user/sven/linux.git/drivers/video/fbdev, branch v4.4.3

OMAPDSS: fix timings for VENC to match what omapdrm expects

2015-12-09T10:57:13Z

Otherwise check_timings fails and we get a "has no modes" message from xrandr. This fix makes the venc assume PAL and NTSC timings that match the timings synthetized by copy_timings_drm_to_omap() from omapdrm mode settings so that check_timings() succeeds. Tested on: BeagleBoard XM, GTA04 and OpenPandora Signed-off-by: H. Nikolaus Schaller Signed-off-by: Tomi Valkeinen

video: fbdev: fsl: Fix kernel crash when diu_ops is not implemented

2015-12-09T10:57:06Z

If diu_ops is not implemented on platform, kernel will access a NULL pointer. We need to check this pointer in DIU initialization. Signed-off-by: Wang Dongsheng Acked-by: Timur Tabi Cc: stable@vger.kernel.org Signed-off-by: Tomi Valkeinen

Merge tag 'fbdev-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux

2015-11-10T18:00:09Z

Pull fbdev updates from Tomi Valkeinen: - omap: fix hdmi audio configuration issue - ssd1307fb: add ssd1309 support - tridentfb: support DDC - gxt4500: enable support for non-PPC platforms * tag 'fbdev-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: radeonfb: Deinline large functions gxt4500: enable panning gxt4500: Use arch_phys_wc_* for framebuffer gxt4500: fix color order gxt4500: fix 16bpp 565 mode gxt4500: enable on non-PPC architectures tridentfb: Add DDC support fb_ddc: Allow I2C adapters without SCL read capability fbdev: ssd1307fb: add ssd1309 support fbdev: ssd1307fb: alphabetize headers video/omap: remove invalid check OMAPDSS: hdmi: Reconfigure and restart audio when display is enabled

mm, page_alloc: distinguish between being unable to sleep, unwilling to sleep and avoiding waking kswapd

2015-11-07T01:50:42Z

__GFP_WAIT has been used to identify atomic context in callers that hold spinlocks or are in interrupts. They are expected to be high priority and have access one of two watermarks lower than "min" which can be referred to as the "atomic reserve". __GFP_HIGH users get access to the first lower watermark and can be called the "high priority reserve". Over time, callers had a requirement to not block when fallback options were available. Some have abused __GFP_WAIT leading to a situation where an optimisitic allocation with a fallback option can access atomic reserves. This patch uses __GFP_ATOMIC to identify callers that are truely atomic, cannot sleep and have no alternative. High priority users continue to use __GFP_HIGH. __GFP_DIRECT_RECLAIM identifies callers that can sleep and are willing to enter direct reclaim. __GFP_KSWAPD_RECLAIM to identify callers that want to wake kswapd for background reclaim. __GFP_WAIT is redefined as a caller that is willing to enter direct reclaim and wake kswapd for background reclaim. This patch then converts a number of sites o __GFP_ATOMIC is used by callers that are high priority and have memory pools for those requests. GFP_ATOMIC uses this flag. o Callers that have a limited mempool to guarantee forward progress clear __GFP_DIRECT_RECLAIM but keep __GFP_KSWAPD_RECLAIM. bio allocations fall into this category where kswapd will still be woken but atomic reserves are not used as there is a one-entry mempool to guarantee progress. o Callers that are checking if they are non-blocking should use the helper gfpflags_allow_blocking() where possible. This is because checking for __GFP_WAIT as was done historically now can trigger false positives. Some exceptions like dm-crypt.c exist where the code intent is clearer if __GFP_DIRECT_RECLAIM is used instead of the helper due to flag manipulations. o Callers that built their own GFP flags instead of starting with GFP_KERNEL and friends now also need to specify __GFP_KSWAPD_RECLAIM. The first key hazard to watch out for is callers that removed __GFP_WAIT and was depending on access to atomic reserves for inconspicuous reasons. In some cases it may be appropriate for them to use __GFP_HIGH. The second key hazard is callers that assembled their own combination of GFP flags instead of starting with something like GFP_KERNEL. They may now wish to specify __GFP_KSWAPD_RECLAIM. It's almost certainly harmless if it's missed in most cases as other activity will wake kswapd. Signed-off-by: Mel Gorman Acked-by: Vlastimil Babka Acked-by: Michal Hocko Acked-by: Johannes Weiner Cc: Christoph Lameter Cc: David Rientjes Cc: Vitaly Wool Cc: Rik van Riel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

Merge tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi

2015-11-05T21:15:12Z

Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...

Merge remote-tracking branches 'spi/topic/omap-100k', 'spi/topic/omap-uwire', 'spi/topic/owner', 'spi/topic/pxa' and 'spi/topic/pxa2xx' into spi-next

2015-11-04T11:02:12Z

spi: Drop owner assignment from spi_drivers

2015-10-28T01:30:17Z

An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis Acked-by: Jonathan Cameron Signed-off-by: Mark Brown

Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into core/efi

2015-10-14T14:51:34Z

Pull v4.4 EFI updates from Matt Fleming: - Make the EFI System Resource Table (ESRT) driver explicitly non-modular by ripping out the module_* code since Kconfig doesn't allow it to be built as a module anyway. (Paul Gortmaker) - Make the x86 efi=debug kernel parameter, which enables EFI debug code and output, generic and usable by arm64. (Leif Lindholm) - Add support to the x86 EFI boot stub for 64-bit Graphics Output Protocol frame buffer addresses. (Matt Fleming) - Detect when the UEFI v2.5 EFI_PROPERTIES_TABLE feature is enabled in the firmware and set an efi.flags bit so the kernel knows when it can apply more strict runtime mapping attributes - Ard Biesheuvel - Auto-load the efi-pstore module on EFI systems, just like we currently do for the efivars module. (Ben Hutchings) - Add "efi_fake_mem" kernel parameter which allows the system's EFI memory map to be updated with additional attributes for specific memory ranges. This is useful for testing the kernel code that handles the EFI_MEMORY_MORE_RELIABLE memmap bit even if your firmware doesn't include support. (Taku Izumi) Note: there is a semantic conflict between the following two commits: 8a53554e12e9 ("x86/efi: Fix multiple GOP device support") ae2ee627dc87 ("efifb: Add support for 64-bit frame buffer addresses") I fixed up the interaction in the merge commit, changing the type of current_fb_base from u32 to u64. Signed-off-by: Ingo Molnar

efifb: Add support for 64-bit frame buffer addresses

2015-10-12T13:20:06Z

The EFI Graphics Output Protocol uses 64-bit frame buffer addresses but these get truncated to 32-bit by the EFI boot stub when storing the address in the 'lfb_base' field of 'struct screen_info'. Add a 'ext_lfb_base' field for the upper 32-bits of the frame buffer address and set VIDEO_TYPE_CAPABILITY_64BIT_BASE when the field is useable. It turns out that the reason no one has required this support so far is that there's actually code in tianocore to "downgrade" PCI resources that have option ROMs and 64-bit BARS from 64-bit to 32-bit to cope with legacy option ROMs that can't handle 64-bit addresses. The upshot is that basically all GOP devices in the wild use a 32-bit frame buffer address. Still, it is possible to build firmware that uses a full 64-bit GOP frame buffer address. Chad did, which led to him reporting this issue. Add support in anticipation of GOP devices using 64-bit addresses more widely, and so that efifb works out of the box when that happens. Reported-by: Chad Page Cc: Pete Hawkins Acked-by: Peter Jones Cc: Matthew Garrett Cc: Geert Uytterhoeven Signed-off-by: Matt Fleming

radeonfb: Deinline large functions

2015-10-08T09:24:12Z

With this .config: http://busybox.net/~vda/kernel_config, after uninlining these functions have sizes and callsite counts as follows: __OUTPLLP: 61 bytes, 12 callsites __INPLL: 79 bytes, 150 callsites __OUTPLL: 82 bytes, 138 callsites _OUTREGP: 101 bytes, 8 callsites _radeon_msleep: 66 bytes, 18 callsites _radeon_fifo_wait: 83 bytes, 24 callsites _radeon_engine_idle: 92 bytes, 10 callsites radeon_engine_flush: 105 bytes, 2 callsites radeon_pll_errata_after_index_slow: 31 bytes, 11 callsites radeon_pll_errata_after_data_slow: 91 bytes, 9 callsites radeon_pll_errata_after_FOO functions are split into two parts: the inlined part which checks corresponding rinfo->errata bit, and out-of-line part which performs workaround magic per se. Reduction in code size is about 49,500 bytes: text data bss dec hex filename 85789648 22294616 20627456 128711720 7abfc28 vmlinux.before 85740176 22294680 20627456 128662312 7ab3b28 vmlinux Signed-off-by: Denys Vlasenko Cc: Benjamin Herrenschmidt Cc: Jean-Christophe Plagniol-Villard Cc: Tomi Valkeinen Cc: Richard Purdie Cc: Chris Wilson Cc: David Airlie Cc: Alex Deucher Cc: Ben Skeggs Cc: Zhang Rui Cc: Len Brown Cc: Jesse Barnes Cc: Dave Airlie Cc: linux-kernel@vger.kernel.org Cc: linux-fbdev@vger.kernel.org Signed-off-by: Tomi Valkeinen