user/sven/linux.git/drivers/usb, branch v4.14.26

usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx path

2018-02-28T09:19:43Z

commit 17aa31f13cad25daa19d3f923323f552e87bc874 upstream. This fixes an issue that a gadget driver (usb_f_fs) is possible to stop rx transactions after the usb-dmac is used because the following functions missed to set/check the "running" flag. - usbhsf_dma_prepare_pop_with_usb_dmac() - usbhsf_dma_pop_done_with_usb_dmac() So, if next transaction uses pio, the usbhsf_prepare_pop() can not start the transaction because the "running" flag is 0. Fixes: 8355b2b3082d ("usb: renesas_usbhs: fix the behavior of some usbhs_pkt_handle") Cc: # v3.19+ Signed-off-by: Yoshihiro Shimoda Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_fs: Use config_ep_by_speed()

2018-02-28T09:19:43Z

commit 675272d092e4a5570bace92593776f7348daf4c5 upstream. In commit 2bfa0719ac2a ("usb: gadget: function: f_fs: pass companion descriptor along") there is a pointer arithmetic bug where the comp_desc is obtained as follows: comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds + USB_DT_ENDPOINT_SIZE); Since ds is a pointer to usb_endpoint_descriptor, adding 7 to it ends up going out of bounds (7 * sizeof(struct usb_endpoint_descriptor), which is actually 7*9 bytes) past the SS descriptor. As a result the maxburst value will be read incorrectly, and the UDC driver will also get a garbage comp_desc (assuming it uses it). Since Felipe wrote, "Eventually, f_fs.c should be converted to use config_ep_by_speed() like all other functions, though", let's finally do it. This allows the other usb_ep fields to be properly populated, such as maxpacket and mult. It also eliminates the awkward speed-based descriptor lookup since config_ep_by_speed() does that already using the ones found in struct usb_function. Fixes: 2bfa0719ac2a ("usb: gadget: function: f_fs: pass companion descriptor along") Cc: stable@vger.kernel.org Signed-off-by: Jack Pham Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: gadget: f_fs: Process all descriptors during bind

2018-02-28T09:19:43Z

commit 6cf439e0d37463e42784271179c8a308fd7493c6 upstream. During _ffs_func_bind(), the received descriptors are evaluated to prepare for binding with the gadget in order to allocate endpoints and optionally set up OS descriptors. However, the high- and super-speed descriptors are only parsed based on whether the gadget_is_dualspeed() and gadget_is_superspeed() calls are true, respectively. This is a problem in case a userspace program always provides all of the {full,high,super,OS} descriptors when configuring a function. Then, for example if a gadget device is not capable of SuperSpeed, the call to ffs_do_descs() for the SS descriptors is skipped, resulting in an incorrect offset calculation for the vla_ptr when moving on to the OS descriptors that follow. This causes ffs_do_os_descs() to fail as it is now looking at the SS descriptors' offset within the raw_descs buffer instead. _ffs_func_bind() should evaluate the descriptors unconditionally, so remove the checks for gadget speed. Fixes: f0175ab51993 ("usb: gadget: f_fs: OS descriptors support") Cc: stable@vger.kernel.org Co-Developed-by: Mayank Rana Signed-off-by: Mayank Rana Signed-off-by: Jack Pham Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

Revert "usb: musb: host: don't start next rx urb if current one failed"

2018-02-28T09:19:43Z

commit 44eb5e12b845cc8a0634f21b70ef07d774eb4b25 upstream. This reverts commit dbac5d07d13e330e6706813c9fde477140fb5d80. commit dbac5d07d13e ("usb: musb: host: don't start next rx urb if current one failed") along with commit b5801212229f ("usb: musb: host: clear rxcsr error bit if set") try to solve the issue described in [1], but the latter alone is sufficient, and the former causes the issue as in [2], so now revert it. [1] https://marc.info/?l=linux-usb&m=146173995117456&w=2 [2] https://marc.info/?l=linux-usb&m=151689238420622&w=2 Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman

usb: ldusb: add PIDs for new CASSY devices supported by this driver

2018-02-28T09:19:43Z

commit 52ad2bd8918158266fc88a05f95429b56b6a33c5 upstream. This patch adds support for new CASSY devices to the ldusb driver. The PIDs are also added to the ignore list in hid-quirks. Signed-off-by: Karsten Koop Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: dwc3: ep0: Reset TRB counter for ep0 IN

