user/sven/linux.git/drivers/usb/serial, branch v4.14.186

USB: serial: option: add Telit LE910C1-EUX compositions

2020-06-11T07:23:00Z

commit 399ad9477c523f721f8e51d4f824bdf7267f120c upstream. Add Telit LE910C1-EUX compositions: 0x1031: tty, tty, tty, rmnet 0x1033: tty, tty, tty, ecm Signed-off-by: Daniele Palmas Link: https://lore.kernel.org/r/20200525211106.27338-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: usb_wwan: do not resubmit rx urb on fatal errors

2020-06-11T07:22:59Z

commit 986c1748c84d7727defeaeca74a73b37f7d5cce1 upstream. usb_wwan_indat_callback() shouldn't resubmit rx urb if the previous urb status is a fatal error. Or the usb controller would keep processing the new urbs then run into interrupt storm, and has no chance to recover. Fixes: 6c1ee66a0b2b ("USB-Serial: Fix error handling of usb_wwan") Cc: stable@vger.kernel.org Signed-off-by: Bin Liu Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: qcserial: add DW5816e QDL support

2020-06-11T07:22:59Z

commit 3429444abdd9dbd5faebd9bee552ec6162b17ad6 upstream. Add support for Dell Wireless 5816e Download Mode (AKA boot & hold mode / QDL download mode) to drivers/usb/serial/qcserial.c This is required to update device firmware. Signed-off-by: Matt Jolly Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: garmin_gps: add sanity checking for data length

2020-05-20T06:16:57Z

commit e9b3c610a05c1cdf8e959a6d89c38807ff758ee6 upstream. We must not process packets shorter than a packet ID Signed-off-by: Oliver Neukum Reported-and-tested-by: syzbot+d29e9263e13ce0b9f4fd@syzkaller.appspotmail.com Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: qcserial: Add DW5816e support

2020-05-20T06:16:52Z

commit 78d6de3cfbd342918d31cf68d0d2eda401338aef upstream. Add support for Dell Wireless 5816e to drivers/usb/serial/qcserial.c Signed-off-by: Matt Jolly Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: io_edgeport: fix slab-out-of-bounds read in edge_interrupt_callback

2020-04-02T14:34:34Z

commit 57aa9f294b09463492f604feaa5cc719beaace32 upstream. Fix slab-out-of-bounds read in the interrupt-URB completion handler. The boundary condition should be (length - 1) as we access data[position + 1]. Reported-and-tested-by: syzbot+37ba33391ad5f3935bbd@syzkaller.appspotmail.com Signed-off-by: Qiujun Huang Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add Wistron Neweb D19Q1

2020-04-02T14:34:33Z

commit dfee7e2f478346b12ea651d5c28b069f6a4af563 upstream. This modem is embedded on dlink dwr-960 router. The oem configuration states: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=d191 Rev=ff.ff S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution Signed-off-by: Pawel Dembicki Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add BroadMobi BM806U

2020-04-02T14:34:33Z

commit 6cb2669cb97fc4fdf526127159ac59caae052247 upstream. BroadMobi BM806U is an Qualcomm MDM9225 based 3G/4G modem. Tested hardware BM806U is mounted on D-Link DWR-921-C3 router. T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2020 ProdID=2033 Rev= 2.28 S: Manufacturer=Mobile Connect S: Product=Mobile Connect S: SerialNumber=f842866cfd5a C:* #Ifs= 5 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Co-developed-by: Cezary Jackiewicz Signed-off-by: Cezary Jackiewicz Signed-off-by: Pawel Dembicki Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add support for ASKEY WWHC050

2020-04-02T14:34:33Z

commit 007d20dca2376a751b1dad03442f118438b7e65e upstream. ASKEY WWHC050 is a mcie LTE modem. The oem configuration states: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1690 ProdID=7588 Rev=ff.ff S: Manufacturer=Android S: Product=Android S: SerialNumber=813f0eef6e6e C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution. Co-developed-by: Cezary Jackiewicz Signed-off-by: Cezary Jackiewicz Signed-off-by: Pawel Dembicki Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: pl2303: add device-id for HP LD381

2020-04-02T14:34:16Z

commit cecc113c1af0dd41ccf265c1fdb84dbd05e63423 upstream. Add a device id for HP LD381 Display LD381: 03f0:0f7f Signed-off-by: Scott Chen Cc: stable Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman