user/sven/linux.git/drivers/usb, branch v3.18.79

usb: xhci: Handle error condition in xhci_stop_device()

2017-11-02T08:36:48Z

commit b3207c65dfafae27e7c492cb9188c0dc0eeaf3fd upstream. xhci_stop_device() calls xhci_queue_stop_endpoint() multiple times without checking the return value. xhci_queue_stop_endpoint() can return error if the HC is already halted or unable to queue commands. This can cause a deadlock condition as xhci_stop_device() would end up waiting indefinitely for a completion for the command that didn't get queued. Fix this by checking the return value and bailing out of xhci_stop_device() in case of error. This patch happens to fix potential memory leaks of the allocated command structures as well. Fixes: c311e391a7ef ("xhci: rework command timeout and cancellation,") Signed-off-by: Mayank Rana Signed-off-by: Jack Pham Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman

usb: hub: Allow reset retry for USB2 devices on connect bounce

2017-10-27T08:17:23Z

commit 1ac7db63333db1eeff901bfd6bbcd502b4634fa4 upstream. If the connect status change is set during reset signaling, but the status remains connected just retry port reset. This solves an issue with connecting a 90W HP Thunderbolt 3 dock with a Lenovo Carbon x1 (5th generation) which causes a 30min loop of a high speed device being re-discovererd before usb ports starts working. [...] [ 389.023845] usb 3-1: new high-speed USB device number 55 using xhci_hcd [ 389.491841] usb 3-1: new high-speed USB device number 56 using xhci_hcd [ 389.959928] usb 3-1: new high-speed USB device number 57 using xhci_hcd [...] This is caused by a high speed device that doesn't successfully go to the enabled state after the second port reset. Instead the connection bounces (connected, with connect status change), bailing out completely from enumeration just to restart from scratch. Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1716332 Signed-off-by: Mathias Nyman Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

usb: quirks: add quirk for WORLDE MINI MIDI keyboard

2017-10-27T08:17:23Z

commit 2811501e6d8f5747d08f8e25b9ecf472d0dc4c7d upstream. This keyboard doesn't implement Get String descriptors properly even though string indexes are valid. What happens is that when requesting for the String descriptor, the device disconnects and reconnects. Without this quirk, this loop will continue forever. Cc: Alan Stern Reported-by: Владимир Мартьянов Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: cdc_acm: Add quirk for Elatec TWN3

2017-10-27T08:17:23Z

commit 765fb2f181cad669f2beb87842a05d8071f2be85 upstream. Elatec TWN3 has the union descriptor on data interface. This results in failure to bind the device to the driver with the following log: usb 1-1.2: new full speed USB device using streamplug-ehci and address 4 usb 1-1.2: New USB device found, idVendor=09d8, idProduct=0320 usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.2: Product: RFID Device (COM) usb 1-1.2: Manufacturer: OEM cdc_acm 1-1.2:1.0: Zero length descriptor references cdc_acm: probe of 1-1.2:1.0 failed with error -22 Adding the NO_UNION_NORMAL quirk for the device fixes the issue. `lsusb -v` of the device: Bus 001 Device 003: ID 09d8:0320 Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 32 idVendor 0x09d8 idProduct 0x0320 bcdDevice 3.00 iManufacturer 1 OEM iProduct 2 RFID Device (COM) iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 67 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 250mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 2 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 Unused bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 CDC Header: bcdCDC 1.10 CDC Call Management: bmCapabilities 0x03 call management use DataInterface bDataInterface 1 CDC ACM: bmCapabilities 0x06 sends break line coding and serial state CDC Union: bMasterInterface 0 bSlaveInterface 1 Device Status: 0x0000 (Bus Powered) Signed-off-by: Maksim Salau Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

USB: serial: metro-usb: add MS7820 device id

2017-10-27T08:17:22Z

commit 31dc3f819bac28a0990b36510197560258ab7421 upstream. Add device-id entry for (Honeywell) Metrologic MS7820 bar code scanner. The device has two interfaces (in this mode?); a vendor-specific interface with two interrupt endpoints and a second HID interface, which we do not bind to. Reported-by: Ladislav Dobrovsky Tested-by: Ladislav Dobrovsky Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: core: fix out-of-bounds access bug in usb_get_bos_descriptor()

2017-10-27T08:17:22Z

commit 1c0edc3633b56000e18d82fc241e3995ca18a69e upstream. Andrey used the syzkaller fuzzer to find an out-of-bounds memory access in usb_get_bos_descriptor(). The code wasn't checking that the next usb_dev_cap_header structure could fit into the remaining buffer space. This patch fixes the error and also reduces the bNumDeviceCaps field in the header to match the actual number of capabilities found, in cases where there are fewer than expected. Reported-by: Andrey Konovalov Signed-off-by: Alan Stern Tested-by: Andrey Konovalov Signed-off-by: Greg Kroah-Hartman

USB: devio: Revert "USB: devio: Don't corrupt user memory"

2017-10-27T08:17:22Z

commit 845d584f41eac3475c21e4a7d5e88d0f6e410cf7 upstream. Taking the uurb->buffer_length userspace passes in as a maximum for the actual urbs transfer_buffer_length causes 2 serious issues: 1) It breaks isochronous support for all userspace apps using libusb, as existing libusb versions pass in 0 for uurb->buffer_length, relying on the kernel using the lenghts of the usbdevfs_iso_packet_desc descriptors passed in added together as buffer length. This for example causes redirection of USB audio and Webcam's into virtual machines using qemu-kvm to no longer work. This is a userspace ABI break and as such must be reverted. Note that the original commit does not protect other users / the kernels memory, it only stops the userspace process making the call from shooting itself in the foot. 2) It may cause the kernel to program host controllers to DMA over random memory. Just as the devio code used to only look at the iso_packet_desc lenghts, the host drivers do the same, relying on the submitter of the urbs to make sure the entire buffer is large enough and not checking transfer_buffer_length. But the "USB: devio: Don't corrupt user memory" commit now takes the userspace provided uurb->buffer_length for the buffer-size while copying over the user-provided iso_packet_desc lengths 1:1, allowing the user to specify a small buffer size while programming the host controller to dma a lot more data. (Atleast the ohci, uhci, xhci and fhci drivers do not check transfer_buffer_length for isoc transfers.) This reverts commit fa1ed74eb1c2 ("USB: devio: Don't corrupt user memory") fixing both these issues. Cc: Dan Carpenter Signed-off-by: Hans de Goede Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman

Revert "usb: gadget: inode.c: fix unbalanced spin_lock in ep0_write"

2017-10-18T07:15:17Z

This reverts commit abb540b5397674243994c5327146b6fed7339b71 which is commit b7bd98b7db9f upstream. I had added it to make another patch apply cleanly, but as Ben points out, that was wrong. Reported-by: Ben Hutchings Reported-by: kbuild test robot Cc: David Eccher Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org

USB: serial: console: fix use-after-free after failed setup

2017-10-18T07:15:16Z

commit 299d7572e46f98534033a9e65973f13ad1ce9047 upstream. Make sure to reset the USB-console port pointer when console setup fails in order to avoid having the struct usb_serial be prematurely freed by the console code when the device is later disconnected. Fixes: 73e487fdb75f ("[PATCH] USB console: fix disconnection issues") Acked-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: qcserial: add Dell DW5818, DW5819

2017-10-18T07:15:16Z

commit f5d9644c5fca7d8e8972268598bb516a7eae17f9 upstream. Dell Wireless 5819/5818 devices are re-branded Sierra Wireless MC74 series which will by default boot with vid 0x413c and pid's 0x81cf, 0x81d0, 0x81d1, 0x81d2. Signed-off-by: Shrirang Bagul Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman