user/sven/linux.git/drivers/usb/serial, branch v3.8.4

qcserial: bind to DM/DIAG port on Gobi 1K devices

2013-03-20T20:10:53Z

commit 3f8bc5e4da29c7e05edeca6b475abb4fb01a5a13 upstream. Turns out we just need altsetting 1 and then we can talk to it. Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman

usb: serial: Add Rigblaster Advantage to device table

2013-03-20T20:10:52Z

commit a57e82a18779ab8a5e5a1f5841cef937cf578913 upstream. The Rigblaster Advantage is an amateur radio interface sold by West Mountain Radio. It contains a cp210x serial interface but the device ID is not in the driver. Signed-off-by: Steve Conklin Signed-off-by: Greg Kroah-Hartman

USB: added support for Cinterion's products AH6 and PLS8

2013-03-20T20:10:52Z

commit 1941138e1c024ecb5bd797d414928d3eb94d8662 upstream. add support for Cinterion's products AH6 and PLS8 by adding Product IDs and USB_DEVICE tuples. Signed-off-by: Christian Schmiedl Signed-off-by: Greg Kroah-Hartman

usb: cp210x new Vendor/Device IDs

2013-03-20T20:10:52Z

commit be3101c23394af59694c8a2aae6d07f5da62fea5 upstream. This patch adds support for the Lake Shore Cryotronics devices to the CP210x driver. These lines are ported from cp210x driver distributed by Lake Shore web site: http://www.lakeshore.com/Documents/Lake%20Shore%20cp210x-3.0.0.tar.gz and licensed under the terms of GPLv2. Moreover, I've tested this changes with Lake Shore 335 in my labs. Signed-off-by: Matwey V. Kornilov Signed-off-by: Greg Kroah-Hartman

USB: option: add Huawei E5331

2013-03-20T20:10:52Z

commit daec90e7382cbd0e73eb6861109b3da91e5ab1f3 upstream. Another device using CDC ACM with vendor specific protocol to mark serial functions. Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman

qcaux: add Franklin U600

2013-03-20T20:10:51Z

commit 2d90e63603ac235aecd7d20e234616e0682c8b1f upstream. 4 ports; AT/PPP is standard CDC-ACM. The other three (added by this patch) are QCDM/DIAG, possibly GPS, and unknown. Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman

USB: option: add Huawei "ACM" devices using protocol = vendor

2013-02-28T13:38:42Z

commit 1f3f687722fd9b29a0c2a85b4844e3b2a3585c63 upstream. The USB device descriptor of one identity presented by a few Huawei morphing devices have serial functions with class codes 02/02/ff, indicating CDC ACM with a vendor specific protocol. This combination is often used for MSFT RNDIS functions, and the CDC ACM class driver will therefore ignore such functions. The CDC ACM class driver cannot support functions with only 2 endpoints. The underlying serial functions of these modems are also believed to be the same as for alternate device identities already supported by the option driver. Letting the same driver handle these functions independently of the current identity ensures consistent handling and user experience. There is no need to blacklist these devices in the rndis_host driver. Huawei serial functions will either have only 2 endpoints or a CDC ACM functional descriptor with bmCapabilities != 0, making them correctly ignored as "non RNDIS" by that driver. Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman

USB: option: add Yota / Megafon M100-1 4g modem

2013-02-28T13:38:42Z

commit cd565279e51bedee1b2988e84f9b3bef485adeb6 upstream. Interface layout: 00 CD-ROM 01 debug COM port 02 AP control port 03 modem 04 usb-ethernet Bus=01 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=0408 ProdID=ea42 Rev= 0.00 S: Manufacturer=Qualcomm, Incorporated S: Product=Qualcomm CDMA Technologies MSM S: SerialNumber=353568051xxxxxx C:* #Ifs= 5 Cfg#= 1 Atr=e0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman

USB: option: add and update Alcatel modems

2013-02-28T13:38:42Z

commit f8f0302bbcbd1b14655bef29f6996a2152be559d upstream. Adding three currently unsupported modems based on information from .inf driver files: Diag VID_1BBB&PID_0052&MI_00 AGPS VID_1BBB&PID_0052&MI_01 VOICE VID_1BBB&PID_0052&MI_02 AT VID_1BBB&PID_0052&MI_03 Modem VID_1BBB&PID_0052&MI_05 wwan VID_1BBB&PID_0052&MI_06 Diag VID_1BBB&PID_00B6&MI_00 AT VID_1BBB&PID_00B6&MI_01 Modem VID_1BBB&PID_00B6&MI_02 wwan VID_1BBB&PID_00B6&MI_03 Diag VID_1BBB&PID_00B7&MI_00 AGPS VID_1BBB&PID_00B7&MI_01 VOICE VID_1BBB&PID_00B7&MI_02 AT VID_1BBB&PID_00B7&MI_03 Modem VID_1BBB&PID_00B7&MI_04 wwan VID_1BBB&PID_00B7&MI_05 Updating the blacklist info for the X060S_X200 and X220_X500D, reserving interfaces for a wwan driver, based on wwan VID_1BBB&PID_0000&MI_04 wwan VID_1BBB&PID_0017&MI_06 Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman

USB: serial: fix null-pointer dereferences on disconnect

2013-02-28T13:38:29Z

commit b2ca699076573c94fee9a73cb0d8645383b602a0 upstream. Make sure serial-driver dtr_rts is called with disc_mutex held after checking the disconnected flag. Due to a bug in the tty layer, dtr_rts may get called after a device has been disconnected and the tty-device unregistered. Some drivers have had individual checks for disconnect to make sure the disconnected interface was not accessed, but this should really be handled in usb-serial core (at least until the long-standing tty-bug has been fixed). Note that the problem has been made more acute with commit 0998d0631001 ("device-core: Ensure drvdata = NULL when no driver is bound") as the port data is now also NULL when dtr_rts is called resulting in further oopses. Reported-by: Chris Ruehl Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman