user/sven/linux.git/drivers, branch v3.12.18

isdnloop: several buffer overflows

2014-04-18T09:07:19Z

[ Upstream commit 7563487cbf865284dcd35e9ef5a95380da046737 ] There are three buffer overflows addressed in this patch. 1) In isdnloop_fake_err() we add an 'E' to a 60 character string and then copy it into a 60 character buffer. I have made the destination buffer 64 characters and I'm changed the sprintf() to a snprintf(). 2) In isdnloop_parse_cmd(), p points to a 6 characters into a 60 character buffer so we have 54 characters. The ->eazlist[] is 11 characters long. I have modified the code to return if the source buffer is too long. 3) In isdnloop_command() the cbuf[] array was 60 characters long but the max length of the string then can be up to 79 characters. I made the cbuf array 80 characters long and changed the sprintf() to snprintf(). I also removed the temporary "dial" buffer and changed it to use "p" directly. Unfortunately, we pass the "cbuf" string from isdnloop_command() to isdnloop_writecmd() which truncates anything over 60 characters to make it fit in card->omsg[]. (It can accept values up to 255 characters so long as there is a '\n' character every 60 characters). For now I have just fixed the memory corruption bug and left the other problems in this driver alone. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby

isdnloop: Validate NUL-terminated strings from user.

2014-04-18T09:07:18Z

[ Upstream commit 77bc6bed7121936bb2e019a8c336075f4c8eef62 ] Return -EINVAL unless all of user-given strings are correctly NUL-terminated. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby

net: vxlan: fix crash when interface is created with no group

2014-04-18T09:07:17Z

[ Upstream commit 5933a7bbb5de66482ea8aa874a7ebaf8e67603c4 ] If the vxlan interface is created without explicit group definition, there are corner cases which may cause kernel panic. For instance, in the following scenario: node A: $ ip link add dev vxlan42 address 2c:c2:60:00:10:20 type vxlan id 42 $ ip addr add dev vxlan42 10.0.0.1/24 $ ip link set up dev vxlan42 $ arp -i vxlan42 -s 10.0.0.2 2c:c2:60:00:01:02 $ bridge fdb add dev vxlan42 to 2c:c2:60:00:01:02 dst $ ping 10.0.0.2 node B: $ ip link add dev vxlan42 address 2c:c2:60:00:01:02 type vxlan id 42 $ ip addr add dev vxlan42 10.0.0.2/24 $ ip link set up dev vxlan42 $ arp -i vxlan42 -s 10.0.0.1 2c:c2:60:00:10:20 node B crashes: vxlan42: 2c:c2:60:00:10:20 migrated from 4011:eca4:c0a8:6466:c0a8:6415:8e09:2118 to (invalid address) vxlan42: 2c:c2:60:00:10:20 migrated from 4011:eca4:c0a8:6466:c0a8:6415:8e09:2118 to (invalid address) BUG: unable to handle kernel NULL pointer dereference at 0000000000000046 IP: [] ip6_route_output+0x58/0x82 PGD 7bd89067 PUD 7bd4e067 PMD 0 Oops: 0000 [#1] SMP Modules linked in: CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.14.0-rc8-hvx-xen-00019-g97a5221-dirty #154 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 task: ffff88007c774f50 ti: ffff88007c79c000 task.ti: ffff88007c79c000 RIP: 0010:[] [] ip6_route_output+0x58/0x82 RSP: 0018:ffff88007fd03668 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffffffff8186a000 RCX: 0000000000000040 RDX: 0000000000000000 RSI: ffff88007b0e4a80 RDI: ffff88007fd03754 RBP: ffff88007fd03688 R08: ffff88007b0e4a80 R09: 0000000000000000 R10: 0200000a0100000a R11: 0001002200000000 R12: ffff88007fd03740 R13: ffff88007b0e4a80 R14: ffff88007b0e4a80 R15: ffff88007bba0c50 FS: 0000000000000000(0000) GS:ffff88007fd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000046 CR3: 000000007bb60000 CR4: 00000000000006e0 Stack: 0000000000000000 ffff88007fd037a0 ffffffff8186a000 ffff88007fd03740 ffff88007fd036c8 ffffffff814320bb 0000000000006e49 ffff88007b8b7360 ffff88007bdbf200 ffff88007bcbc000 ffff88007b8b7000 ffff88007b8b7360 Call Trace: [] ip6_dst_lookup_tail+0x2d/0xa4 [] ip6_dst_lookup+0x10/0x12 [] vxlan_xmit_one+0x32a/0x68c [] ? _raw_spin_unlock_irqrestore+0x12/0x14 [] ? lock_timer_base.isra.23+0x26/0x4b [] vxlan_xmit+0x66a/0x6a8 [] ? ipt_do_table+0x35f/0x37e [] ? selinux_ip_postroute+0x41/0x26e [] dev_hard_start_xmit+0x2ce/0x3ce [] __dev_queue_xmit+0x2d0/0x392 [] ? eth_header+0x28/0xb5 [] dev_queue_xmit+0xb/0xd [] neigh_resolve_output+0x134/0x152 [] ip_finish_output2+0x236/0x299 [] ip_finish_output+0x98/0x9d [] ip_output+0x62/0x67 [] dst_output+0xf/0x11 [] ip_local_out+0x1b/0x1f [] ip_send_skb+0x11/0x37 [] ip_push_pending_frames+0x2f/0x33 [] icmp_push_reply+0x106/0x115 [] icmp_reply+0x142/0x164 [] icmp_echo.part.16+0x46/0x48 [] ? nf_iterate+0x43/0x80 [] ? xfrm4_policy_check.constprop.11+0x52/0x52 [] icmp_echo+0x25/0x27 [] icmp_rcv+0x1d2/0x20a [] ? xfrm4_policy_check.constprop.11+0x52/0x52 [] ip_local_deliver_finish+0xd6/0x14f [] ? xfrm4_policy_check.constprop.11+0x52/0x52 [] NF_HOOK.constprop.10+0x4c/0x53 [] ip_local_deliver+0x4a/0x4f [] ip_rcv_finish+0x253/0x26a [] ? inet_add_protocol+0x3e/0x3e [] NF_HOOK.constprop.10+0x4c/0x53 [] ip_rcv+0x2a6/0x2ec [] __netif_receive_skb_core+0x43e/0x478 [] ? virtqueue_poll+0x16/0x27 [] __netif_receive_skb+0x55/0x5a [] process_backlog+0x76/0x12f [] net_rx_action+0xa2/0x1ab [] __do_softirq+0xca/0x1d1 [] irq_exit+0x3e/0x85 [] do_IRQ+0xa9/0xc4 [] common_interrupt+0x6d/0x6d [] ? native_safe_halt+0x6/0x8 [] default_idle+0x9/0xd [] arch_cpu_idle+0x13/0x1c [] cpu_startup_entry+0xbc/0x137 [] start_secondary+0x1a0/0x1a5 Code: 24 14 e8 f1 e5 01 00 31 d2 a8 32 0f 95 c2 49 8b 44 24 2c 49 0b 44 24 24 74 05 83 ca 04 eb 1c 4d 85 ed 74 17 49 8b 85 a8 02 00 00 <66> 8b 40 46 66 c1 e8 07 83 e0 07 c1 e0 03 09 c2 4c 89 e6 48 89 RIP [] ip6_route_output+0x58/0x82 RSP CR2: 0000000000000046 ---[ end trace 4612329caab37efd ]--- When vxlan interface is created without explicit group definition, the default_dst protocol family is initialiazed to AF_UNSPEC and the driver assumes IPv4 configuration. On the other side, the default_dst protocol family is used to differentiate between IPv4 and IPv6 cases and, since, AF_UNSPEC != AF_INET, the processing takes the IPv6 path. Making the IPv4 assumption explicit by settting default_dst protocol family to AF_INET4 and preventing mixing of IPv4 and IPv6 addresses in snooped fdb entries fixes the corner case crashes. Signed-off-by: Mike Rapoport Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby

xen-netback: disable rogue vif in kthread context

2014-04-18T09:07:17Z

[ Upstream commit e9d8b2c2968499c1f96563e6522c56958d5a1d0d ] When netback discovers frontend is sending malformed packet it will disables the interface which serves that frontend. However disabling a network interface involving taking a mutex which cannot be done in softirq context, so we need to defer this process to kthread context. This patch does the following: 1. introduce a flag to indicate the interface is disabled. 2. check that flag in TX path, don't do any work if it's true. 3. check that flag in RX path, turn off that interface if it's true. The reason to disable it in RX path is because RX uses kthread. After this change the behavior of netback is still consistent -- it won't do any TX work for a rogue frontend, and the interface will be eventually turned off. Also change a "continue" to "break" after xenvif_fatal_tx_err, as it doesn't make sense to continue processing packets if frontend is rogue. This is a fix for XSA-90. Reported-by: Török Edwin Signed-off-by: Wei Liu Cc: Ian Campbell Reviewed-by: David Vrabel Acked-by: Ian Campbell Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby

xen-netback: remove pointless clause from if statement

2014-04-18T09:07:15Z

[ Upstream commit 0576eddf24df716d8570ef8ca11452a9f98eaab2 ] This patch removes a test in start_new_rx_buffer() that checks whether a copy operation is less than MAX_BUFFER_OFFSET in length, since MAX_BUFFER_OFFSET is defined to be PAGE_SIZE and the only caller of start_new_rx_buffer() already limits copy operations to PAGE_SIZE or less. Signed-off-by: Paul Durrant Cc: Ian Campbell Cc: Wei Liu Cc: Sander Eikelenboom Reported-By: Sander Eikelenboom Tested-By: Sander Eikelenboom Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby

vhost: validate vhost_get_vq_desc return value

2014-04-18T09:07:15Z

[ Upstream commit a39ee449f96a2cd44ce056d8a0a112211a9b1a1f ] vhost fails to validate negative error code from vhost_get_vq_desc causing a crash: we are using -EFAULT which is 0xfffffff2 as vector size, which exceeds the allocated size. The code in question was introduced in commit 8dd014adfea6f173c1ef6378f7e5e7924866c923 vhost-net: mergeable buffers support CVE-2014-0055 Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby

vhost: fix total length when packets are too short

2014-04-18T09:07:14Z

[ Upstream commit d8316f3991d207fe32881a9ac20241be8fa2bad0 ] When mergeable buffers are disabled, and the incoming packet is too large for the rx buffer, get_rx_bufs returns success. This was intentional in order for make recvmsg truncate the packet and then handle_rx would detect err != sock_len and drop it. Unfortunately we pass the original sock_len to recvmsg - which means we use parts of iov not fully validated. Fix this up by detecting this overrun and doing packet drop immediately. CVE-2014-0077 Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby

usbnet: include wait queue head in device structure

2014-04-18T09:07:13Z

[ Upstream commit 14a0d635d18d0fb552dcc979d6d25106e6541f2e ] This fixes a race which happens by freeing an object on the stack. Quoting Julius: > The issue is > that it calls usbnet_terminate_urbs() before that, which temporarily > installs a waitqueue in dev->wait in order to be able to wait on the > tasklet to run and finish up some queues. The waiting itself looks > okay, but the access to 'dev->wait' is totally unprotected and can > race arbitrarily. I think in this case usbnet_bh() managed to succeed > it's dev->wait check just before usbnet_terminate_urbs() sets it back > to NULL. The latter then finishes and the waitqueue_t structure on its > stack gets overwritten by other functions halfway through the > wake_up() call in usbnet_bh(). The fix is to just not allocate the data structure on the stack. As dev->wait is abused as a flag it also takes a runtime PM change to fix this bug. Signed-off-by: Oliver Neukum Reported-by: Grant Grundler Tested-by: Grant Grundler Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby

tg3: Do not include vlan acceleration features in vlan_features

2014-04-18T09:07:12Z

[ Upstream commit 51dfe7b944998eaeb2b34d314f3a6b16a5fd621b ] Including hardware acceleration features in vlan_features breaks stacked vlans (Q-in-Q) by marking the bottom vlan interface as capable of acceleration. This causes one of the tags to be lost and the packets are sent with a sing vlan header. CC: Nithin Nayak Sujir CC: Michael Chan Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby

net: micrel : ks8851-ml: add vdd-supply support

2014-04-18T09:07:10Z

[ Upstream commit ebf4ad955d3e26d4d2a33709624fc7b5b9d3b969 ] Few platforms use external regulator to keep the ethernet MAC supplied. So, request and enable the regulator for driver functionality. Fixes: 66fda75f47dc (regulator: core: Replace direct ops->disable usage) Reported-by: Russell King Suggested-by: Markus Pargmann Signed-off-by: Nishanth Menon Signed-off-by: David S. Miller Signed-off-by: Jiri Slaby