user/sven/linux.git/drivers, branch v4.14.26

nvme-rdma: don't suppress send completions

2018-03-09T06:41:26Z

commit b4b591c87f2b0f4ebaf3a68d4f13873b241aa584 upstream. The entire completions suppress mechanism is currently broken because the HCA might retry a send operation (due to dropped ack) after the nvme transaction has completed. In order to handle this, we signal all send completions and introduce a separate done handler for async events as they will be handled differently (as they don't include in-capsule data by definition). Signed-off-by: Sagi Grimberg Reviewed-by: Max Gurtovoy Signed-off-by: Christoph Hellwig Signed-off-by: Greg Kroah-Hartman

md: only allow remove_and_add_spares when no sync_thread running.

2018-03-09T06:41:26Z

commit 39772f0a7be3b3dc26c74ea13fe7847fd1522c8b upstream. The locking protocols in md assume that a device will never be removed from an array during resync/recovery/reshape. When that isn't happening, rcu or reconfig_mutex is needed to protect an rdev pointer while taking a refcount. When it is happening, that protection isn't needed. Unfortunately there are cases were remove_and_add_spares() is called when recovery might be happening: is state_store(), slot_store() and hot_remove_disk(). In each case, this is just an optimization, to try to expedite removal from the personality so the device can be removed from the array. If resync etc is happening, we just have to wait for md_check_recover to find a suitable time to call remove_and_add_spares(). This optimization and not essential so it doesn't matter if it fails. So change remove_and_add_spares() to abort early if resync/recovery/reshape is happening, unless it is called from md_check_recovery() as part of a newly started recovery. The parameter "this" is only NULL when called from md_check_recovery() so when it is NULL, there is no need to abort. As this can result in a NULL dereference, the fix is suitable for -stable. cc: yuyufen Cc: Tomasz Majchrzak Fixes: 8430e7e0af9a ("md: disconnect device from personality before trying to remove it.") Cc: stable@ver.kernel.org (v4.8+) Signed-off-by: NeilBrown Signed-off-by: Shaohua Li Signed-off-by: Greg Kroah-Hartman

ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530

2018-03-09T06:41:26Z

commit 36904703aeeeb6cd31993f1353c8325006229f9a upstream. The i2c touchpad on Dell XPS 9570 and Precision M5530 doesn't work out of box. The touchpad relies on its _INI method to update its _HID value from XXXX0000 to SYNA2393. Also, the _STA relies on value of I2CN to report correct status. Set acpi_gbl_parse_table_as_term_list so the value of I2CN can be correctly set up, and _INI can get run. The ACPI table in this machine is designed to get parsed this way. Also, change the quirk table to a more generic name. Link: https://bugzilla.kernel.org/show_bug.cgi?id=198515 Signed-off-by: Kai-Heng Feng Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

PCI/ASPM: Deal with missing root ports in link state handling

2018-03-09T06:41:25Z

commit ee8bdfb6568d86bb93f55f8d99c4c643e77304ee upstream. Even though it is unconventional, some PCIe host implementations omit the root ports entirely, and simply consist of a host bridge (which is not modeled as a device in the PCI hierarchy) and a link. When the downstream device is an endpoint, our current code does not seem to mind this unusual configuration. However, when PCIe switches are involved, the ASPM code assumes that any downstream switch port has a parent, and blindly dereferences the bus->parent->self field of the pci_dev struct to chain the downstream link state to the link state of the root port. Given that the root port is missing, the link is not modeled at all, and nor is the link state, and attempting to access it results in a NULL pointer dereference and a crash. Avoid this by allowing the link state chain to terminate at the downstream port if no root port exists. Signed-off-by: Ard Biesheuvel Signed-off-by: Bjorn Helgaas Signed-off-by: Greg Kroah-Hartman

EDAC, sb_edac: Fix out of bound writes during DIMM configuration on KNL

2018-03-09T06:41:20Z

commit bf8486709ac7fad99e4040dea73fe466c57a4ae1 upstream. Commit 3286d3eb906c ("EDAC, sb_edac: Drop NUM_CHANNELS from 8 back to 4") decreased NUM_CHANNELS from 8 to 4, but this is not enough for Knights Landing which supports up to 6 channels. This caused out-of-bounds writes to pvt->mirror_mode and pvt->tolm variables which don't pay critical role on KNL code path, so the memory corruption wasn't causing any visible driver failures. The easiest way of fixing it is to change NUM_CHANNELS to 6. Do that. An alternative solution would be to restructure the KNL part of the driver to 2MC/3channel representation. Reported-by: Dan Carpenter Signed-off-by: Anna Karbownik Cc: Mauro Carvalho Chehab Cc: Tony Luck Cc: jim.m.snow@intel.com Cc: krzysztof.paliswiat@intel.com Cc: lukasz.odzioba@intel.com Cc: qiuxu.zhuo@intel.com Cc: linux-edac Cc: Fixes: 3286d3eb906c ("EDAC, sb_edac: Drop NUM_CHANNELS from 8 back to 4") Link: http://lkml.kernel.org/r/1519312693-4789-1-git-send-email-anna.karbownik@intel.com [ Massage commit message. ] Signed-off-by: Borislav Petkov Signed-off-by: Greg Kroah-Hartman

media: m88ds3103: don't call a non-initalized function

2018-03-09T06:41:20Z

commit b9c97c67fd19262c002d94ced2bfb513083e161e upstream. If m88d3103 chip ID is not recognized, the device is not initialized. However, it returns from probe without any error, causing this OOPS: [ 7.689289] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 7.689297] pgd = 7b0bd7a7 [ 7.689302] [00000000] *pgd=00000000 [ 7.689318] Internal error: Oops: 80000005 [#1] SMP ARM [ 7.689322] Modules linked in: dvb_usb_dvbsky(+) m88ds3103 dvb_usb_v2 dvb_core videobuf2_vmalloc videobuf2_memops videobuf2_core crc32_arm_ce videodev media [ 7.689358] CPU: 3 PID: 197 Comm: systemd-udevd Not tainted 4.15.0-mcc+ #23 [ 7.689361] Hardware name: BCM2835 [ 7.689367] PC is at 0x0 [ 7.689382] LR is at m88ds3103_attach+0x194/0x1d0 [m88ds3103] [ 7.689386] pc : [<00000000>] lr : [] psr: 60000013 [ 7.689391] sp : ed8e5c20 ip : ed8c1e00 fp : ed8945c0 [ 7.689395] r10: ed894000 r9 : ed894378 r8 : eda736c0 [ 7.689400] r7 : ed894070 r6 : ed8e5c44 r5 : bf0bb040 r4 : eda77600 [ 7.689405] r3 : 00000000 r2 : 00000000 r1 : 00000000 r0 : eda77600 [ 7.689412] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none [ 7.689417] Control: 10c5383d Table: 2d8e806a DAC: 00000051 [ 7.689423] Process systemd-udevd (pid: 197, stack limit = 0xe9dbfb63) [ 7.689428] Stack: (0xed8e5c20 to 0xed8e6000) [ 7.689439] 5c20: ed853a80 eda73640 ed894000 ed8942c0 ed853a80 bf0b9e98 ed894070 bf0b9f10 [ 7.689449] 5c40: 00000000 00000000 bf08c17c c08dfc50 00000000 00000000 00000000 00000000 [ 7.689459] 5c60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689468] 5c80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689479] 5ca0: 00000000 00000000 ed8945c0 ed8942c0 ed894000 ed894830 bf0b9e98 00000000 [ 7.689490] 5cc0: ed894378 bf0a3cb4 bf0bc3b0 0000533b ed920540 00000000 00000034 bf0a6434 [ 7.689500] 5ce0: ee952070 ed826600 bf0a7038 bf0a2dd8 00000001 bf0a6768 bf0a2f90 ed8943c0 [ 7.689511] 5d00: 00000000 c08eca68 ed826620 ed826620 00000000 ee952070 bf0bc034 ee952000 [ 7.689521] 5d20: ed826600 bf0bb080 ffffffed c0aa9e9c c0aa9dac ed826620 c16edf6c c168c2c8 [ 7.689531] 5d40: c16edf70 00000000 bf0bc034 0000000d 00000000 c08e268c bf0bb080 ed826600 [ 7.689541] 5d60: bf0bc034 ed826654 ed826620 bf0bc034 c164c8bc 00000000 00000001 00000000 [ 7.689553] 5d80: 00000028 c08e2948 00000000 bf0bc034 c08e2848 c08e0778 ee9f0a58 ed88bab4 [ 7.689563] 5da0: bf0bc034 ed90ba80 c168c1f0 c08e1934 bf0bb3bc c17045ac bf0bc034 c164c8bc [ 7.689574] 5dc0: bf0bc034 bf0bb3bc ed91f564 c08e34ec bf0bc000 c164c8bc bf0bc034 c0aa8dc4 [ 7.689584] 5de0: ffffe000 00000000 bf0bf000 ed91f600 ed91f564 c03021e4 00000001 00000000 [ 7.689595] 5e00: c166e040 8040003f ed853a80 bf0bc448 00000000 c1678174 ed853a80 f0f22000 [ 7.689605] 5e20: f0f21fff 8040003f 014000c0 ed91e700 ed91e700 c16d8e68 00000001 ed91e6c0 [ 7.689615] 5e40: bf0bc400 00000001 bf0bc400 ed91f564 00000001 00000000 00000028 c03c9a24 [ 7.689625] 5e60: 00000001 c03c8c94 ed8e5f50 ed8e5f50 00000001 bf0bc400 ed91f540 c03c8cb0 [ 7.689637] 5e80: bf0bc40c 00007fff bf0bc400 c03c60b0 00000000 bf0bc448 00000028 c0e09684 [ 7.689647] 5ea0: 00000002 bf0bc530 c1234bf8 bf0bc5dc bf0bc514 c10ebbe8 ffffe000 bf000000 [ 7.689657] 5ec0: 00011538 00000000 ed8e5f48 00000000 00000000 00000000 00000000 00000000 [ 7.689666] 5ee0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 7.689676] 5f00: 00000000 00000000 7fffffff 00000000 00000013 b6e55a18 0000017b c0309104 [ 7.689686] 5f20: ed8e4000 00000000 00510af0 c03c9430 7fffffff 00000000 00000003 00000000 [ 7.689697] 5f40: 00000000 f0f0f000 00011538 00000000 f0f107b0 f0f0f000 00011538 f0f1fdb8 [ 7.689707] 5f60: f0f1fbe8 f0f1b974 00004000 000041e0 bf0bc3d0 00000001 00000000 000024c4 [ 7.689717] 5f80: 0000002d 0000002e 00000019 00000000 00000010 00000000 16894000 00000000 [ 7.689727] 5fa0: 00000000 c0308f20 16894000 00000000 00000013 b6e55a18 00000000 b6e5652c [ 7.689737] 5fc0: 16894000 00000000 00000000 0000017b 00020000 00508110 00000000 00510af0 [ 7.689748] 5fe0: bef68948 bef68938 b6e4d3d0 b6d32590 60000010 00000013 00000000 00000000 [ 7.689790] [] (m88ds3103_attach [m88ds3103]) from [] (dvbsky_s960c_attach+0x78/0x280 [dvb_usb_dvbsky]) [ 7.689821] [] (dvbsky_s960c_attach [dvb_usb_dvbsky]) from [] (dvb_usbv2_probe+0xa3c/0x1024 [dvb_usb_v2]) [ 7.689849] [] (dvb_usbv2_probe [dvb_usb_v2]) from [] (usb_probe_interface+0xf0/0x2a8) [ 7.689869] [] (usb_probe_interface) from [] (driver_probe_device+0x2f8/0x4b4) [ 7.689881] [] (driver_probe_device) from [] (__driver_attach+0x100/0x11c) [ 7.689895] [] (__driver_attach) from [] (bus_for_each_dev+0x4c/0x9c) [ 7.689909] [] (bus_for_each_dev) from [] (bus_add_driver+0x1c0/0x264) [ 7.689919] [] (bus_add_driver) from [] (driver_register+0x78/0xf4) [ 7.689931] [] (driver_register) from [] (usb_register_driver+0x70/0x134) [ 7.689946] [] (usb_register_driver) from [] (do_one_initcall+0x44/0x168) [ 7.689963] [] (do_one_initcall) from [] (do_init_module+0x64/0x1f4) [ 7.689979] [] (do_init_module) from [] (load_module+0x20a0/0x25c8) [ 7.689993] [] (load_module) from [] (SyS_finit_module+0xb4/0xec) [ 7.690007] [] (SyS_finit_module) from [] (ret_fast_syscall+0x0/0x54) [ 7.690018] Code: bad PC value This may happen on normal circumstances, if, for some reason, the demod hangs and start returning an invalid chip ID: [ 10.394395] m88ds3103 3-0068: Unknown device. Chip_id=00 So, change the logic to cause probe to fail with -ENODEV, preventing the OOPS. Detected while testing DVB MMAP patches on Raspberry Pi 3 with DVBSky S960CI. Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman

s390/qeth: fix IPA command submission race

2018-03-09T06:41:20Z

[ Upstream commit d22ffb5a712f9211ffd104c38fc17cbfb1b5e2b0 ] If multiple IPA commands are build & sent out concurrently, fill_ipacmd_header() may assign a seqno value to a command that's different from what send_control_data() later assigns to this command's reply. This is due to other commands passing through send_control_data(), and incrementing card->seqno.ipa along the way. So one IPA command has no reply that's waiting for its seqno, while some other IPA command has multiple reply objects waiting for it. Only one of those waiting replies wins, and the other(s) times out and triggers a recovery via send_ipa_cmd(). Fix this by making sure that the same seqno value is assigned to a command and its reply object. Do so immediately before submitting the command & while holding the irq_pending "lock", to produce nicely ascending seqnos. As a side effect, *all* IPA commands now use a reply object that's waiting for its actual seqno. Previously, early IPA commands that were submitted while the card was still DOWN used the "catch-all" IDX seqno. Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

s390/qeth: fix IP address lookup for L3 devices

2018-03-09T06:41:19Z

[ Upstream commit c5c48c58b259bb8f0482398370ee539d7a12df3e ] Current code ("qeth_l3_ip_from_hash()") matches a queried address object against objects in the IP table by IP address, Mask/Prefix Length and MAC address ("qeth_l3_ipaddrs_is_equal()"). But what callers actually require is either a) "is this IP address registered" (ie. match by IP address only), before adding a new address. b) or "is this address object registered" (ie. match all relevant attributes), before deleting an address. Right now 1. the ADD path is too strict in its lookup, and eg. doesn't detect conflicts between an existing NORMAL address and a new VIPA address (because the NORMAL address will have mask != 0, while VIPA has a mask == 0), 2. the DELETE path is not strict enough, and eg. allows del_rxip() to delete a VIPA address as long as the IP address matches. Fix all this by adding helpers (_addr_match_ip() and _addr_match_all()) that do the appropriate checking. Note that the ADD path for NORMAL addresses is special, as qeth keeps track of how many times such an address is in use (and there is no immediate way of returning errors to the caller). So when a requested NORMAL address _fully_ matches an existing one, it's not considered a conflict and we merely increment the refcount. Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

Revert "s390/qeth: fix using of ref counter for rxip addresses"

2018-03-09T06:41:19Z

[ Upstream commit 4964c66fd49b2e2342da35358f2ff74614bcbaee ] This reverts commit cb816192d986f7596009dedcf2201fe2e5bc2aa7. The issue this attempted to fix never actually occurs. l3_add_rxip() checks (via l3_ip_from_hash()) if the requested address was previously added to the card. If so, it returns -EEXIST and doesn't call l3_add_ip(). As a result, the "address exists" path in l3_add_ip() is never taken for rxip addresses, and this patch had no effect. Fixes: cb816192d986 ("s390/qeth: fix using of ref counter for rxip addresses") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

s390/qeth: fix double-free on IP add/remove race

2018-03-09T06:41:19Z

[ Upstream commit 14d066c3531a87f727968cacd85bd95c75f59843 ] Registering an IPv4 address with the HW takes quite a while, so we temporarily drop the ip_htable lock. Any concurrent add/remove of the same IP adjusts the IP's use count, and (on remove) is then blocked by addr->in_progress. After the register call has completed, we check the use count for concurrently attempted add/remove calls - and possibly straight-away deregister the IP again. This happens via l3_delete_ip(), which 1) looks up the queried IP in the htable (getting a reference to the *same* queried object), 2) deregisters the IP from the HW, and 3) frees the IP object. The caller in l3_add_ip() then does a second free on the same object. For this case, skip all the extra checks and lookups in l3_delete_ip() and just deregister & free the IP object ourselves. Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman