user/sven/linux.git/drivers/vhost, branch v5.7.17

vhost/scsi: fix up req type endian-ness

2020-08-05T07:58:36Z

commit 295c1b9852d000580786375304a9800bd9634d15 upstream. vhost/scsi doesn't handle type conversion correctly for request type when using virtio 1.0 and up for BE, or cross-endian platforms. Fix it up using vhost_32_to_cpu. Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang Reviewed-by: Stefan Hajnoczi Signed-off-by: Greg Kroah-Hartman

scsi: vhost: Notify TCM about the maximum sg entries supported per command

2020-06-24T15:48:27Z

[ Upstream commit 5ae6a6a915033bfee79e76e0c374d4f927909edc ] vhost-scsi pre-allocates the maximum sg entries per command and if a command requires more than VHOST_SCSI_PREALLOC_SGLS entries, then that command is failed by it. This patch lets vhost communicate the max sg limit when it registers vhost_scsi_ops with TCM. With this change, TCM would report the max sg entries through "Block Limits" VPD page which will be typically queried by the SCSI initiator during device discovery. By knowing this limit, the initiator could ensure the maximum transfer length is less than or equal to what is reported by vhost-scsi. Link: https://lore.kernel.org/r/1590166317-953-1-git-send-email-sudhakar.panneerselvam@oracle.com Cc: Michael S. Tsirkin Cc: Jason Wang Cc: Paolo Bonzini Cc: Stefan Hajnoczi Reviewed-by: Mike Christie Signed-off-by: Sudhakar Panneerselvam Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2020-05-21T19:59:29Z

Pull virtio fixes from Michael Tsirkin: "Fix a couple of build warnings" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: missing __user tags vdpasim: remove unused variable 'ret'

vhost: missing __user tags

2020-05-15T15:36:31Z

sparse warns about converting void * to void __user *. This is not new but only got noticed now that vhost is built on more systems. This is just a question of __user tags missing in a couple of places, so fix it up. Fixes: f88949138058 ("vhost: introduce O(1) vq metadata cache") Reported-by: kbuild test robot Signed-off-by: Michael S. Tsirkin

Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

2020-05-07T03:53:22Z

Pull networking fixes from David Miller: 1) Fix reference count leaks in various parts of batman-adv, from Xiyu Yang. 2) Update NAT checksum even when it is zero, from Guillaume Nault. 3) sk_psock reference count leak in tls code, also from Xiyu Yang. 4) Sanity check TCA_FQ_CODEL_DROP_BATCH_SIZE netlink attribute in fq_codel, from Eric Dumazet. 5) Fix panic in choke_reset(), also from Eric Dumazet. 6) Fix VLAN accel handling in bnxt_fix_features(), from Michael Chan. 7) Disallow out of range quantum values in sch_sfq, from Eric Dumazet. 8) Fix crash in x25_disconnect(), from Yue Haibing. 9) Don't pass pointer to local variable back to the caller in nf_osf_hdr_ctx_init(), from Arnd Bergmann. 10) Wireguard should use the ECN decap helper functions, from Toke Høiland-Jørgensen. 11) Fix command entry leak in mlx5 driver, from Moshe Shemesh. 12) Fix uninitialized variable access in mptcp's subflow_syn_recv_sock(), from Paolo Abeni. 13) Fix unnecessary out-of-order ingress frame ordering in macsec, from Scott Dial. 14) IPv6 needs to use a global serial number for dst validation just like ipv4, from David Ahern. 15) Fix up PTP_1588_CLOCK deps, from Clay McClure. 16) Missing NLM_F_MULTI flag in gtp driver netlink messages, from Yoshiyuki Kurauchi. 17) Fix a regression in that dsa user port errors should not be fatal, from Florian Fainelli. 18) Fix iomap leak in enetc driver, from Dejin Zheng. 19) Fix use after free in lec_arp_clear_vccs(), from Cong Wang. 20) Initialize protocol value earlier in neigh code paths when generating events, from Roman Mashak. 21) netdev_update_features() must be called with RTNL mutex in macsec driver, from Antoine Tenart. 22) Validate untrusted GSO packets even more strictly, from Willem de Bruijn. 23) Wireguard decrypt worker needs a cond_resched(), from Jason Donenfeld. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits) net: flow_offload: skip hw stats check for FLOW_ACTION_HW_STATS_DONT_CARE MAINTAINERS: put DYNAMIC INTERRUPT MODERATION in proper order wireguard: send/receive: use explicit unlikely branch instead of implicit coalescing wireguard: selftests: initalize ipv6 members to NULL to squelch clang warning wireguard: send/receive: cond_resched() when processing worker ringbuffers wireguard: socket: remove errant restriction on looping to self wireguard: selftests: use normal kernel stack size on ppc64 net: ethernet: ti: am65-cpsw-nuss: fix irqs type ionic: Use debugfs_create_bool() to export bool net: dsa: Do not leave DSA master with NULL netdev_ops net: dsa: remove duplicate assignment in dsa_slave_add_cls_matchall_mirred net: stricter validation of untrusted gso packets seg6: fix SRH processing to comply with RFC8754 net: mscc: ocelot: ANA_AUTOAGE_AGE_PERIOD holds a value in seconds, not ms net: dsa: ocelot: the MAC table on Felix is twice as large net: dsa: sja1105: the PTP_CLK extts input reacts on both edges selftests: net: tcp_mmap: fix SO_RCVLOWAT setting net: hsr: fix incorrect type usage for protocol variable net: macsec: fix rtnl locking issue net: mvpp2: cls: Prevent buffer overflow in mvpp2_ethtool_cls_rule_del() ...

vhost: vsock: kick send_pkt worker once device is started

2020-05-02T14:28:21Z

Ning Bo reported an abnormal 2-second gap when booting Kata container [1]. The unconditional timeout was caused by VSOCK_DEFAULT_CONNECT_TIMEOUT of connecting from the client side. The vhost vsock client tries to connect an initializing virtio vsock server. The abnormal flow looks like: host-userspace vhost vsock guest vsock ============== =========== ============ connect() --------> vhost_transport_send_pkt_work() initializing | vq->private_data==NULL | will not be queued V schedule_timeout(2s) vhost_vsock_start() <--------- device ready set vq->private_data wait for 2s and failed connect() again vq->private_data!=NULL recv connecting pkt Details: 1. Host userspace sends a connect pkt, at that time, guest vsock is under initializing, hence the vhost_vsock_start has not been called. So vq->private_data==NULL, and the pkt is not been queued to send to guest 2. Then it sleeps for 2s 3. After guest vsock finishes initializing, vq->private_data is set 4. When host userspace wakes up after 2s, send connecting pkt again, everything is fine. As suggested by Stefano Garzarella, this fixes it by additional kicking the send_pkt worker in vhost_vsock_start once the virtio device is started. This makes the pending pkt sent again. After this patch, kata-runtime (with vsock enabled) boot time is reduced from 3s to 1s on a ThunderX2 arm64 server. [1] https://github.com/kata-containers/runtime/issues/1917 Reported-by: Ning Bo Suggested-by: Stefano Garzarella Signed-off-by: Jia He Link: https://lore.kernel.org/r/20200501043840.186557-1-justin.he@arm.com Signed-off-by: Michael S. Tsirkin Reviewed-by: Stefano Garzarella

vsock/virtio: fix multiple packet delivery to monitoring devices

2020-04-27T17:18:01Z

In virtio_transport.c, if the virtqueue is full, the transmitting packet is queued up and it will be sent in the next iteration. This causes the same packet to be delivered multiple times to monitoring devices. We want to continue to deliver packets to monitoring devices before it is put in the virtqueue, to avoid that replies can appear in the packet capture before the transmitted packet. This patch fixes the issue, adding a new flag (tap_delivered) in struct virtio_vsock_pkt, to check if the packet is already delivered to monitoring devices. In vhost/vsock.c, we are splitting packets, so we must set 'tap_delivered' to false when we queue up the same virtio_vsock_pkt to handle the remaining bytes. Signed-off-by: Stefano Garzarella Signed-off-by: David S. Miller

vhost/vsock: fix packet delivery order to monitoring devices

2020-04-27T17:18:01Z

We want to deliver packets to monitoring devices before it is put in the virtqueue, to avoid that replies can appear in the packet capture before the transmitted packet. Signed-off-by: Stefano Garzarella Signed-off-by: David S. Miller

vhost: disable for OABI

2020-04-20T14:19:22Z

vhost is currently broken on the some ARM configs. The reason is that the ring element addresses are passed between components with different alignments assumptions. Thus, if guest selects a pointer and host then gets and dereferences it, then alignment assumed by the host's compiler might be greater than the actual alignment of the pointer. compiler on the host from assuming pointer is aligned. This actually triggers on ARM with -mabi=apcs-gnu - which is a deprecated configuration. With this OABI, compiler assumes that all structures are 4 byte aligned - which is stronger than virtio guarantees for available and used rings, which are merely 2 bytes. Thus a guest without -mabi=apcs-gnu running on top of host with -mabi=apcs-gnu will be broken. The correct fix is to force alignment of structures - however that is an intrusive fix that's best deferred until the next release. We didn't previously support such ancient systems at all - this surfaced after vdpa support prompted removing dependency of vhost on VIRTULIZATION. So for now, let's just add something along the lines of depends on !ARM || AEABI to the virtio Kconfig declaration, and add a comment that it has to do with struct member alignment. Note: we can't make VHOST and VHOST_RING themselves have a dependency since these are selected. Add a new symbol for that. We should be able to drop this dependency down the road. Fixes: 20c384f1ea1a0bc7 ("vhost: refine vhost and vringh kconfig") Suggested-by: Ard Biesheuvel Suggested-by: Richard Earnshaw Signed-off-by: Michael S. Tsirkin

vdpa: make vhost, virtio depend on menu

2020-04-17T10:05:30Z

If user did not configure any vdpa drivers, neither vhost nor virtio vdpa are going to be useful. So there's no point in prompting for these and selecting vdpa core automatically. Simplify configuration by making virtio and vhost vdpa drivers depend on vdpa menu entry. Once done, we no longer need a separate menu entry, so also get rid of this. While at it, fix up the IFC entry: VDPA->vDPA for consistency with other places. Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang