user/sven/linux.git/drivers/usb, branch v3.8.4

qcserial: bind to DM/DIAG port on Gobi 1K devices

2013-03-20T20:10:53Z

commit 3f8bc5e4da29c7e05edeca6b475abb4fb01a5a13 upstream. Turns out we just need altsetting 1 and then we can talk to it. Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman

USB: EHCI: don't check DMA values in QH overlays

2013-03-20T20:10:53Z

commit feca7746d5d9e84b105a613b7f3b6ad00d327372 upstream. This patch (as1661) fixes a rather obscure bug in ehci-hcd. In a couple of places, the driver compares the DMA address stored in a QH's overlay region with the address of a particular qTD, in order to see whether that qTD is the one currently being processed by the hardware. (If it is then the status in the QH's overlay region is more up-to-date than the status in the qTD, and if it isn't then the overlay's value needs to be adjusted when the QH is added back to the active schedule.) However, DMA address in the overlay region isn't always valid. It sometimes will contain a stale value, which may happen by coincidence to be equal to a qTD's DMA address. Instead of checking the DMA address, we should check whether the overlay region is active and valid. The patch tests the ACTIVE bit in the overlay, and clears this bit when the overlay becomes invalid (which happens when the currently-executing URB is unlinked). This is the second part of a fix for the regression reported at: https://bugs.launchpad.net/bugs/1088733 Signed-off-by: Alan Stern Reported-by: Joseph Salisbury Reported-and-tested-by: Stephen Thirlwall Signed-off-by: Greg Kroah-Hartman

USB: storage: fix Huawei mode switching regression

2013-03-20T20:10:52Z

commit ab4b71644a26d1ab92b987b2fd30e17c25e89f85 upstream. This reverts commit 200e0d99 ("USB: storage: optimize to match the Huawei USB storage devices and support new switch command" and the followup bugfix commit cd060956 ("USB: storage: properly handle the endian issues of idProduct"). The commit effectively added a large number of Huawei devices to the deprecated usb-storage mode switching logic. Many of these devices have been in use and supported by the userspace usb_modeswitch utility for years. Forcing the switching inside the kernel causes a number of regressions as a result of ignoring existing onfigurations, and also completely takes away the ability to configure mode switching per device/system/user. Known regressions caused by this: - Some of the devices support multiple modes, using different switching commands. There are existing configurations taking advantage of this. - There is a real use case for disabling mode switching and instead mounting the exposed storage device. This becomes impossible with switching logic inside the usb-storage driver. - At least on device fail as a result of the usb-storage switching command, becoming completely unswitchable. This is possibly a firmware bug, but still a regression because the device work as expected using usb_modeswitch defaults. In-kernel mode switching was deprecated years ago with the development of the more user friendly userspace alternatives. The existing list of devices in usb-storage was only kept to prevent breaking already working systems. The long term plan is to remove the list, not to add to it. Ref: http://permalink.gmane.org/gmane.linux.usb.general/28543 Signed-off-by: Bjørn Mork Cc: Signed-off-by: Greg Kroah-Hartman

usb: serial: Add Rigblaster Advantage to device table

2013-03-20T20:10:52Z

commit a57e82a18779ab8a5e5a1f5841cef937cf578913 upstream. The Rigblaster Advantage is an amateur radio interface sold by West Mountain Radio. It contains a cp210x serial interface but the device ID is not in the driver. Signed-off-by: Steve Conklin Signed-off-by: Greg Kroah-Hartman

USB: added support for Cinterion's products AH6 and PLS8

2013-03-20T20:10:52Z

commit 1941138e1c024ecb5bd797d414928d3eb94d8662 upstream. add support for Cinterion's products AH6 and PLS8 by adding Product IDs and USB_DEVICE tuples. Signed-off-by: Christian Schmiedl Signed-off-by: Greg Kroah-Hartman

usb: cp210x new Vendor/Device IDs

2013-03-20T20:10:52Z

commit be3101c23394af59694c8a2aae6d07f5da62fea5 upstream. This patch adds support for the Lake Shore Cryotronics devices to the CP210x driver. These lines are ported from cp210x driver distributed by Lake Shore web site: http://www.lakeshore.com/Documents/Lake%20Shore%20cp210x-3.0.0.tar.gz and licensed under the terms of GPLv2. Moreover, I've tested this changes with Lake Shore 335 in my labs. Signed-off-by: Matwey V. Kornilov Signed-off-by: Greg Kroah-Hartman

usb: dwc3: core: don't forget to free coherent memory

2013-03-20T20:10:52Z

commit d9b4330adec006c2e8907bdcacd9dcc0e8874d18 upstream. commit 3921426 (usb: dwc3: core: move event buffer allocation out of dwc3_core_init()) introduced a memory leak of the coherent memory we use as event buffers on dwc3 driver. If the driver is compiled as a dynamically loadable module and use constantly loads and unloads the driver, we will continue to leak the coherent memory allocated during ->probe() because dwc3_free_event_buffers() is never called during ->remove(). Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

USB: cdc-wdm: fix buffer overflow

2013-03-20T20:10:52Z

commit c0f5ecee4e741667b2493c742b60b6218d40b3aa upstream. The buffer for responses must not overflow. If this would happen, set a flag, drop the data and return an error after user space has read all remaining data. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman

USB: option: add Huawei E5331

2013-03-20T20:10:52Z

commit daec90e7382cbd0e73eb6861109b3da91e5ab1f3 upstream. Another device using CDC ACM with vendor specific protocol to mark serial functions. Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman

qcaux: add Franklin U600

2013-03-20T20:10:51Z

commit 2d90e63603ac235aecd7d20e234616e0682c8b1f upstream. 4 ports; AT/PPP is standard CDC-ACM. The other three (added by this patch) are QCDM/DIAG, possibly GPS, and unknown. Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman