user/sven/linux.git/drivers/vhost, branch v5.4.171

vhost/vsock: fix incorrect used length reported to the guest

2021-12-01T08:23:34Z

commit 49d8c5ffad07ca014cfae72a1b9b8c52b6ad9cb8 upstream. The "used length" reported by calling vhost_add_used() must be the number of bytes written by the device (using "in" buffers). In vhost_vsock_handle_tx_kick() the device only reads the guest buffers (they are all "out" buffers), without writing anything, so we must pass 0 as "used length" to comply virtio spec. Fixes: 433fc58e6bf2 ("VSOCK: Introduce vhost_vsock.ko") Cc: stable@vger.kernel.org Reported-by: Halil Pasic Suggested-by: Jason Wang Signed-off-by: Stefano Garzarella Link: https://lore.kernel.org/r/20211122163525.294024-2-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin Reviewed-by: Stefan Hajnoczi Reviewed-by: Halil Pasic Signed-off-by: Greg Kroah-Hartman

vhost_net: fix OoB on sendmsg() failure.

2021-09-22T10:26:41Z

commit 3c4cea8fa7f71f00c5279547043a84bc2a4d8b8c upstream. If the sendmsg() call in vhost_tx_batch() fails, both the 'batched_xdp' and 'done_idx' indexes are left unchanged. If such failure happens when batched_xdp == VHOST_NET_BATCH, the next call to vhost_net_build_xdp() will access and write memory outside the xdp buffers area. Since sendmsg() can only error with EBADFD, this change addresses the issue explicitly freeing the XDP buffers batch on error. Fixes: 0a0be13b8fe2 ("vhost_net: batch submitting XDP buffers to underlayer sockets") Suggested-by: Jason Wang Signed-off-by: Paolo Abeni Acked-by: Jason Wang Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

vringh: Use wiov->used to check for read/write desc order

2021-09-03T08:08:15Z

[ Upstream commit e74cfa91f42c50f7f649b0eca46aa049754ccdbd ] As __vringh_iov() traverses a descriptor chain, it populates each descriptor entry into either read or write vring iov and increments that iov's ->used member. So, as we iterate over a descriptor chain, at any point, (riov/wriov)->used value gives the number of descriptor enteries available, which are to be read or written by the device. As all read iovs must precede the write iovs, wiov->used should be zero when we are traversing a read descriptor. Current code checks for wiov->i, to figure out whether any previous entry in the current descriptor chain was a write descriptor. However, iov->i is only incremented, when these vring iovs are consumed, at a later point, and remain 0 in __vringh_iov(). So, correct the check for read and write descriptor order, to use wiov->used. Acked-by: Jason Wang Reviewed-by: Stefano Garzarella Signed-off-by: Neeraj Upadhyay Link: https://lore.kernel.org/r/1624591502-4827-1-git-send-email-neeraju@codeaurora.org Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin

vhost: Fix the calculation in vhost_overflow()

2021-08-26T12:36:16Z

[ Upstream commit f7ad318ea0ad58ebe0e595e59aed270bb643b29b ] This fixes the incorrect calculation for integer overflow when the last address of iova range is 0xffffffff. Fixes: ec33d031a14b ("vhost: detect 32 bit integer wrap around") Reported-by: Jason Wang Signed-off-by: Xie Yongji Acked-by: Jason Wang Link: https://lore.kernel.org/r/20210728130756.97-2-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin

vhost: Fix vhost_vq_reset()

2021-04-07T12:47:39Z

[ Upstream commit beb691e69f4dec7bfe8b81b509848acfd1f0dbf9 ] vhost_reset_is_le() is vhost_init_is_le(), and in the case of cross-endian legacy, vhost_init_is_le() depends on vq->user_be. vq->user_be is set by vhost_disable_cross_endian(). But in vhost_vq_reset(), we have: vhost_reset_is_le(vq); vhost_disable_cross_endian(vq); And so user_be is used before being set. To fix that, reverse the lines order as there is no other dependency between them. Signed-off-by: Laurent Vivier Link: https://lore.kernel.org/r/20210312140913.788592-1-lvivier@redhat.com Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin

vhost_net: fix ubuf refcount incorrectly when sendmsg fails

2021-01-12T19:16:16Z

[ Upstream commit 01e31bea7e622f1890c274f4aaaaf8bccd296aa5 ] Currently the vhost_zerocopy_callback() maybe be called to decrease the refcount when sendmsg fails in tun. The error handling in vhost handle_tx_zerocopy() will try to decrease the same refcount again. This is wrong. To fix this issue, we only call vhost_net_ubuf_put() when vq->heads[nvq->desc].len == VHOST_DMA_IN_PROGRESS. Fixes: bab632d69ee4 ("vhost: vhost TX zero-copy support") Signed-off-by: Yunjian Wang Acked-by: Willem de Bruijn Acked-by: Michael S. Tsirkin Acked-by: Jason Wang Link: https://lore.kernel.org/r/1609207308-20544-1-git-send-email-wangyunjian@huawei.com Signed-off-by: Jakub Kicinski Signed-off-by: Greg Kroah-Hartman

vhost scsi: fix cmd completion race

2020-12-02T07:49:48Z

[ Upstream commit 47a3565e8bb14ec48a75b48daf57aa830e2691f8 ] We might not do the final se_cmd put from vhost_scsi_complete_cmd_work. When the last put happens a little later then we could race where vhost_scsi_complete_cmd_work does vhost_signal, the guest runs and sends more IO, and vhost_scsi_handle_vq runs but does not find any free cmds. This patch has us delay completing the cmd until the last lio core ref is dropped. We then know that once we signal to the guest that the cmd is completed that if it queues a new command it will find a free cmd. Signed-off-by: Mike Christie Reviewed-by: Maurizio Lombardi Link: https://lore.kernel.org/r/1604986403-4931-4-git-send-email-michael.christie@oracle.com Signed-off-by: Michael S. Tsirkin Acked-by: Stefan Hajnoczi Signed-off-by: Sasha Levin

vringh: fix __vringh_iov() when riov and wiov are different

2020-11-05T10:43:35Z

commit 5745bcfbbf89b158416075374254d3c013488f21 upstream. If riov and wiov are both defined and they point to different objects, only riov is initialized. If the wiov is not initialized by the caller, the function fails returning -EINVAL and printing "Readable desc 0x... after writable" error message. This issue happens when descriptors have both readable and writable buffers (eg. virtio-blk devices has virtio_blk_outhdr in the readable buffer and status as last byte of writable buffer) and we call __vringh_iov() to get both type of buffers in two different iovecs. Let's replace the 'else if' clause with 'if' to initialize both riov and wiov if they are not NULL. As checkpatch pointed out, we also avoid crashing the kernel when riov and wiov are both NULL, replacing BUG() with WARN_ON() and returning -EINVAL. Fixes: f87d0fbb5798 ("vringh: host-side implementation of virtio rings.") Cc: stable@vger.kernel.org Signed-off-by: Stefano Garzarella Link: https://lore.kernel.org/r/20201008204256.162292-1-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman

vhost: Use vhost_get_used_size() in vhost_vring_set_addr()

2020-10-14T08:32:58Z

commit 71878fa46c7e3b40fa7b3f1b6e4ba3f92f1ac359 upstream. The open-coded computation of the used size doesn't take the event into account when the VIRTIO_RING_F_EVENT_IDX feature is present. Fix that by using vhost_get_used_size(). Fixes: 8ea8cf89e19a ("vhost: support event index") Cc: stable@vger.kernel.org Signed-off-by: Greg Kurz Link: https://lore.kernel.org/r/160171932300.284610.11846106312938909461.stgit@bahia.lan Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman

vhost: Don't call access_ok() when using IOTLB

2020-10-14T08:32:57Z

commit 0210a8db2aeca393fb3067e234967877e3146266 upstream. When the IOTLB device is enabled, the vring addresses we get from userspace are GIOVAs. It is thus wrong to pass them down to access_ok() which only takes HVAs. Access validation is done at prefetch time with IOTLB. Teach vq_access_ok() about that by moving the (vq->iotlb) check from vhost_vq_access_ok() to vq_access_ok(). This prevents vhost_vring_set_addr() to fail when verifying the accesses. No behavior change for vhost_vq_access_ok(). BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1883084 Fixes: 6b1e6cc7855b ("vhost: new device IOTLB API") Cc: jasowang@redhat.com CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Greg Kurz Acked-by: Jason Wang Link: https://lore.kernel.org/r/160171931213.284610.2052489816407219136.stgit@bahia.lan Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman