhci: Fix memory leak when caching protocol extended capability PSI tables - take 2

2020-02-28T15:38:46Z

commit cf0ee7c60c89641f6e4d1d3c7867fe32b9e30300 upstream. xhci driver assumed that xHC controllers have at most one custom supported speed table (PSI) for all usb 3.x ports. Memory was allocated for one PSI table under the xhci hub structure. Turns out this is not the case, some controllers have a separate "supported protocol capability" entry with a PSI table for each port. This means each usb3 roothub port can in theory support different custom speeds. To solve this, cache all supported protocol capabilities with their PSI tables in an array, and add pointers to the xhci port structure so that every port points to its capability entry in the array. When creating the SuperSpeedPlus USB Device Capability BOS descriptor for the xhci USB 3.1 roothub we for now will use only data from the first USB 3.1 capable protocol capability entry in the array. This could be improved later, this patch focuses resolving the memory leak. Reported-by: Paul Menzel Reported-by: Sajja Venkateswara Rao Fixes: 47189098f8be ("xhci: parse xhci protocol speed ID list for usb 3.1 usage") Cc: stable # v4.4+ Signed-off-by: Mathias Nyman Tested-by: Marek Szyprowski Link: https://lore.kernel.org/r/20200211150158.14475-1-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

xhci: fix runtime pm enabling for quirky Intel hosts

2020-02-28T15:38:46Z

commit 024d411e9c5d49eb96c825af52a3ce2682895676 upstream. Intel hosts that need the XHCI_PME_STUCK_QUIRK flag should enable runtime pm by calling xhci_pme_acpi_rtd3_enable() before usb_hcd_pci_probe() calls pci_dev_run_wake(). Otherwise usage count for the device won't be decreased, and runtime suspend is prevented. usb_hcd_pci_probe() only decreases the usage count if device can generate run-time wake-up events, i.e. when pci_dev_run_wake() returns true. This issue was exposed by pci_dev_run_wake() change in commit 8feaec33b986 ("PCI / PM: Always check PME wakeup capability for runtime wakeup support") and should be backported to kernels with that change Cc: # 4.13+ Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200210134553.9144-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

xhci: Force Maximum Packet size for Full-speed bulk devices to valid range.

2020-02-28T15:38:45Z

commit f148b9f402ef002b57bcff3964d45abc8ffb6c3f upstream. A Full-speed bulk USB audio device (DJ-Tech CTRL) with a invalid Maximum Packet Size of 4 causes a xHC "Parameter Error" at enumeration. This is because valid Maximum packet sizes for Full-speed bulk endpoints are 8, 16, 32 and 64 bytes. Hosts are not required to support other values than these. See usb 2 specs section 5.8.3 for details. The device starts working after forcing the maximum packet size to 8. This is most likely the case with other devices as well, so force the maximum packet size to a valid range. Cc: stable@vger.kernel.org Reported-by: Rene D Obermueller Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20200210134553.9144-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

usb: host: xhci-hub: fix extra endianness conversion

2020-01-27T13:51:02Z

[ Upstream commit 6269e4c76eacabaea0d0099200ae1a455768d208 ] Don't do extra cpu_to_le32 conversion for put_unaligned_le32 because it is already implemented in this function. Fixes sparse error: xhci-hub.c:1152:44: warning: incorrect type in argument 1 (different base types) xhci-hub.c:1152:44: expected unsigned int [usertype] val xhci-hub.c:1152:44: got restricted __le32 [usertype] Fixes: 395f540 "xhci: support new USB 3.1 hub request to get extended port status" Cc: Mathias Nyman Signed-off-by: Ruslan Bilovol Link: https://lore.kernel.org/r/1562501839-26522-1-git-send-email-ruslan.bilovol@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

USB: EHCI: Do not return -EPIPE when hub is disconnected

2019-12-31T15:36:23Z

commit 64cc3f12d1c7dd054a215bc1ff9cc2abcfe35832 upstream. When disconnecting a USB hub that has some child device(s) connected to it (such as a USB mouse), then the stack tries to clear halt and reset device(s) which are _already_ physically disconnected. The issue has been reproduced with: CPU: IMX6D5EYM10AD or MCIMX6D5EYM10AE. SW: U-Boot 2019.07 and kernel 4.19.40. CPU: HP Proliant Microserver Gen8. SW: Linux version 4.2.3-300.fc23.x86_64 In this situation there will be error bit for MMF active yet the CERR equals EHCI_TUNE_CERR + halt. Existing implementation interprets this as a stall [1] (chapter 8.4.5). The possible conditions when the MMF will be active + halt can be found from [2] (Table 4-13). Fix for the issue is to check whether MMF is active and PID Code is IN before checking for the stall. If these conditions are true then it is not a stall. What happens after the fix is that when disconnecting a hub with attached device(s) the situation is not interpret as a stall. [1] [https://www.usb.org/document-library/usb-20-specification, usb_20.pdf] [2] [https://www.intel.com/content/dam/www/public/us/en/documents/ technical-specifications/ehci-specification-for-usb.pdf] Signed-off-by: Erkka Talvitie Reviewed-by: Alan Stern Cc: stable Link: https://lore.kernel.org/r/ef70941d5f349767f19c0ed26b0dd9eed8ad81bb.1576050523.git.erkka.talvitie@vincit.fi Signed-off-by: Greg Kroah-Hartman

usb: xhci: Fix build warning seen with CONFIG_PM=n

2019-12-31T15:36:18Z

[ Upstream commit 6056a0f8ede27b296d10ef46f7f677cc9d715371 ] The following build warning is seen if CONFIG_PM is disabled. drivers/usb/host/xhci-pci.c:498:13: warning: unused function 'xhci_pci_shutdown' Fixes: f2c710f7dca8 ("usb: xhci: only set D3hot for pci device") Cc: Henry Lin Cc: stable@vger.kernel.org # all stable releases with f2c710f7dca8 Signed-off-by: Guenter Roeck Acked-by: Mathias Nyman Link: https://lore.kernel.org/r/20191218011911.6907-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

xhci: fix USB3 device initiated resume race with roothub autosuspend

2019-12-21T09:57:44Z

commit 057d476fff778f1d3b9f861fdb5437ea1a3cfc99 upstream. A race in xhci USB3 remote wake handling may force device back to suspend after it initiated resume siganaling, causing a missed resume event or warm reset of device. When a USB3 link completes resume signaling and goes to enabled (UO) state a interrupt is issued and the interrupt handler will clear the bus_state->port_remote_wakeup resume flag, allowing bus suspend. If the USB3 roothub thread just finished reading port status before the interrupt, finding ports still in suspended (U3) state, but hasn't yet started suspending the hub, then the xhci interrupt handler will clear the flag that prevented roothub suspend and allow bus to suspend, forcing all port links back to suspended (U3) state. Example case: usb_runtime_suspend() # because all ports still show suspended U3 usb_suspend_both() hub_suspend(); # successful as hub->wakeup_bits not set yet ==> INTERRUPT xhci_irq() handle_port_status() clear bus_state->port_remote_wakeup usb_wakeup_notification() sets hub->wakeup_bits; kick_hub_wq() <== END INTERRUPT hcd_bus_suspend() xhci_bus_suspend() # success as port_remote_wakeup bits cleared Fix this by increasing roothub usage count during port resume to prevent roothub autosuspend, and by making sure bus_state->port_remote_wakeup flag is only cleared after resume completion is visible, i.e. after xhci roothub returned U0 or other non-U3 link state link on a get port status request. Issue rootcaused by Chiasheng Lee Cc: Cc: Lee, Hou-hsun Reported-by: Lee, Chiasheng Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20191211142007.8847-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman

xhci: make sure interrupts are restored to correct state

2019-12-17T19:35:26Z

[ Upstream commit bd82873f23c9a6ad834348f8b83f3b6a5bca2c65 ] spin_unlock_irqrestore() might be called with stale flags after reading port status, possibly restoring interrupts to a incorrect state. If a usb2 port just finished resuming while the port status is read the spin lock will be temporary released and re-acquired in a separate function. The flags parameter is passed as value instead of a pointer, not updating flags properly before the final spin_unlock_irqrestore() is called. Cc: # v3.12+ Fixes: 8b3d45705e54 ("usb: Fix xHCI host issues on remote wakeup.") Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20191211142007.8847-7-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin