user/sven/linux.git/drivers, branch v3.18.28

drm/qxl: use kmalloc_array to alloc reloc_info in qxl_process_single_command

2016-03-04T15:18:43Z

[ Upstream commit 34855706c30d52b0a744da44348b5d1cc39fbe51 ] This avoids integer overflows on 32bit machines when calculating reloc_info size, as reported by Alan Cox. Cc: stable@vger.kernel.org Cc: gnomes@lxorguk.ukuu.org.uk Signed-off-by: Gerd Hoffmann Reviewed-by: Daniel Vetter Signed-off-by: Dave Airlie Signed-off-by: Sasha Levin

drm/radeon: use post-decrement in error handling

2016-03-04T15:18:43Z

[ Upstream commit bc3f5d8c4ca01555820617eb3b6c0857e4df710d ] We need to use post-decrement to get the pci_map_page undone also for i==0, and to avoid some very unpleasant behaviour if pci_map_page failed already at i==0. Reviewed-by: Christian König Signed-off-by: Rasmus Villemoes Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin

dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer

2016-03-04T15:18:42Z

[ Upstream commit ee1cdcdae59563535485a5f56ee72c894ab7d7ad ] The commit 2895b2cad6e7 ("dmaengine: dw: fix cyclic transfer callbacks") re-enabled BLOCK interrupts with regard to make cyclic transfers work. However, this change becomes a regression for non-cyclic transfers as interrupt counters under stress test had been grown enormously (approximately per 4-5 bytes in the UART loop back test). Taking into consideration above enable BLOCK interrupts if and only if channel is programmed to perform cyclic transfer. Fixes: 2895b2cad6e7 ("dmaengine: dw: fix cyclic transfer callbacks") Signed-off-by: Andy Shevchenko Acked-by: Mans Rullgard Tested-by: Mans Rullgard Acked-by: Viresh Kumar Cc: Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

s390/dasd: fix refcount for PAV reassignment

2016-03-04T15:18:40Z

[ Upstream commit 9d862ababb609439c5d6987f6d3ddd09e703aa0b ] Add refcount to the DASD device when a summary unit check worker is scheduled. This prevents that the device is set offline with worker in place. Cc: stable@vger.kernel.org Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky Signed-off-by: Sasha Levin

s390/dasd: prevent incorrect length error under z/VM after PAV changes

2016-03-04T15:18:40Z

[ Upstream commit 020bf042e5b397479c1174081b935d0ff15d1a64 ] The channel checks the specified length and the provided amount of data for CCWs and provides an incorrect length error if the size does not match. Under z/VM with simulation activated the length may get changed. Having the suppress length indication bit set is stated as good CCW coding practice and avoids errors under z/VM. Cc: stable@vger.kernel.org Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky Signed-off-by: Sasha Levin

drm/radeon: hold reference to fences in radeon_sa_bo_new

2016-03-04T15:18:40Z

[ Upstream commit f6ff4f67cdf8455d0a4226eeeaf5af17c37d05eb ] An arbitrary amount of time can pass between spin_unlock and radeon_fence_wait_any, so we need to ensure that nobody frees the fences from under us. Based on the analogous fix for amdgpu. Signed-off-by: Nicolai Hähnle Reviewed-by: Christian König Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin

ahci: Intel DNV device IDs SATA

2016-03-04T15:18:40Z

[ Upstream commit 342decff2b846b46fa61eb5ee40986fab79a9a32 ] Adding Intel codename DNV platform device IDs for SATA. Signed-off-by: Alexandra Yates Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org Signed-off-by: Sasha Levin

phy: twl4030-usb: Fix unbalanced pm_runtime_enable on module reload

2016-03-04T15:18:39Z

[ Upstream commit 58a66dba1beac2121d931cda4682ae4d40816af5 ] If we reload phy-twl4030-usb, we get a warning about unbalanced pm_runtime_enable. Let's fix the issue and also fix idling of the device on unload before we attempt to shut it down. If we don't properly idle the PHY before shutting it down on removal, the twl4030 ends up consuming about 62mW of extra power compared to running idle with the module loaded. Cc: stable@vger.kernel.org Cc: Bin Liu Cc: Felipe Balbi Cc: Kishon Vijay Abraham I Cc: NeilBrown Signed-off-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: twl4030-usb: Relase usb phy on unload

2016-03-04T15:18:39Z

[ Upstream commit b241d31ef2f6a289d33dcaa004714b26e06f476f ] Otherwise rmmod omap2430; rmmod phy-twl4030-usb; modprobe omap2430 will try to use a non-existing phy and oops: Unable to handle kernel paging request at virtual address b6f7c1f0 ... [] (devm_usb_get_phy_by_node) from [] (omap2430_musb_init+0x44/0x2b4 [omap2430]) [] (omap2430_musb_init [omap2430]) from [] (musb_init_controller+0x194/0x878 [musb_hdrc]) Cc: stable@vger.kernel.org Cc: Bin Liu Cc: Felipe Balbi Cc: Kishon Vijay Abraham I Cc: NeilBrown Signed-off-by: Tony Lindgren Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin

phy: core: fix wrong err handle for phy_power_on

2016-03-04T15:18:39Z

[ Upstream commit b82fcabe212a11698fd4b3e604d2f81d929d22f6 ] If phy_pm_runtime_get_sync failed but we already enable regulator, current code return directly without doing regulator_disable. This patch fix this problem and cleanup err handle of phy_power_on to be more readable. Fixes: 3be88125d85d ("phy: core: Support regulator ...") Cc: # v3.18+ Cc: Roger Quadros Cc: Axel Lin Signed-off-by: Shawn Lin Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Sasha Levin