user/sven/linux.git/drivers/vhost, branch v5.4.76

vringh: fix __vringh_iov() when riov and wiov are different

2020-11-05T10:43:35Z

commit 5745bcfbbf89b158416075374254d3c013488f21 upstream. If riov and wiov are both defined and they point to different objects, only riov is initialized. If the wiov is not initialized by the caller, the function fails returning -EINVAL and printing "Readable desc 0x... after writable" error message. This issue happens when descriptors have both readable and writable buffers (eg. virtio-blk devices has virtio_blk_outhdr in the readable buffer and status as last byte of writable buffer) and we call __vringh_iov() to get both type of buffers in two different iovecs. Let's replace the 'else if' clause with 'if' to initialize both riov and wiov if they are not NULL. As checkpatch pointed out, we also avoid crashing the kernel when riov and wiov are both NULL, replacing BUG() with WARN_ON() and returning -EINVAL. Fixes: f87d0fbb5798 ("vringh: host-side implementation of virtio rings.") Cc: stable@vger.kernel.org Signed-off-by: Stefano Garzarella Link: https://lore.kernel.org/r/20201008204256.162292-1-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman

vhost: Use vhost_get_used_size() in vhost_vring_set_addr()

2020-10-14T08:32:58Z

commit 71878fa46c7e3b40fa7b3f1b6e4ba3f92f1ac359 upstream. The open-coded computation of the used size doesn't take the event into account when the VIRTIO_RING_F_EVENT_IDX feature is present. Fix that by using vhost_get_used_size(). Fixes: 8ea8cf89e19a ("vhost: support event index") Cc: stable@vger.kernel.org Signed-off-by: Greg Kurz Link: https://lore.kernel.org/r/160171932300.284610.11846106312938909461.stgit@bahia.lan Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman

vhost: Don't call access_ok() when using IOTLB

2020-10-14T08:32:57Z

commit 0210a8db2aeca393fb3067e234967877e3146266 upstream. When the IOTLB device is enabled, the vring addresses we get from userspace are GIOVAs. It is thus wrong to pass them down to access_ok() which only takes HVAs. Access validation is done at prefetch time with IOTLB. Teach vq_access_ok() about that by moving the (vq->iotlb) check from vhost_vq_access_ok() to vq_access_ok(). This prevents vhost_vring_set_addr() to fail when verifying the accesses. No behavior change for vhost_vq_access_ok(). BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1883084 Fixes: 6b1e6cc7855b ("vhost: new device IOTLB API") Cc: jasowang@redhat.com CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Greg Kurz Acked-by: Jason Wang Link: https://lore.kernel.org/r/160171931213.284610.2052489816407219136.stgit@bahia.lan Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman

vsock/virtio: add transport parameter to the virtio_transport_reset_no_sock()

2020-10-07T06:01:24Z

[ Upstream commit 4c7246dc45e2706770d5233f7ce1597a07e069ba ] We are going to add 'struct vsock_sock *' parameter to virtio_transport_get_ops(). In some cases, like in the virtio_transport_reset_no_sock(), we don't have any socket assigned to the packet received, so we can't use the virtio_transport_get_ops(). In order to allow virtio_transport_reset_no_sock() to use the '.send_pkt' callback from the 'vhost_transport' or 'virtio_transport', we add the 'struct virtio_transport *' to it and to its caller: virtio_transport_recv_pkt(). We moved the 'vhost_transport' and 'virtio_transport' definition, to pass their address to the virtio_transport_recv_pkt(). Reviewed-by: Stefan Hajnoczi Signed-off-by: Stefano Garzarella Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

vhost/scsi: fix up req type endian-ness

2020-08-05T07:59:42Z

commit 295c1b9852d000580786375304a9800bd9634d15 upstream. vhost/scsi doesn't handle type conversion correctly for request type when using virtio 1.0 and up for BE, or cross-endian platforms. Fix it up using vhost_32_to_cpu. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang Reviewed-by: Stefan Hajnoczi Signed-off-by: Greg Kroah-Hartman

scsi: vhost: Notify TCM about the maximum sg entries supported per command

2020-06-24T15:50:17Z

[ Upstream commit 5ae6a6a915033bfee79e76e0c374d4f927909edc ] vhost-scsi pre-allocates the maximum sg entries per command and if a command requires more than VHOST_SCSI_PREALLOC_SGLS entries, then that command is failed by it. This patch lets vhost communicate the max sg limit when it registers vhost_scsi_ops with TCM. With this change, TCM would report the max sg entries through "Block Limits" VPD page which will be typically queried by the SCSI initiator during device discovery. By knowing this limit, the initiator could ensure the maximum transfer length is less than or equal to what is reported by vhost-scsi. Link: https://lore.kernel.org/r/1590166317-953-1-git-send-email-sudhakar.panneerselvam@oracle.com Cc: Michael S. Tsirkin Cc: Jason Wang Cc: Paolo Bonzini Cc: Stefan Hajnoczi Reviewed-by: Mike Christie Signed-off-by: Sudhakar Panneerselvam Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

vhost/vsock: fix packet delivery order to monitoring devices

2020-05-27T15:46:31Z

[ Upstream commit 107bc0766b9feb5113074c753735a3f115c2141f ] We want to deliver packets to monitoring devices before it is put in the virtqueue, to avoid that replies can appear in the packet capture before the transmitted packet. Signed-off-by: Stefano Garzarella Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

vhost: vsock: kick send_pkt worker once device is started

2020-05-10T08:31:21Z

commit 0b841030625cde5f784dd62aec72d6a766faae70 upstream. Ning Bo reported an abnormal 2-second gap when booting Kata container [1]. The unconditional timeout was caused by VSOCK_DEFAULT_CONNECT_TIMEOUT of connecting from the client side. The vhost vsock client tries to connect an initializing virtio vsock server. The abnormal flow looks like: host-userspace vhost vsock guest vsock ============== =========== ============ connect() --------> vhost_transport_send_pkt_work() initializing | vq->private_data==NULL | will not be queued V schedule_timeout(2s) vhost_vsock_start() <--------- device ready set vq->private_data wait for 2s and failed connect() again vq->private_data!=NULL recv connecting pkt Details: 1. Host userspace sends a connect pkt, at that time, guest vsock is under initializing, hence the vhost_vsock_start has not been called. So vq->private_data==NULL, and the pkt is not been queued to send to guest 2. Then it sleeps for 2s 3. After guest vsock finishes initializing, vq->private_data is set 4. When host userspace wakes up after 2s, send connecting pkt again, everything is fine. As suggested by Stefano Garzarella, this fixes it by additional kicking the send_pkt worker in vhost_vsock_start once the virtio device is started. This makes the pending pkt sent again. After this patch, kata-runtime (with vsock enabled) boot time is reduced from 3s to 1s on a ThunderX2 arm64 server. [1] https://github.com/kata-containers/runtime/issues/1917 Reported-by: Ning Bo Suggested-by: Stefano Garzarella Signed-off-by: Jia He Link: https://lore.kernel.org/r/20200501043840.186557-1-justin.he@arm.com Signed-off-by: Michael S. Tsirkin Reviewed-by: Stefano Garzarella Signed-off-by: Greg Kroah-Hartman

vhost: Check docket sk_family instead of call getname

2020-03-05T15:43:44Z

commit 42d84c8490f9f0931786f1623191fcab397c3d64 upstream. Doing so, we save one call to get data we already have in the struct. Also, since there is no guarantee that getname use sockaddr_ll parameter beyond its size, we add a little bit of security here. It should do not do beyond MAX_ADDR_LEN, but syzbot found that ax25_getname writes more (72 bytes, the size of full_sockaddr_ax25, versus 20 + 32 bytes of sockaddr_ll + MAX_ADDR_LEN in syzbot repro). Fixes: 3a4d5c94e9593 ("vhost_net: a kernel-level virtio server") Reported-by: syzbot+f2a62d07a5198c819c7b@syzkaller.appspotmail.com Signed-off-by: Eugenio Pérez Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

vhost/vsock: accept only packets with the right dst_cid

2020-01-04T18:19:18Z

[ Upstream commit 8a3cc29c316c17de590e3ff8b59f3d6cbfd37b0a ] When we receive a new packet from the guest, we check if the src_cid is correct, but we forgot to check the dst_cid. The host should accept only packets where dst_cid is equal to the host CID. Signed-off-by: Stefano Garzarella Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman