user/sven/linux.git/drivers/vhost, branch v6.6.92

vhost-scsi: Fix handling of multiple calls to vhost_scsi_set_endpoint

2025-04-10T12:37:32Z

[ Upstream commit 5dd639a1646ef5fe8f4bf270fad47c5c3755b9b6 ] If vhost_scsi_set_endpoint is called multiple times without a vhost_scsi_clear_endpoint between them, we can hit multiple bugs found by Haoran Zhang: 1. Use-after-free when no tpgs are found: This fixes a use after free that occurs when vhost_scsi_set_endpoint is called more than once and calls after the first call do not find any tpgs to add to the vs_tpg. When vhost_scsi_set_endpoint first finds tpgs to add to the vs_tpg array match=true, so we will do: vhost_vq_set_backend(vq, vs_tpg); ... kfree(vs->vs_tpg); vs->vs_tpg = vs_tpg; If vhost_scsi_set_endpoint is called again and no tpgs are found match=false so we skip the vhost_vq_set_backend call leaving the pointer to the vs_tpg we then free via: kfree(vs->vs_tpg); vs->vs_tpg = vs_tpg; If a scsi request is then sent we do: vhost_scsi_handle_vq -> vhost_scsi_get_req -> vhost_vq_get_backend which sees the vs_tpg we just did a kfree on. 2. Tpg dir removal hang: This patch fixes an issue where we cannot remove a LIO/target layer tpg (and structs above it like the target) dir due to the refcount dropping to -1. The problem is that if vhost_scsi_set_endpoint detects a tpg is already in the vs->vs_tpg array or if the tpg has been removed so target_depend_item fails, the undepend goto handler will do target_undepend_item on all tpgs in the vs_tpg array dropping their refcount to 0. At this time vs_tpg contains both the tpgs we have added in the current vhost_scsi_set_endpoint call as well as tpgs we added in previous calls which are also in vs->vs_tpg. Later, when vhost_scsi_clear_endpoint runs it will do target_undepend_item on all the tpgs in the vs->vs_tpg which will drop their refcount to -1. Userspace will then not be able to remove the tpg and will hang when it tries to do rmdir on the tpg dir. 3. Tpg leak: This fixes a bug where we can leak tpgs and cause them to be un-removable because the target name is overwritten when vhost_scsi_set_endpoint is called multiple times but with different target names. The bug occurs if a user has called VHOST_SCSI_SET_ENDPOINT and setup a vhost-scsi device to target/tpg mapping, then calls VHOST_SCSI_SET_ENDPOINT again with a new target name that has tpgs we haven't seen before (target1 has tpg1 but target2 has tpg2). When this happens we don't teardown the old target tpg mapping and just overwrite the target name and the vs->vs_tpg array. Later when we do vhost_scsi_clear_endpoint, we are passed in either target1 or target2's name and we will only match that target's tpgs when we loop over the vs->vs_tpg. We will then return from the function without doing target_undepend_item on the tpgs. Because of all these bugs, it looks like being able to call vhost_scsi_set_endpoint multiple times was never supported. The major user, QEMU, already has checks to prevent this use case. So to fix the issues, this patch prevents vhost_scsi_set_endpoint from being called if it's already successfully added tpgs. To add, remove or change the tpg config or target name, you must do a vhost_scsi_clear_endpoint first. Fixes: 25b98b64e284 ("vhost scsi: alloc cmds per vq instead of session") Fixes: 4f7f46d32c98 ("tcm_vhost: Use vq->private_data to indicate if the endpoint is setup") Reported-by: Haoran Zhang Closes: https://lore.kernel.org/virtualization/e418a5ee-45ca-4d18-9b5d-6f8b6b1add8e@oracle.com/T/#me6c0041ce376677419b9b2563494172a01487ecb Signed-off-by: Mike Christie Reviewed-by: Stefan Hajnoczi Message-Id: <20250129210922.121533-1-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin Acked-by: Stefano Garzarella Signed-off-by: Sasha Levin

vhost/scsi: null-ptr-dereference in vhost_scsi_get_req()

2024-10-10T09:58:08Z

commit 221af82f606d928ccef19a16d35633c63026f1be upstream. Since commit 3f8ca2e115e5 ("vhost/scsi: Extract common handling code from control queue handler") a null pointer dereference bug can be triggered when guest sends an SCSI AN request. In vhost_scsi_ctl_handle_vq(), `vc.target` is assigned with `&v_req.tmf.lun[1]` within a switch-case block and is then passed to vhost_scsi_get_req() which extracts `vc->req` and `tpg`. However, for a `VIRTIO_SCSI_T_AN_*` request, tpg is not required, so `vc.target` is set to NULL in this branch. Later, in vhost_scsi_get_req(), `vc->target` is dereferenced without being checked, leading to a null pointer dereference bug. This bug can be triggered from guest. When this bug occurs, the vhost_worker process is killed while holding `vq->mutex` and the corresponding tpg will remain occupied indefinitely. Below is the KASAN report: Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 1 PID: 840 Comm: poc Not tainted 6.10.0+ #1 Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014 RIP: 0010:vhost_scsi_get_req+0x165/0x3a0 Code: 00 fc ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 2b 02 00 00 48 b8 00 00 00 00 00 fc ff df 4d 8b 65 30 4c 89 e2 48 c1 ea 03 <0f> b6 04 02 4c 89 e2 83 e2 07 38 d0 7f 08 84 c0 0f 85 be 01 00 00 RSP: 0018:ffff888017affb50 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff88801b000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888017affcb8 RBP: ffff888017affb80 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff888017affc88 R14: ffff888017affd1c R15: ffff888017993000 FS: 000055556e076500(0000) GS:ffff88806b100000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200027c0 CR3: 0000000010ed0004 CR4: 0000000000370ef0 Call Trace: ? show_regs+0x86/0xa0 ? die_addr+0x4b/0xd0 ? exc_general_protection+0x163/0x260 ? asm_exc_general_protection+0x27/0x30 ? vhost_scsi_get_req+0x165/0x3a0 vhost_scsi_ctl_handle_vq+0x2a4/0xca0 ? __pfx_vhost_scsi_ctl_handle_vq+0x10/0x10 ? __switch_to+0x721/0xeb0 ? __schedule+0xda5/0x5710 ? __kasan_check_write+0x14/0x30 ? _raw_spin_lock+0x82/0xf0 vhost_scsi_ctl_handle_kick+0x52/0x90 vhost_run_work_list+0x134/0x1b0 vhost_task_fn+0x121/0x350 ... ---[ end trace 0000000000000000 ]--- Let's add a check in vhost_scsi_get_req. Fixes: 3f8ca2e115e5 ("vhost/scsi: Extract common handling code from control queue handler") Signed-off-by: Haoran Zhang [whitespace fixes] Signed-off-by: Mike Christie Message-Id: Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman

vhost_vdpa: assign irq bypass producer token correctly

2024-10-04T14:29:40Z

[ Upstream commit 02e9e9366fefe461719da5d173385b6685f70319 ] We used to call irq_bypass_unregister_producer() in vhost_vdpa_setup_vq_irq() which is problematic as we don't know if the token pointer is still valid or not. Actually, we use the eventfd_ctx as the token so the life cycle of the token should be bound to the VHOST_SET_VRING_CALL instead of vhost_vdpa_setup_vq_irq() which could be called by set_status(). Fixing this by setting up irq bypass producer's token when handling VHOST_SET_VRING_CALL and un-registering the producer before calling vhost_vring_ioctl() to prevent a possible use after free as eventfd could have been released in vhost_vring_ioctl(). And such registering and unregistering will only be done if DRIVER_OK is set. Reported-by: Dragos Tatulea Tested-by: Dragos Tatulea Reviewed-by: Dragos Tatulea Fixes: 2cf1ba9a4d15 ("vhost_vdpa: implement IRQ offloading in vhost_vdpa") Signed-off-by: Jason Wang Message-Id: <20240816031900.18013-1-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin

vhost-vdpa: switch to use vmf_insert_pfn() in the fault handler

2024-08-14T11:58:55Z

commit 0823dc64586ba5ea13a7d200a5d33e4c5fa45950 upstream. remap_pfn_page() should not be called in the fault handler as it may change the vma->flags which may trigger lockdep warning since the vma write lock is not held. Actually there's no need to modify the vma->flags as it has been set in the mmap(). So this patch switches to use vmf_insert_pfn() instead. Reported-by: Dragos Tatulea Tested-by: Dragos Tatulea Fixes: ddd89d0a059d ("vhost_vdpa: support doorbell mapping via mmap") Cc: stable@vger.kernel.org Signed-off-by: Jason Wang Message-Id: <20240701033159.18133-1-jasowang@redhat.com> Signed-off-by: Michael S. Tsirkin Reviewed-by: Michal Kubiak Signed-off-by: Greg Kroah-Hartman

vhost/vsock: always initialize seqpacket_allow

2024-08-03T06:54:01Z

[ Upstream commit 1e1fdcbdde3b7663e5d8faeb2245b9b151417d22 ] There are two issues around seqpacket_allow: 1. seqpacket_allow is not initialized when socket is created. Thus if features are never set, it will be read uninitialized. 2. if VIRTIO_VSOCK_F_SEQPACKET is set and then cleared, then seqpacket_allow will not be cleared appropriately (existing apps I know about don't usually do this but it's legal and there's no way to be sure no one relies on this). To fix: - initialize seqpacket_allow after allocation - set it unconditionally in set_features Reported-by: syzbot+6c21aeb59d0e82eb2782@syzkaller.appspotmail.com Reported-by: Jeongjun Park Fixes: ced7b713711f ("vhost/vsock: support SEQPACKET for transport"). Tested-by: Arseny Krasnov Cc: David S. Miller Cc: Stefan Hajnoczi Message-ID: <20240422100010-mutt-send-email-mst@kernel.org> Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang Reviewed-by: Stefano Garzarella Reviewed-by: Eugenio Pérez Acked-by: Jakub Kicinski Signed-off-by: Sasha Levin

vhost-scsi: Handle vhost_vq_work_queue failures for events

2024-07-11T10:49:20Z

[ Upstream commit b1b2ce58ed23c5d56e0ab299a5271ac01f95b75c ] Currently, we can try to queue an event's work before the vhost_task is created. When this happens we just drop it in vhost_scsi_do_plug before even calling vhost_vq_work_queue. During a device shutdown we do the same thing after vhost_scsi_clear_endpoint has cleared the backends. In the next patches we will be able to kill the vhost_task before we have cleared the endpoint. In that case, vhost_vq_work_queue can fail and we will leak the event's memory. This has handle the failure by just freeing the event. This is safe to do, because vhost_vq_work_queue will only return failure for us when the vhost_task is killed and so userspace will not be able to handle events if we sent them. Signed-off-by: Mike Christie Message-Id: <20240316004707.45557-2-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin

vhost_task: Handle SIGKILL by flushing work and exiting

2024-07-11T10:49:10Z

[ Upstream commit db5247d9bf5c6ade9fd70b4e4897441e0269b233 ] Instead of lingering until the device is closed, this has us handle SIGKILL by: 1. marking the worker as killed so we no longer try to use it with new virtqueues and new flush operations. 2. setting the virtqueue to worker mapping so no new works are queued. 3. running all the exiting works. Suggested-by: Edward Adam Davis Reported-and-tested-by: syzbot+98edc2df894917b3431f@syzkaller.appspotmail.com Message-Id: Signed-off-by: Mike Christie Message-Id: <20240316004707.45557-9-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin

vhost: Release worker mutex during flushes

2024-07-11T10:49:10Z

[ Upstream commit ba704ff4e142fd3cfaf3379dd3b3b946754e06e3 ] In the next patches where the worker can be killed while in use, we need to be able to take the worker mutex and kill queued works for new IO and flushes, and set some new flags to prevent new __vhost_vq_attach_worker calls from swapping in/out killed workers. If we are holding the worker mutex during a flush and the flush's work is still in the queue, the worker code that will handle the SIGKILL cleanup won't be able to take the mutex and perform it's cleanup. So this patch has us drop the worker mutex while waiting for the flush to complete. Signed-off-by: Mike Christie Message-Id: <20240316004707.45557-8-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin

vhost: Use virtqueue mutex for swapping worker

2024-07-11T10:49:10Z

[ Upstream commit 34cf9ba5f00a222dddd9fc71de7c68fdaac7fb97 ] __vhost_vq_attach_worker uses the vhost_dev mutex to serialize the swapping of a virtqueue's worker. This was done for simplicity because we are already holding that mutex. In the next patches where the worker can be killed while in use, we need finer grained locking because some drivers will hold the vhost_dev mutex while flushing. However in the SIGKILL handler in the next patches, we will need to be able to swap workers (set current one to NULL), kill queued works and stop new flushes while flushes are in progress. To prepare us, this has us use the virtqueue mutex for swapping workers instead of the vhost_dev one. Signed-off-by: Mike Christie Message-Id: <20240316004707.45557-7-michael.christie@oracle.com> Signed-off-by: Michael S. Tsirkin Signed-off-by: Sasha Levin

vhost: Add smp_rmb() in vhost_enable_notify()

2024-04-17T09:19:35Z

commit df9ace7647d4123209395bb9967e998d5758c645 upstream. A smp_rmb() has been missed in vhost_enable_notify(), inspired by Will. Otherwise, it's not ensured the available ring entries pushed by guest can be observed by vhost in time, leading to stale available ring entries fetched by vhost in vhost_get_vq_desc(), as reported by Yihuang Yu on NVidia's grace-hopper (ARM64) platform. /home/gavin/sandbox/qemu.main/build/qemu-system-aarch64 \ -accel kvm -machine virt,gic-version=host -cpu host \ -smp maxcpus=1,cpus=1,sockets=1,clusters=1,cores=1,threads=1 \ -m 4096M,slots=16,maxmem=64G \ -object memory-backend-ram,id=mem0,size=4096M \ : \ -netdev tap,id=vnet0,vhost=true \ -device virtio-net-pci,bus=pcie.8,netdev=vnet0,mac=52:54:00:f1:26:b0 : guest# netperf -H 10.26.1.81 -l 60 -C -c -t UDP_STREAM virtio_net virtio0: output.0:id 100 is not a head! Add the missed smp_rmb() in vhost_enable_notify(). When it returns true, it means there's still pending tx buffers. Since it might read indices, so it still can bypass the smp_rmb() in vhost_get_vq_desc(). Note that it should be safe until vq->avail_idx is changed by commit d3bb267bbdcb ("vhost: cache avail index in vhost_enable_notify()"). Fixes: d3bb267bbdcb ("vhost: cache avail index in vhost_enable_notify()") Cc: # v5.18+ Reported-by: Yihuang Yu Suggested-by: Will Deacon Signed-off-by: Gavin Shan Acked-by: Jason Wang Message-Id: <20240328002149.1141302-3-gshan@redhat.com> Signed-off-by: Michael S. Tsirkin Reviewed-by: Stefano Garzarella Signed-off-by: Greg Kroah-Hartman