user/sven/linux.git/drivers, branch v4.15.11

drm/i915/glk: Disable Guc and HuC on GLK

2018-03-19T08:10:00Z

commit 2afba81c7909ac259720c0d3e7616cf54d4a5368 upstream. Since the firmwares are not yet released to public repo, disable them on Geminilake. v2: Remove the firmware versions (Michal) v3: Remove unwanted defines (Rodrigo) Correct commit message (Michal) Cc: Michal Wajdeczko Cc: Rodrigo Vivi Cc: Signed-off-by: Anusha Srivatsa Fixes: 90f192c8241e ("drm/i915/GuC/GLK: Load GuC on GLK") Fixes: db5ba0d8931e ("drm/i915/GLK/HuC: Load HuC on GLK") Reviewed-by: Michal Wajdeczko Signed-off-by: Rodrigo Vivi Link: https://patchwork.freedesktop.org/patch/msgid/1515006225-13003-1-git-send-email-anusha.srivatsa@intel.com (cherry picked from commit a76050a4837860fcadb6ca11d69d41e08f4090d8) Signed-off-by: Rodrigo Vivi Signed-off-by: Greg Kroah-Hartman

dmaengine: qcom_hidma: check pending interrupts

2018-03-19T08:10:00Z

[ Upstream commit 38680bc6b1e3592bc9e18adc1d6e259667df27ce ] Driver is missing the interrupts if two requests are queued up at the same time as the interrupt handler is servicing a request that was just delivered. The ISR clears the interrupt at the end but it could be clearing the interrupt for an outstanding event. Therefore, second interrupt never arrives. Clear the interrupt first and then check for completions. Also, make sure that request start and interrupt clear do not overlap in time by using a spinlock. Signed-off-by: Sinan Kaya Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

IB/mlx5: revisit -Wmaybe-uninitialized warning

2018-03-19T08:10:00Z

[ Upstream commit 1b19b95169cd52fe82cd442fec0b279fe25cc838 ] A warning that I thought I had fixed before occasionally comes back in rare randconfig builds (I found 7 instances in the last 100000 builds, originally it was much more frequent): drivers/infiniband/hw/mlx5/mr.c: In function 'mlx5_ib_reg_user_mr': drivers/infiniband/hw/mlx5/mr.c:1229:5: error: 'order' may be used uninitialized in this function [-Werror=maybe-uninitialized] if (order <= mr_cache_max_order(dev)) { ^ drivers/infiniband/hw/mlx5/mr.c:1247:8: error: 'ncont' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/infiniband/hw/mlx5/mr.c:1247:8: error: 'page_shift' may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/infiniband/hw/mlx5/mr.c:1260:2: error: 'npages' may be used uninitialized in this function [-Werror=maybe-uninitialized] I've looked at all those findings again and noticed that they are all with CONFIG_INFINIBAND_USER_MEM=n, which means ib_umem_get() returns an error unconditionally and we never initialize or use those variables. This triggers a condition in gcc iff mr_umem_get() is partially but not entirely inlined, which in turn depends on the exact combination of optimization settings. This is a known problem with gcc, with no easy solution in the compiler, so this adds another workaround that should be more reliable than my previous attempt. Returning an error from mlx5_ib_reg_user_mr() earlier means that we can completely bypass the logic that caused the warning, the compiler can now see that the variable is never accessed. Fixes: 14ab8896f5d9 ("IB/mlx5: avoid bogus -Wmaybe-uninitialized warning") Signed-off-by: Arnd Bergmann Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

ipvlan: add L2 check for packets arriving via virtual devices

2018-03-19T08:09:59Z

[ Upstream commit 92ff42645028fa6f9b8aa767718457b9264316b4 ] Packets that don't have dest mac as the mac of the master device should not be entertained by the IPvlan rx-handler. This is mostly true as the packet path mostly takes care of that, except when the master device is a virtual device. As demonstrated in the following case - ip netns add ns1 ip link add ve1 type veth peer name ve2 ip link add link ve2 name iv1 type ipvlan mode l2 ip link set dev iv1 netns ns1 ip link set ve1 up ip link set ve2 up ip -n ns1 link set iv1 up ip addr add 192.168.10.1/24 dev ve1 ip -n ns1 addr 192.168.10.2/24 dev iv1 ping -c2 192.168.10.2 ip neigh show dev ve1 ip neigh show 192.168.10.2 lladdr dev ve1 ping -c2 192.168.10.2 This patch adds that missing check in the IPvlan rx-handler. Reported-by: Amit Sikka Signed-off-by: Mahesh Bandewar Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mmc: mmc_test: Ensure command queue is disabled for testing

2018-03-19T08:09:59Z

[ Upstream commit 23a185254ace8e63dc4ca36e0315aed9440ae749 ] mmc_test disables the command queue because none of the tests use the command queue. However the Reset Test will re-enable it, so disable it in that case too. Fixes: 9d4579a85c84 ("mmc: mmc_test: Disable Command Queue while mmc_test is used") Signed-off-by: Adrian Hunter Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

crypto: caam/qi - use correct print specifier for size_t

2018-03-19T08:09:59Z

[ Upstream commit 9db09e3bad65393dc23b0279beb7f3754d77065c ] Fix below warnings on ARMv7 by using %zu for printing size_t values: drivers/crypto/caam/caamalg_qi.c: In function aead_edesc_alloc: drivers/crypto/caam/caamalg_qi.c:417:17: warning: format %lu expects argument of type long unsigned int, but argument 4 has type unsigned int [-Wformat=] sizeof(struct qm_sg_entry)) ^ drivers/crypto/caam/caamalg_qi.c:672:16: note: in expansion of macro CAAM_QI_MAX_AEAD_SG qm_sg_ents, CAAM_QI_MAX_AEAD_SG); ^ drivers/crypto/caam/caamalg_qi.c: In function ablkcipher_edesc_alloc: drivers/crypto/caam/caamalg_qi.c:440:17: warning: format %lu expects argument of type long unsigned int, but argument 4 has type unsigned int [-Wformat=] sizeof(struct qm_sg_entry)) ^ drivers/crypto/caam/caamalg_qi.c:909:16: note: in expansion of macro CAAM_QI_MAX_ABLKCIPHER_SG qm_sg_ents, CAAM_QI_MAX_ABLKCIPHER_SG); ^ drivers/crypto/caam/caamalg_qi.c: In function ablkcipher_giv_edesc_alloc: drivers/crypto/caam/caamalg_qi.c:440:17: warning: format %lu expects argument of type long unsigned int, but argument 4 has type unsigned int [-Wformat=] sizeof(struct qm_sg_entry)) ^ drivers/crypto/caam/caamalg_qi.c:1062:16: note: in expansion of macro CAAM_QI_MAX_ABLKCIPHER_SG qm_sg_ents, CAAM_QI_MAX_ABLKCIPHER_SG); ^ Fixes: eb9ba37dc15a ("crypto: caam/qi - handle large number of S/Gs case") Signed-off-by: Horia Geantă Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mac80211_hwsim: enforce PS_MANUAL_POLL to be set after PS_ENABLED

2018-03-19T08:09:59Z

[ Upstream commit e16ea4bb516bc21ea2202f2107718b29218bea59 ] Enforce using PS_MANUAL_POLL in ps hwsim debugfs to trigger a poll, only if PS_ENABLED was set before. This is required due to commit c9491367b759 ("mac80211: always update the PM state of a peer on MGMT / DATA frames") that enforces the ap to check only mgmt/data frames ps bit, and then update station's power save accordingly. When sending only ps-poll (control frame) the ap will not be aware that the station entered power save. Setting ps enable before triggering ps_poll, will send NDP with PM bit enabled first. Signed-off-by: Adiel Aloni Signed-off-by: Luca Coelho Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

agp/intel: Flush all chipset writes after updating the GGTT

2018-03-19T08:09:59Z

[ Upstream commit 8516673a996870ea0ceb337ee4f83c33c5ec3111 ] Before accessing the GGTT we must flush the PTE writes and make them visible to the chipset, or else the indirect access may end up in the wrong page. In commit 3497971a71d8 ("agp/intel: Flush chipset writes after updating a single PTE"), we noticed corruption of the uploads for pwrite and for capturing GPU error states, but it was presumed that the explicit calls to intel_gtt_chipset_flush() were sufficient for the execbuffer path. However, we have not been flushing the chipset between the PTE writes and access via the GTT itself. For simplicity, do the flush after any PTE update rather than try and batch the flushes on a just-in-time basis. References: 3497971a71d8 ("agp/intel: Flush chipset writes after updating a single PTE") Signed-off-by: Chris Wilson Cc: Tvrtko Ursulin Cc: Mika Kuoppala Cc: drm-intel-fixes@lists.freedesktop.org Reviewed-by: Joonas Lahtinen Link: https://patchwork.freedesktop.org/patch/msgid/20171208214616.30147-1-chris@chris-wilson.co.uk Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

drm/amdkfd: Fix memory leaks in kfd topology

2018-03-19T08:09:58Z

[ Upstream commit 5108d768408abc80e4e8d99f5b406a73cb04056b ] Kobject created using kobject_create_and_add() can be freed using kobject_put() when there is no referenece any more. However, kobject memory allocated with kzalloc() has to set up a release callback in order to free it when the counter decreases to 0. Otherwise it causes memory leak. Signed-off-by: Yong Zhao Signed-off-by: Felix Kuehling Reviewed-by: Oded Gabbay Signed-off-by: Oded Gabbay Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

veth: set peer GSO values

2018-03-19T08:09:58Z

[ Upstream commit 72d24955b44a4039db54a1c252b5031969eeaac3 ] When new veth is created, and GSO values have been configured on one device, clone those values to the peer. For example: # ip link add dev vm1 gso_max_size 65530 type veth peer name vm2 This should create vm1 <--> vm2 with both having GSO maximum size set to 65530. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman