user/sven/linux.git/drivers/usb/serial, branch stable/4.3.y

USB: option: fix Cinterion AHxx enumeration

2016-02-19T22:28:33Z

commit 4152b387da81617c80cb2946b2d56e3958906b3e upstream. In certain kernel configurations where the cdc_ether and option drivers are compiled as modules there can occur a race condition in enumeration. This causes the option driver to enumerate the ethernet(wwan) interface as usb-serial interfaces. usb-devices output for the modem: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=0055 Rev=00.00 S: Manufacturer=Cinterion S: Product=AHx C: #Ifs= 6 Cfg#= 1 Atr=e0 MxPwr=10mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether Signed-off-by: John Ernberg Fixes: 1941138e1c02 ("USB: added support for Cinterion's products...") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: option: Adding support for Telit LE922

2016-02-19T22:28:33Z

commit ff4e2494dc17b173468e1713fdf6237fd8578bc7 upstream. This patch adds support for two PIDs of LE922. Signed-off-by: Daniele Palmas Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: cp210x: add ID for IAI USB to RS485 adaptor

2016-02-19T22:28:33Z

commit f487c54ddd544e1c9172cd510954f697b77b76e3 upstream. Added the USB serial console device ID for IAI Corp. RCB-CV-USB USB to RS485 adaptor. Signed-off-by: Peter Dedecker Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: ftdi_sio: add support for Yaesu SCU-18 cable

2016-02-19T22:28:33Z

commit e03cdf22a2727c60307be6a729233edab3bfda9c upstream. Harald Linden reports that the ftdi_sio driver works properly for the Yaesu SCU-18 cable if the device ids are added to the driver. So let's add them. Reported-by: Harald Linden Signed-off-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: visor: fix null-deref at probe

2016-02-19T22:28:33Z

commit cac9b50b0d75a1d50d6c056ff65c005f3224c8e0 upstream. Fix null-pointer dereference at probe should a (malicious) Treo device lack the expected endpoints. Specifically, the Treo port-setup hack was dereferencing the bulk-in and interrupt-in urbs without first making sure they had been allocated by core. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: visor: fix crash on detecting device without write_urbs

2016-02-19T22:28:33Z

commit cb3232138e37129e88240a98a1d2aba2187ff57c upstream. The visor driver crashes in clie_5_attach() when a specially crafted USB device without bulk-out endpoint is detected. This fix adds a check that the device has proper configuration expected by the driver. Reported-by: Ralf Spenneberg Signed-off-by: Vladis Dronov Fixes: cfb8da8f69b8 ("USB: visor: fix initialisation of UX50/TH55 devices") Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: cp210x: add ID for ELV Marble Sound Board 1

2016-01-31T19:25:49Z

commit f7d7f59ab124748156ea551edf789994f05da342 upstream. Add the USB device ID for ELV Marble Sound Board 1. Signed-off-by: Oliver Freyermuth Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: ipaq.c: fix a timeout loop

2016-01-31T19:25:49Z

commit abdc9a3b4bac97add99e1d77dc6d28623afe682b upstream. The code expects the loop to end with "retries" set to zero but, because it is a post-op, it will end set to -1. I have fixed this by moving the decrement inside the loop. Fixes: 014aa2a3c32e ('USB: ipaq: minor ipaq_open() cleanup.') Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman

USB: cp210x: Remove CP2110 ID from compatibility list

2016-01-23T04:55:42Z

commit 7c90e610b60cd1ed6abafd806acfaedccbbe52d1 upstream. CP2110 ID (0x10c4, 0xea80) doesn't belong here because it's a HID and completely different from CP210x devices. Signed-off-by: Konstantin Shkolnyy Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: Another Infineon flash loader USB ID

2016-01-23T04:55:42Z

commit a0e80fbd56b4573de997c9a088a33abbc1121400 upstream. The flash loader has been seen on a Telit UE910 modem. The flash loader is a bit special, it presents both an ACM and CDC Data interface but only the latter is useful. Unless a magic string is sent to the device it will disappear and the regular modem device appears instead. Signed-off-by: Jonas Jonsson Tested-by: Daniele Palmas Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman