user/sven/linux.git/drivers/vhost, branch v5.3.1

Revert "vhost: block speculation of translated descriptors"

2019-09-14T19:21:51Z

This reverts commit a89db445fbd7f1f8457b03759aa7343fa530ef6b. I was hasty to include this patch, and it breaks the build on 32 bit. Defence in depth is good but let's do it properly. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin

vhost: make sure log_num < in_num

2019-09-11T19:15:26Z

The code assumes log_num < in_num everywhere, and that is true as long as in_num is incremented by descriptor iov count, and log_num by 1. However this breaks if there's a zero sized descriptor. As a result, if a malicious guest creates a vring desc with desc.len = 0, it may cause the host kernel to crash by overflowing the log array. This bug can be triggered during the VM migration. There's no need to log when desc.len = 0, so just don't increment log_num in this case. Fixes: 3a4d5c94e959 ("vhost_net: a kernel-level virtio server") Cc: stable@vger.kernel.org Reviewed-by: Lidong Chen Signed-off-by: ruippan Signed-off-by: yongduan Acked-by: Michael S. Tsirkin Reviewed-by: Tyler Hicks Signed-off-by: Michael S. Tsirkin

vhost: block speculation of translated descriptors

2019-09-11T19:15:07Z

iovec addresses coming from vhost are assumed to be pre-validated, but in fact can be speculated to a value out of range. Userspace address are later validated with array_index_nospec so we can be sure kernel info does not leak through these addresses, but vhost must also not leak userspace info outside the allowed memory table to guests. Following the defence in depth principle, make sure the address is not validated out of node range. Signed-off-by: Michael S. Tsirkin Cc: stable@vger.kernel.org Acked-by: Jason Wang Tested-by: Jason Wang

Revert "vhost: access vq metadata through kernel virtual address"

2019-09-04T11:39:48Z

This reverts commit 7f466032dc ("vhost: access vq metadata through kernel virtual address"). The commit caused a bunch of issues, and while commit 73f628ec9e ("vhost: disable metadata prefetch optimization") disabled the optimization it's not nice to keep lots of dead code around. Signed-off-by: Michael S. Tsirkin

vhost: Remove unnecessary variable

2019-09-04T10:21:17Z

It is unnecessary to use ret variable to return the error code, just return the error code directly. Signed-off-by: Yunsheng Lin Signed-off-by: Michael S. Tsirkin

vhost/test: fix build for vhost test

2019-09-04T10:21:17Z

Since vhost_exceeds_weight() was introduced, callers need to specify the packet weight and byte weight in vhost_dev_init(). Note that, the packet weight isn't counted in this patch to keep the original behavior unchanged. Fixes: e82b9b0727ff ("vhost: introduce vhost_exceeds_weight()") Cc: stable@vger.kernel.org Signed-off-by: Tiwei Bie Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang

vhost/test: fix build for vhost test

2019-09-04T10:21:17Z

Since below commit, callers need to specify the iov_limit in vhost_dev_init() explicitly. Fixes: b46a0bf78ad7 ("vhost: fix OOB in get_rx_bufs()") Cc: stable@vger.kernel.org Signed-off-by: Tiwei Bie Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang

vhost: disable metadata prefetch optimization

2019-07-26T11:49:29Z

This seems to cause guest and host memory corruption. Disable for now until we get a better handle on that. Signed-off-by: Michael S. Tsirkin

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2019-07-17T18:26:09Z

Pull virtio, vhost updates from Michael Tsirkin: "Fixes, features, performance: - new iommu device - vhost guest memory access using vmap (just meta-data for now) - minor fixes" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-mmio: add error check for platform_get_irq scsi: virtio_scsi: Use struct_size() helper iommu/virtio: Add event queue iommu/virtio: Add probe request iommu: Add virtio-iommu driver PCI: OF: Initialize dev->fwnode appropriately of: Allow the iommu-map property to omit untranslated devices dt-bindings: virtio: Add virtio-pci-iommu node dt-bindings: virtio-mmio: Add IOMMU description vhost: fix clang build warning vhost: access vq metadata through kernel virtual address vhost: factor out setting vring addr and num vhost: introduce helpers to get the size of metadata area vhost: rename vq_iotlb_prefetch() to vq_meta_prefetch() vhost: fine grain userspace memory accessors vhost: generalize adding used elem

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2019-07-11T17:55:49Z

Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...