user/sven/linux.git/drivers/usb, branch v4.20.9

usb: gadget: musb: fix short isoc packets with inventra dma

2019-02-12T19:02:37Z

commit c418fd6c01fbc5516a2cd1eaf1df1ec86869028a upstream. Handling short packets (length < max packet size) in the Inventra DMA engine in the MUSB driver causes the MUSB DMA controller to hang. An example of a problem that is caused by this problem is when streaming video out of a UVC gadget, only the first video frame is transferred. For short packets (mode-0 or mode-1 DMA), MUSB_TXCSR_TXPKTRDY must be set manually by the driver. This was previously done in musb_g_tx (musb_gadget.c), but incorrectly (all csr flags were cleared, and only MUSB_TXCSR_MODE and MUSB_TXCSR_TXPKTRDY were set). Fixing that problem allows some requests to be transferred correctly, but multiple requests were often put together in one USB packet, and caused problems if the packet size was not a multiple of 4. Instead, set MUSB_TXCSR_TXPKTRDY in dma_controller_irq (musbhsdma.c), just like host mode transfers. This topic was originally tackled by Nicolas Boichat [0] [1] and is discussed further at [2] as part of his GSoC project [3]. [0] https://groups.google.com/forum/?hl=en#!topic/beagleboard-gsoc/k8Azwfp75CU [1] https://gitorious.org/beagleboard-usbsniffer/beagleboard-usbsniffer-kernel/commit/b0be3b6cc195ba732189b04f1d43ec843c3e54c9?p=beagleboard-usbsniffer:beagleboard-usbsniffer-kernel.git;a=patch;h=b0be3b6cc195ba732189b04f1d43ec843c3e54c9 [2] http://beagleboard-usbsniffer.blogspot.com/2010/07/musb-isochronous-transfers-fixed.html [3] http://elinux.org/BeagleBoard/GSoC/USBSniffer Fixes: 550a7375fe72 ("USB: Add MUSB and TUSB support") Signed-off-by: Paul Elder Signed-off-by: Bin Liu Cc: stable Signed-off-by: Greg Kroah-Hartman

usb: gadget: udc: net2272: Fix bitwise and boolean operations

2019-02-12T19:02:36Z

commit 07c69f1148da7de3978686d3af9263325d9d60bd upstream. (!x & y) strikes again. Fix bitwise and boolean operations by enclosing the expression: intcsr & (1 << NET2272_PCI_IRQ) in parentheses, before applying the boolean operator '!'. Notice that this code has been there since 2011. So, it would be helpful if someone can double-check this. This issue was detected with the help of Coccinelle. Fixes: ceb80363b2ec ("USB: net2272: driver for PLX NET2272 USB device controller") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: dwc3: gadget: Handle 0 xfer length for OUT EP

2019-02-12T19:02:36Z

commit 1e19cdc8060227b0802bda6bc0bd22b23679ba32 upstream. For OUT endpoints, zero-length transfers require MaxPacketSize buffer as per the DWC_usb3 programming guide 3.30a section 4.2.3.3. This patch fixes this by explicitly checking zero length transfer to correctly pad up to MaxPacketSize. Fixes: c6267a51639b ("usb: dwc3: gadget: align transfers to wMaxPacketSize") Cc: stable@vger.kernel.org Signed-off-by: Tejas Joglekar Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: phy: am335x: fix race condition in _probe

2019-02-12T19:02:36Z

commit a53469a68eb886e84dd8b69a1458a623d3591793 upstream. power off the phy should be done before populate the phy. Otherwise, am335x_init() could be called by the phy owner to power on the phy first, then am335x_phy_probe() turns off the phy again without the caller knowing it. Fixes: 2fc711d76352 ("usb: phy: am335x: Enable USB remote wakeup using PHY wakeup") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Bin Liu Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman

usb: musb: dsps: fix runtime pm for peripheral mode

2019-02-12T19:02:22Z

[ Upstream commit 54578ee883e34d2d1c518d48f1c1e2dd3f387188 ] Since the runtime PM support was added in musb, dsps relies on the timer calling otg_timer() to activate the usb subsystem. However the driver doesn't enable the timer for peripheral port, then the peripheral port is unable to be enumerated by a host if the other usb port is disabled or in peripheral mode too. So let's start the timer for peripheral port too. Fixes: ea2f35c01d5e ("usb: musb: Fix sleeping function called from invalid context for hdrc glue") Acked-by: Tony Lindgren Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: musb: dsps: fix otg state machine

2019-02-12T19:02:22Z

[ Upstream commit 6010abf2c2c0e382d7e8ee44bd11f343aae90cce ] Due to lack of ID pin interrupt event on AM335x devices, the musb dsps driver uses polling to detect usb device attach for dual-role port. But in the case if a micro-A cable adapter is attached without a USB device attached to the cable, the musb state machine gets stuck in a_wait_vrise state waiting for the MUSB_CONNECT interrupt which won't happen due to the usb device is not attached. The state is stuck in a_wait_vrise even after the micro-A cable is detached, which could cause VBUS retention if then the dual-role port is attached to a host port. To fix the problem, make a_wait_vrise as a transient state, then move the state to either a_wait_bcon for host port or a_idle state for dual-role port, if no usb device is attached to the port. Signed-off-by: Bin Liu Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: renesas_usbhs: add support for RZ/G2E

2019-02-12T19:02:20Z

[ Upstream commit 1d6e81a288e28d8d0e38e0501a324216f79bba35 ] HS-USB found in RZ/G2E (a.k.a. r8a774c0) is very similar to the one found in R-Car E3 (a.k.a. r8a77990), as it needs to release the PLL reset by the UGCTRL register like R-Car E3, therefore add r8a774c0 support in a similar fashion to what was done for the r8a77990. Signed-off-by: Fabrizio Castro Reviewed-by: Simon Horman Acked-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: dwc3: gadget: Disable CSP for stream OUT ep

2019-02-12T19:02:17Z

[ Upstream commit 244add8ebfb231c39db9e33b204bd0ce8f24f782 ] In stream mode, when fast-forwarding TRBs, the stream number is not cleared causing the new stream to not get assigned. So we don't want controller to carry on transfers when short packet is received. So disable the CSP for stream capable endpoint. This is based on the 3.30a Programming guide, where table 3-1 device descriptor structure field definitions says for CSP bit If this bit is 0, the controller generates an XferComplete event and remove the stream. So if we keep CSP as 1 then switching between streams would not happen as in stream mode, when fast-forwarding TRBs, the stream number is not cleared causing the new stream to not get assigned. Signed-off-by: Tejas Joglekar Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin

usb: dwc3: trace: add missing break statement to make compiler happy

2019-02-12T19:02:15Z

[ Upstream commit 54d48183d21e03f780053d7129312049cb5dd591 ] The missed break statement in the outer switch makes the code fall through always and thus always same value will be printed. Besides that, compiler warns about missed fall through marker: drivers/usb/dwc3/./trace.h: In function ‘trace_raw_output_dwc3_log_trb’: drivers/usb/dwc3/./trace.h:246:4: warning: this statement may fall through [-Wimplicit-fallthrough=] switch (pcm) { ^~~~~~ Add the missing break statement to work correctly without compilation warnings. Fixes: fa8d965d736b ("usb: dwc3: trace: pretty print high-bandwidth transfers too") Cc: Felipe Balbi Signed-off-by: Andy Shevchenko Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin

usb: mtu3: fix the issue about SetFeature(U1/U2_Enable)

2019-02-12T19:02:14Z

[ Upstream commit a0678e2eed41e81004308693ac84ea95614b0920 ] Fix the issue: device doesn't accept LGO_U1/U2: 1. set SW_U1/U2_ACCEPT_ENABLE to eanble controller to accept LGO_U1/U2 by default; 2. enable/disable controller to initiate requests for transition into U1/U2 by SW_U1/U2_REQUEST_ENABLE instead of SW_U1/U2_ACCEPT_ENABLE; Signed-off-by: Chunfeng Yun Signed-off-by: Felipe Balbi Signed-off-by: Sasha Levin