user/sven/linux.git/drivers/video, branch v3.4.8

OMAPDSS: use DSI_FIFO_BUG workaround only for manual update displays

2012-07-16T16:04:27Z

commit 3568f2a46f2a73bab18c914df06afd98a97e0e0e upstream. There is a problem related to DSS FIFO thresholds and power management on OMAP3. It seems that when the full PM hits in, we get underflows. The core reason is unknown, but after experiments it looks like only particular FIFO thresholds work correctly. This bug is related to an earlier patch, which added special FIFO threshold configuration for OMAP3, because DSI command mode output didn't work with the normal threshold configuration. However, as the above work-around worked fine for other output types also, we currently always configure thresholds in this special way on OMAP3. In theory there should be negligible difference with this special way and the standard way. The first paragraph explains what happens in practice. This patch changes the driver to use the special threshold configuration only when the output is a manual update display on OMAP3. This does include RFBI displays also, and although it hasn't been tested (no boards using RFBI) I suspect the similar behaviour is present there also, as the DISPC side should work similarly for DSI command mode and RFBI. Signed-off-by: Tomi Valkeinen Cc: Joe Woodward Signed-off-by: Greg Kroah-Hartman

fbdev: sh_mobile_lcdc: Don't confuse line size with pitch

2012-06-01T07:18:16Z

commit 72c04af9a2d57b7945cf3de8e71461bd80695d50 upstream. When using the MERAM the LCDC line size needs to be programmed with a MERAM-specific value different than the real frame buffer pitch. Fix it. Reported-by: Guennadi Liakhovetski Signed-off-by: Laurent Pinchart Acked-by: Florian Tobias Schandinat Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2012-05-12T19:57:01Z

Pull networking fixes from David S. Miller: 1) Since we do RCU lookups on ipv4 FIB entries, we have to test if the entry is dead before returning it to our caller. 2) openvswitch locking and packet validation fixes from Ansis Atteka, Jesse Gross, and Pravin B Shelar. 3) Fix PM resume locking in IGB driver, from Benjamin Poirier. 4) Fix VLAN header handling in vhost-net and macvtap, from Basil Gor. 5) Revert a bogus network namespace isolation change that was causing regressions on S390 networking devices. 6) If bonding decides to process and handle a LACPDU frame, we shouldn't bump the rx_dropped counter. From Jiri Bohac. 7) Fix mis-calculation of available TX space in r8169 driver when doing TSO, which can lead to crashes and/or hung device. From Julien Ducourthial. 8) SCTP does not validate cached routes properly in all cases, from Nicolas Dichtel. 9) Link status interrupt needs to be handled in ks8851 driver, from Stephen Boyd. 10) Use capable(), not cap_raised(), in connector/userns netlink code. From Eric W. Biederman via Andrew Morton. 11) Fix pktgen OOPS on module unload, from Eric Dumazet. 12) iwlwifi under-estimates SKB truesizes, also from Eric Dumazet. 13) Cure division by zero in SFC driver, from Ben Hutchings. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (26 commits) ks8851: Update link status during link change interrupt macvtap: restore vlan header on user read vhost-net: fix handle_rx buffer size bonding: don't increase rx_dropped after processing LACPDUs connector/userns: replace netlink uses of cap_raised() with capable() sctp: check cached dst before using it pktgen: fix crash at module unload Revert "net: maintain namespace isolation between vlan and real device" ehea: fix losing of NEQ events when one event occurred early igb: fix rtnl race in PM resume path ipv4: Do not use dead fib_info entries. r8169: fix unsigned int wraparound with TSO sfc: Fix division by zero when using one RX channel and no SR-IOV openvswitch: Validation of IPv6 set port action uses IPv4 header net: compare_ether_addr[_64bits]() has no ordering cdc_ether: Ignore bogus union descriptor for RNDIS devices bnx2x: bug fix when loading after SAN boot e1000: Silence sparse warnings by correcting type igb, ixgbe: netdev_tx_reset_queue incorrectly called from tx init path openvswitch: Release rtnl_lock if ovs_vport_cmd_build_info() failed. ...

connector/userns: replace netlink uses of cap_raised() with capable()

2012-05-11T03:21:39Z

In 2009 Philip Reiser notied that a few users of netlink connector interface needed a capability check and added the idiom cap_raised(nsp->eff_cap, CAP_SYS_ADMIN) to a few of them, on the premise that netlink was asynchronous. In 2011 Patrick McHardy noticed we were being silly because netlink is synchronous and removed eff_cap from the netlink_skb_params and changed the idiom to cap_raised(current_cap(), CAP_SYS_ADMIN). Looking at those spots with a fresh eye we should be calling capable(CAP_SYS_ADMIN). The only reason I can see for not calling capable is that it once appeared we were not in the same task as the caller which would have made calling capable() impossible. In the initial user_namespace the only difference between between cap_raised(current_cap(), CAP_SYS_ADMIN) and capable(CAP_SYS_ADMIN) are a few sanity checks and the fact that capable(CAP_SYS_ADMIN) sets PF_SUPERPRIV if we use the capability. Since we are going to be using root privilege setting PF_SUPERPRIV seems the right thing to do. The motivation for this that patch is that in a child user namespace cap_raised(current_cap(),...) tests your capabilities with respect to that child user namespace not capabilities in the initial user namespace and thus will allow processes that should be unprivielged to use the kernel services that are only protected with cap_raised(current_cap(),..). To fix possible user_namespace issues and to just clean up the code replace cap_raised(current_cap(), CAP_SYS_ADMIN) with capable(CAP_SYS_ADMIN). Signed-off-by: Eric W. Biederman Cc: Patrick McHardy Cc: Philipp Reisner Acked-by: Serge E. Hallyn Acked-by: Andrew G. Morgan Cc: Vasiliy Kulikov Cc: David Howells Reviewed-by: James Morris Cc: David Miller Signed-off-by: Andrew Morton Signed-off-by: David S. Miller

parisc: move definition of PAGE0 to asm/page.h

2012-05-10T22:12:08Z

This was defined in asm/pdc.h which needs to include asm/page.h for __PAGE_OFFSET. This leads to an include loop so that page.h eventually will include pdc.h again. While this is no problem because of header guards, it is a problem because some symbols may be undefined. Such an error is this: In file included from include/linux/bitops.h:35:0, from include/asm-generic/getorder.h:7, from arch/parisc/include/asm/page.h:162, from arch/parisc/include/asm/pdc.h:346, from arch/parisc/include/asm/processor.h:16, from arch/parisc/include/asm/spinlock.h:6, from arch/parisc/include/asm/atomic.h:20, from include/linux/atomic.h:4, from include/linux/sysfs.h:20, from include/linux/kobject.h:21, from include/linux/device.h:17, from include/linux/eisa.h:5, from arch/parisc/kernel/pci.c:11: arch/parisc/include/asm/bitops.h: In function ‘set_bit’: arch/parisc/include/asm/bitops.h:82:2: error: implicit declaration of function ‘_atomic_spin_lock_irqsave’ [-Werror=implicit-function-declaration] arch/parisc/include/asm/bitops.h:84:2: error: implicit declaration of function ‘_atomic_spin_unlock_irqrestore’ [-Werror=implicit-function-declaration] Signed-off-by: Rolf Eike Beer Signed-off-by: Linus Torvalds

Merge tag 'stable/for-linus-3.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

2012-05-08T18:07:29Z

Pull xen fixes from Konrad Rzeszutek Wilk: - fix to Kconfig to make it fit within 80 line characters, - two bootup fixes (AMD 8-core and with PCI BIOS), - cleanup code in a Xen PV fb driver, - and a crash fix when trying to see non-existent PTE's * tag 'stable/for-linus-3.4-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/Kconfig: fix Kconfig layout xen/pci: don't use PCI BIOS service for configuration space accesses xen/pte: Fix crashes when trying to see non-existent PGD/PMD/PUD/PTEs xen/apic: Return the APIC ID (and version) for CPU 0. drivers/video/xen-fbfront.c: add missing cleanup code

drivers/video/xen-fbfront.c: add missing cleanup code

2012-05-07T10:41:56Z

The operations in the subsequent error-handling code appear to be also useful here. Acked-by: Florian Tobias Schandinat Signed-off-by: Julia Lawall [v1: Collapse some of the error handling functions] [v2: Fix compile warning] Signed-off-by: Konrad Rzeszutek Wilk

blackfin: fix compile error in bfin-lq035q1-fb.c

2012-04-26T18:46:51Z

This file has an implicit dependency on GPIO stuff, showing up as the following build failure: drivers/video/bfin-lq035q1-fb.c:369:6: error: 'GPIOF_OUT_INIT_LOW' undeclared Other more global bfin build issues prevent an automated bisect, but it really doesn't matter - simply add in the appropriate header. Cc: Florian Tobias Schandinat Acked-by: Mike Frysinger Signed-off-by: Paul Gortmaker

Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2012-04-15T18:14:54Z

Pull "ARM: a few more SoC fixes for 3.4-rc" from Olof Johansson: - A handful of warning and build fixes for Qualcomm MSM - Build/warning and bug fixes for Samsung Exynos - A fix from Rob Herring that removes misplaced interrupt-parent properties from a few device trees - A fix to OMAP dealing with cpufreq build errors, removing some of the offending code since it was redundant anyway * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: OMAP: clock: cleanup CPUfreq leftovers, fix build errors ARM: dts: remove blank interrupt-parent properties ARM: EXYNOS: Fix Kconfig dependencies for device tree enabled machine files ARM: EXYNOS: Remove broken config values for touchscren for NURI board ARM: EXYNOS: set fix xusbxti clock for NURI and Universal210 boards ARM: EXYNOS: fix regulator name for NURI board ARM: SAMSUNG: make SAMSUNG_PM_DEBUG select DEBUG_LL ARM: msm: Fix section mismatches in proc_comm.c video: msm: Fix section mismatches in mddi.c arm: msm: trout: fix compile failure arm: msm: halibut: remove unneeded fixup ARM: EXYNOS: Add PDMA and MDMA physical base address defines ARM: S5PV210: Fix compiler warning in dma.c file ARM: EXYNOS: Fix compile error in exynos5250-cpufreq.c ARM: EXYNOS: Add missing definition for IRQ_I2S0 ARM: S5PV210: fix unused LDO supply field from wm8994_pdata

video: msm: Fix section mismatches in mddi.c

2012-04-13T17:23:17Z

The change commit 461cbe77d0a4f887c33a3a95ea68a7daf23b4302 Author: Gregory Bean Date: Wed Jul 28 10:22:13 2010 -0700 video: msm: Fix section mismatch in mddi.c. fixes a section mismatch between the board file and the driver's probe function, however, it misses the additional mismatches between the probe function and some routines it calls. Fix these up as well. Signed-off-by: David Brown