2018-02-28T09:19:43Z

commit f035d139ffece7b6a7b8bfb17bd0ba715ee57a04 upstream. DWC3 tracks TRB counter for each ep0 direction separately. In control read transfer completion handler, the driver needs to reset the TRB enqueue counter for ep0 IN direction. Currently the driver only resets the TRB counter for control OUT endpoint. Check for the data direction and properly reset the TRB counter from correct control endpoint. Cc: stable@vger.kernel.org Fixes: c2da2ff00606 ("usb: dwc3: ep0: don't use ep0in for transfers") Signed-off-by: Thinh Nguyen Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: dwc3: gadget: Set maxpacket size for ep0 IN

2018-02-28T09:19:43Z

commit 6180026341e852a250e1f97ebdcf71684a3c81b9 upstream. There are 2 control endpoint structures for DWC3. However, the driver only updates the OUT direction control endpoint structure during ConnectDone event. DWC3 driver needs to update the endpoint max packet size for control IN endpoint as well. If the max packet size is not properly set, then the driver will incorrectly calculate the data transfer size and fail to send ZLP for HS/FS 3-stage control read transfer. The fix is simply to update the max packet size for the ep0 IN direction during ConnectDone event. Cc: stable@vger.kernel.org Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Signed-off-by: Thinh Nguyen Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: host: ehci: use correct device pointer for dma ops

2018-02-28T09:19:42Z

commit 02a10f061a3f8bca1b37332672f50a107198adbe upstream. commit a8c06e407ef9 ("usb: separate out sysdev pointer from usb_bus") converted to use hcd->self.sysdev for DMA operations instead of hcd->self.controller, but forgot to do it for hcd test mode. Replace the correct one in this commit. Fixes: a8c06e407ef9 ("usb: separate out sysdev pointer from usb_bus") Signed-off-by: Peter Chen Acked-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman

Add delay-init quirk for Corsair K70 RGB keyboards

2018-02-28T09:19:42Z

commit 7a1646d922577b5b48c0d222e03831141664bb59 upstream. Following on from this patch: https://lkml.org/lkml/2017/11/3/516, Corsair K70 RGB keyboards also require the DELAY_INIT quirk to start correctly at boot. Device ids found here: usb 3-3: New USB device found, idVendor=1b1c, idProduct=1b13 usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 3-3: Product: Corsair K70 RGB Gaming Keyboard Signed-off-by: Jack Stocker Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks()

2018-02-28T09:19:42Z

commit 46408ea558df13b110e0866b99624384a33bdeba upstream. There is a race condition between finish_unlinks->finish_urb() function and usb_kill_urb() in ohci controller case. The finish_urb calls spin_unlock(&ohci->lock) before usb_hcd_giveback_urb() function call, then if during this time, usb_kill_urb is called for another endpoint, then new ed will be added to ed_rm_list at beginning for unlink, and ed_rm_list will point to newly added. When finish_urb() is completed in finish_unlinks() and ed->td_list becomes empty as in below code (in finish_unlinks() function): if (list_empty(&ed->td_list)) { *last = ed->ed_next; ed->ed_next = NULL; } else if (ohci->rh_state == OHCI_RH_RUNNING) { *last = ed->ed_next; ed->ed_next = NULL; ed_schedule(ohci, ed); } The *last = ed->ed_next will make ed_rm_list to point to ed->ed_next and previously added ed by usb_kill_urb will be left unreferenced by ed_rm_list. This causes usb_kill_urb() hang forever waiting for finish_unlink to remove added ed from ed_rm_list. The main reason for hang in this race condtion is addition and removal of ed from ed_rm_list in the beginning during usb_kill_urb and later last* is modified in finish_unlinks(). As suggested by Alan Stern, the solution for proper handling of ohci->ed_rm_list is to remove ed from the ed_rm_list before finishing any URBs. Then at the end, we can add ed back to the list if necessary. This properly handle the updated ohci->ed_rm_list in usb_kill_urb(). Fixes: 977dcfdc6031 ("USB: OHCI: don't lose track of EDs when a controller dies") Acked-by: Alan Stern CC: Signed-off-by: Aman Deep Signed-off-by: Jeffy Chen Signed-off-by: Greg Kroah-Hartman