user/sven/linux.git/drivers, branch v3.10.18

usb: serial: option: blacklist Olivetti Olicard200

2013-11-04T12:31:07Z

commit fd8573f5828873343903215f203f14dc82de397c upstream. Interface 6 of this device speaks QMI as per tests done by us. Credits go to Antonella for providing the hardware. Signed-off-by: Enrico Mioso Signed-off-by: Antonella Pellizzari Tested-by: Dan Williams Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add support for Inovia SEW858 device

2013-11-04T12:31:06Z

commit f4c19b8e165cff1a6607c21f8809441d61cab7ec upstream. This patch adds the device id for the Inovia SEW858 device to the option driver. Reported-by: Pavel Parkhomenko Tested-by: Pavel Parkhomenko Signed-off-by: Greg Kroah-Hartman

USB: serial: ti_usb_3410_5052: add Abbott strip port ID to combined table as well.

2013-11-04T12:31:06Z

commit c9d09dc7ad106492c17c587b6eeb99fe3f43e522 upstream. Without this change, the USB cable for Freestyle Option and compatible glucometers will not be detected by the driver. Signed-off-by: Diego Elio Pettenò Signed-off-by: Greg Kroah-Hartman

serial: vt8500: add missing braces

2013-11-04T12:31:06Z

commit d969de8d83401683420638c8107dcfedb2146f37 upstream. Due to missing braces on an if statement, in presence of a device_node a port was always assigned -1, regardless of any alias entries in the device tree. Conversely, if device_node was NULL, an unitialized port ended up being used. This patch adds the missing braces, fixing the issues. Signed-off-by: Roel Kluin Acked-by: Tony Prisk Signed-off-by: Greg Kroah-Hartman

i2c: ismt: initialize DMA buffer

2013-11-04T12:31:06Z

commit bf4169100c909667ede6af67668b3ecce6928343 upstream. This patch adds code to initialize the DMA buffer to compensate for possible hardware data corruption. Signed-off-by: James Ralston [wsa: changed to use 'sizeof'] Signed-off-by: Wolfram Sang Cc: Jean Delvare Signed-off-by: Greg Kroah-Hartman

dm snapshot: fix data corruption

2013-11-04T12:31:06Z

commit e9c6a182649f4259db704ae15a91ac820e63b0ca upstream. This patch fixes a particular type of data corruption that has been encountered when loading a snapshot's metadata from disk. When we allocate a new chunk in persistent_prepare, we increment ps->next_free and we make sure that it doesn't point to a metadata area by further incrementing it if necessary. When we load metadata from disk on device activation, ps->next_free is positioned after the last used data chunk. However, if this last used data chunk is followed by a metadata area, ps->next_free is positioned erroneously to the metadata area. A newly-allocated chunk is placed at the same location as the metadata area, resulting in data or metadata corruption. This patch changes the code so that ps->next_free skips the metadata area when metadata are loaded in function read_exceptions. The patch also moves a piece of code from persistent_prepare_exception to a separate function skip_metadata to avoid code duplication. CVE-2013-4299 Signed-off-by: Mikulas Patocka Cc: Mike Snitzer Signed-off-by: Alasdair G Kergon Signed-off-by: Greg Kroah-Hartman

gpio/lynxpoint: check if the interrupt is enabled in IRQ handler

2013-11-04T12:31:06Z

commit 03d152d5582abc8a1c19cb107164c3724bbd4be4 upstream. Checking LP_INT_STAT is not enough in the interrupt handler because its contents get updated regardless of whether the pin has interrupt enabled or not. This causes the driver to loop forever for GPIOs that are pulled up. Fix this by checking the interrupt enable bit for the pin as well. Signed-off-by: Mika Westerberg Acked-by: Mathias Nyman Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman

davinci_emac.c: Fix IFF_ALLMULTI setup

2013-11-04T12:31:05Z

[ Upstream commit d69e0f7ea95fef8059251325a79c004bac01f018 ] When IFF_ALLMULTI flag is set on interface and IFF_PROMISC isn't, emac_dev_mcast_set should only enable RX of multicasts and reset MACHASH registers. It does this, but afterwards it either sets up multicast MACs filtering or disables RX of multicasts and resets MACHASH registers again, rendering IFF_ALLMULTI flag useless. This patch fixes emac_dev_mcast_set, so that multicast MACs filtering and disabling of RX of multicasts are skipped when IFF_ALLMULTI flag is set. Tested with kernel 2.6.37. Signed-off-by: Mariusz Ceier Acked-by: Mugunthan V N Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

be2net: pass if_id for v1 and V2 versions of TX_CREATE cmd

2013-11-04T12:31:04Z

[ Upstream commit 0fb88d61bc60779dde88b0fc268da17eb81d0412 ] It is a required field for all TX_CREATE cmd versions > 0. This fixes a driver initialization failure, caused by recent SH-R Firmwares (versions > 10.0.639.0) failing the TX_CREATE cmd when if_id field is not passed. Signed-off-by: Sathya Perla Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

wanxl: fix info leak in ioctl

2013-11-04T12:31:04Z

[ Upstream commit 2b13d06c9584b4eb773f1e80bbaedab9a1c344e1 ] The wanxl_ioctl() code fails to initialize the two padding bytes of struct sync_serial_settings after the ->loopback member. Add an explicit memset(0) before filling the structure to avoid the info leak. Signed-off-by: Salva Peiró Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman