user/sven/linux.git/drivers/vhost, branch v5.5.1

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2019-12-08T21:28:11Z

Pull networking fixes from David Miller: 1) More jumbo frame fixes in r8169, from Heiner Kallweit. 2) Fix bpf build in minimal configuration, from Alexei Starovoitov. 3) Use after free in slcan driver, from Jouni Hogander. 4) Flower classifier port ranges don't work properly in the HW offload case, from Yoshiki Komachi. 5) Use after free in hns3_nic_maybe_stop_tx(), from Yunsheng Lin. 6) Out of bounds access in mqprio_dump(), from Vladyslav Tarasiuk. 7) Fix flow dissection in dsa TX path, from Alexander Lobakin. 8) Stale syncookie timestampe fixes from Guillaume Nault. [ Did an evil merge to silence a warning introduced by this pull - Linus ] * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) r8169: fix rtl_hw_jumbo_disable for RTL8168evl net_sched: validate TCA_KIND attribute in tc_chain_tmplt_add() r8169: add missing RX enabling for WoL on RTL8125 vhost/vsock: accept only packets with the right dst_cid net: phy: dp83867: fix hfs boot in rgmii mode net: ethernet: ti: cpsw: fix extra rx interrupt inet: protect against too small mtu values. gre: refetch erspan header from skb->data after pskb_may_pull() pppoe: remove redundant BUG_ON() check in pppoe_pernet tcp: Protect accesses to .ts_recent_stamp with {READ,WRITE}_ONCE() tcp: tighten acceptance of ACKs not matching a child socket tcp: fix rejected syncookies due to stale timestamps lpc_eth: kernel BUG on remove tcp: md5: fix potential overestimation of TCP option space net: sched: allow indirect blocks to bind to clsact in TC net: core: rename indirect block ingress cb function net-sysfs: Call dev_hold always in netdev_queue_add_kobject net: dsa: fix flow dissection on Tx path net/tls: Fix return values to avoid ENOTSUPP net: avoid an indirect call in ____sys_recvmsg() ...

vhost/vsock: accept only packets with the right dst_cid

2019-12-07T19:59:51Z

When we receive a new packet from the guest, we check if the src_cid is correct, but we forgot to check the dst_cid. The host should accept only packets where dst_cid is equal to the host CID. Signed-off-by: Stefano Garzarella Signed-off-by: David S. Miller

vhost, kcov: collect coverage from vhost_worker

2019-12-05T03:44:14Z

Add kcov_remote_start()/kcov_remote_stop() annotations to the vhost_worker() function, which is responsible for processing vhost works. Since vhost_worker() threads are spawned per vhost device instance the common kcov handle is used for kcov_remote_start()/stop() annotations (see Documentation/dev-tools/kcov.rst for details). As the result kcov can now be used to collect coverage from vhost worker threads. Link: http://lkml.kernel.org/r/e49d5d154e5da6c9ada521d2b7ce10a49ce9f98b.1572366574.git.andreyknvl@google.com Signed-off-by: Andrey Konovalov Cc: Alan Stern Cc: Alexander Potapenko Cc: Anders Roxell Cc: Arnd Bergmann Cc: David Windsor Cc: Dmitry Vyukov Cc: Elena Reshetova Cc: Greg Kroah-Hartman Cc: Jason Wang Cc: Marco Elver Cc: "Michael S. Tsirkin" Cc: Steven Rostedt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground

2019-12-01T21:46:15Z

Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...

vhost/vsock: refuse CID assigned to the guest->host transport

2019-11-15T02:12:18Z

In a nested VM environment, we have to refuse to assign to a nested guest the same CID assigned to our guest->host transport. In this way, the user can use the local CID for loopback. Signed-off-by: Stefano Garzarella Signed-off-by: David S. Miller

vsock: prevent transport modules unloading

2019-11-15T02:12:18Z

This patch adds 'module' member in the 'struct vsock_transport' in order to get/put the transport module. This prevents the module unloading while sockets are assigned to it. We increase the module refcnt when a socket is assigned to a transport, and we decrease the module refcnt when the socket is destructed. Reviewed-by: Stefan Hajnoczi Reviewed-by: Jorgen Hansen Signed-off-by: Stefano Garzarella Signed-off-by: David S. Miller

vsock: add multi-transports support

2019-11-15T02:12:18Z

This patch adds the support of multiple transports in the VSOCK core. With the multi-transports support, we can use vsock with nested VMs (using also different hypervisors) loading both guest->host and host->guest transports at the same time. Major changes: - vsock core module can be loaded regardless of the transports - vsock_core_init() and vsock_core_exit() are renamed to vsock_core_register() and vsock_core_unregister() - vsock_core_register() has a feature parameter (H2G, G2H, DGRAM) to identify which directions the transport can handle and if it's support DGRAM (only vmci) - each stream socket is assigned to a transport when the remote CID is set (during the connect() or when we receive a connection request on a listener socket). The remote CID is used to decide which transport to use: - remote CID <= VMADDR_CID_HOST will use guest->host transport; - remote CID == local_cid (guest->host transport) will use guest->host transport for loopback (host->guest transports don't support loopback); - remote CID > VMADDR_CID_HOST will use host->guest transport; - listener sockets are not bound to any transports since no transport operations are done on it. In this way we can create a listener socket, also if the transports are not loaded or with VMADDR_CID_ANY to listen on all transports. - DGRAM sockets are handled as before, since only the vmci_transport provides this feature. Signed-off-by: Stefano Garzarella Signed-off-by: David S. Miller

vsock: handle buffer_size sockopts in the core

2019-11-15T02:12:18Z

virtio_transport and vmci_transport handle the buffer_size sockopts in a very similar way. In order to support multiple transports, this patch moves this handling in the core to allow the user to change the options also if the socket is not yet assigned to any transport. This patch also adds the '.notify_buffer_size' callback in the 'struct virtio_transport' in order to inform the transport, when the buffer_size is changed by the user. It is also useful to limit the 'buffer_size' requested (e.g. virtio transports). Acked-by: Dexuan Cui Reviewed-by: Stefan Hajnoczi Reviewed-by: Jorgen Hansen Signed-off-by: Stefano Garzarella Signed-off-by: David S. Miller

vsock/virtio: add transport parameter to the virtio_transport_reset_no_sock()

2019-11-15T02:12:18Z

We are going to add 'struct vsock_sock *' parameter to virtio_transport_get_ops(). In some cases, like in the virtio_transport_reset_no_sock(), we don't have any socket assigned to the packet received, so we can't use the virtio_transport_get_ops(). In order to allow virtio_transport_reset_no_sock() to use the '.send_pkt' callback from the 'vhost_transport' or 'virtio_transport', we add the 'struct virtio_transport *' to it and to its caller: virtio_transport_recv_pkt(). We moved the 'vhost_transport' and 'virtio_transport' definition, to pass their address to the virtio_transport_recv_pkt(). Reviewed-by: Stefan Hajnoczi Signed-off-by: Stefano Garzarella Signed-off-by: David S. Miller

vringh: fix copy direction of vringh_iov_push_kern()

2019-10-28T08:25:04Z

We want to copy from iov to buf, so the direction was wrong. Note: no real user for the helper, but it will be used by future features. Signed-off-by: Jason Wang Signed-off-by: Michael S. Tsirkin