user/sven/linux.git/drivers/usb, branch v6.1.41

xhci: Show ZHAOXIN xHCI root hub speed correctly

2023-07-23T11:49:42Z

commit d9b0328d0b8b8298dfdc97cd8e0e2371d4bcc97b upstream. Some ZHAOXIN xHCI controllers follow usb3.1 spec, but only support gen1 speed 5Gbps. While in Linux kernel, if xHCI suspport usb3.1, root hub speed will show on 10Gbps. To fix this issue of ZHAOXIN xHCI platforms, read usb speed ID supported by xHCI to determine root hub speed. And add a quirk XHCI_ZHAOXIN_HOST for this issue. [fix warning about uninitialized symbol -Mathias] Suggested-by: Mathias Nyman Cc: stable@vger.kernel.org Signed-off-by: Weitao Wang Signed-off-by: Mathias Nyman Message-ID: <20230602144009.1225632-11-mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

xhci: Fix TRB prefetch issue of ZHAOXIN hosts

2023-07-23T11:49:42Z

commit 2a865a652299f5666f3b785cbe758c5f57453036 upstream. On some ZHAOXIN hosts, xHCI will prefetch TRB for performance improvement. However this TRB prefetch mechanism may cross page boundary, which may access memory not allocated by xHCI driver. In order to fix this issue, two pages was allocated for a segment and only the first page will be used. And add a quirk XHCI_ZHAOXIN_TRB_FETCH for this issue. Cc: stable@vger.kernel.org Signed-off-by: Weitao Wang Signed-off-by: Mathias Nyman Message-ID: <20230602144009.1225632-10-mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

xhci: Fix resume issue of some ZHAOXIN hosts

2023-07-23T11:49:42Z

commit f927728186f0de1167262d6a632f9f7e96433d1a upstream. On ZHAOXIN ZX-100 project, xHCI can't work normally after resume from system Sx state. To fix this issue, when resume from system Sx state, reinitialize xHCI instead of restore. So, Add XHCI_RESET_ON_RESUME quirk for ZX-100 to fix issue of resuming from system Sx state. Cc: stable@vger.kernel.org Signed-off-by: Weitao Wang Signed-off-by: Mathias Nyman Message-ID: <20230602144009.1225632-9-mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman

usb: typec: ucsi: Mark dGPUs as DEVICE scope

2023-07-19T14:22:12Z

commit a7fbfd44c0204f0629288edfd0d77829edb4a2f8 upstream. power_supply_is_system_supplied() checks whether any power supplies are present that aren't batteries to decide whether the system is running on DC or AC. Downstream drivers use this to make performance decisions. Navi dGPUs include an UCSI function that has been exported since commit 17631e8ca2d3 ("i2c: designware: Add driver support for AMD NAVI GPU"). This UCSI function registers a power supply since commit 992a60ed0d5e ("usb: typec: ucsi: register with power_supply class") but this is not a system power supply. As the power supply for a dGPU is only for powering devices connected to dGPU, create a device property to indicate that the UCSI endpoint is only for the scope of `POWER_SUPPLY_SCOPE_DEVICE`. Link: https://lore.kernel.org/lkml/20230516182541.5836-2-mario.limonciello@amd.com/ Reviewed-by: Evan Quan Tested-by: Evan Quan Signed-off-by: Mario Limonciello Reviewed-by: Heikki Krogerus Reviewed-by: Sebastian Reichel Acked-by: Andi Shyti Signed-off-by: Wolfram Sang Signed-off-by: Greg Kroah-Hartman

Revert "usb: common: usb-conn-gpio: Set last role to unknown before initial detection"

2023-07-19T14:21:56Z

[ Upstream commit df49f2a0ac4a34c0cb4b5c233fcfa0add644c43c ] This reverts commit edd60d24bd858cef165274e4cd6cab43bdc58d15. Heikki reports that this should not be a global flag just to work around one broken driver and should be fixed differently, so revert it. Reported-by: Heikki Krogerus Fixes: edd60d24bd85 ("usb: common: usb-conn-gpio: Set last role to unknown before initial detection") Link: https://lore.kernel.org/r/ZImE4L3YgABnCIsP@kuha.fi.intel.com Cc: Prashanth K Cc: AngeloGioacchino Del Regno Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: dwc3-meson-g12a: Fix an error handling path in dwc3_meson_g12a_probe()

2023-07-19T14:21:55Z

[ Upstream commit 01052b91c9808e3c3b068ae2721cb728ec9aa4c0 ] If dwc3_meson_g12a_otg_init() fails, resources allocated by the previous of_platform_populate() call should be released, as already done in the error handling path. Fixes: 1e355f21d3fb ("usb: dwc3: Add Amlogic A1 DWC3 glue") Signed-off-by: Christophe JAILLET Reviewed-by: Martin Blumenstingl Reviewed-by: Neil Armstrong Message-ID: <9d28466de1808ccc756b4cc25fc72c482d133d13.1686403934.git.christophe.jaillet@wanadoo.fr> Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: common: usb-conn-gpio: Set last role to unknown before initial detection

2023-07-19T14:21:55Z

[ Upstream commit edd60d24bd858cef165274e4cd6cab43bdc58d15 ] Currently if we bootup a device without cable connected, then usb-conn-gpio won't call set_role() since last_role is same as current role. This happens because during probe last_role gets initialised to zero. To avoid this, added a new constant in enum usb_role, last_role is set to USB_ROLE_UNKNOWN before performing initial detection. While at it, also handle default case for the usb_role switch in cdns3, intel-xhci-usb-role-switch & musb/jz4740 to avoid build warnings. Fixes: 4602f3bff266 ("usb: common: add USB GPIO based connection detection driver") Signed-off-by: Prashanth K Reviewed-by: AngeloGioacchino Del Regno Message-ID: <1685544074-17337-1-git-send-email-quic_prashk@quicinc.com> Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: dwc3: qcom: Fix an error handling path in dwc3_qcom_probe()

2023-07-19T14:21:55Z

[ Upstream commit 4a944da707123686d372ec01ea60056902fadf35 ] If dwc3_qcom_create_urs_usb_platdev() fails, some resources still need to be released, as already done in the other error handling path of the probe. Fixes: c25c210f590e ("usb: dwc3: qcom: add URS Host support for sdm845 ACPI boot") Signed-off-by: Christophe JAILLET Reviewed-by: Andrew Halaney Message-ID: Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: dwc3: qcom: Release the correct resources in dwc3_qcom_remove()

2023-07-19T14:21:55Z

[ Upstream commit 8fd95da2cfb5046c4bb5a3cdc9eb7963ba8b10dd ] In the probe, some resources are allocated with dwc3_qcom_of_register_core() or dwc3_qcom_acpi_register_core(). The corresponding resources are already coorectly freed in the error handling path of the probe, but not in the remove function. Fix it. Fixes: 2bc02355f8ba ("usb: dwc3: qcom: Add support for booting with ACPI") Signed-off-by: Christophe JAILLET Reviewed-by: Andrew Halaney Message-ID: Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

usb: hide unused usbfs_notify_suspend/resume functions

2023-07-19T14:21:52Z

[ Upstream commit 8e6bd945e6dde64fbc60ec3fe252164493a8d3a2 ] The declaration is in an #ifdef, which causes warnings when building with 'make W=1' and without CONFIG_PM: drivers/usb/core/devio.c:742:6: error: no previous prototype for 'usbfs_notify_suspend' drivers/usb/core/devio.c:747:6: error: no previous prototype for 'usbfs_notify_resume' Use the same #ifdef check around the function definitions to avoid the warnings and slightly shrink the USB core. Fixes: 7794f486ed0b ("usbfs: Add ioctls for runtime power management") Signed-off-by: Arnd Bergmann Reviewed-by: Sebastian Reichel Acked-by: Alan Stern Link: https://lore.kernel.org/r/20230516202103.558301-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin