user/sven/linux.git/drivers, branch v4.19.278

nfc: fdp: add null check of devm_kmalloc_array in fdp_nci_i2c_read_device_properties

2023-03-17T07:31:44Z

commit 11f180a5d62a51b484e9648f9b310e1bd50b1a57 upstream. devm_kmalloc_array may fails, *fw_vsc_cfg might be null and cause out-of-bounds write in device_property_read_u8_array later. Fixes: a06347c04c13 ("NFC: Add Intel Fields Peak NFC solution driver") Signed-off-by: Kang Chen Reviewed-by: Krzysztof Kozlowski Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20230227093037.907654-1-void0red@gmail.com Signed-off-by: Paolo Abeni Signed-off-by: Greg Kroah-Hartman

drm/i915: Don't use BAR mappings for ring buffers with LLC

2023-03-17T07:31:44Z

commit 85636167e3206c3fbd52254fc432991cc4e90194 upstream. Direction from hardware is that ring buffers should never be mapped via the BAR on systems with LLC. There are too many caching pitfalls due to the way BAR accesses are routed. So it is safest to just not use it. Signed-off-by: John Harrison Fixes: 9d80841ea4c9 ("drm/i915: Allow ringbuffers to be bound anywhere") Cc: Chris Wilson Cc: Joonas Lahtinen Cc: Jani Nikula Cc: Rodrigo Vivi Cc: Tvrtko Ursulin Cc: intel-gfx@lists.freedesktop.org Cc: # v4.9+ Tested-by: Jouni Högander Reviewed-by: Daniele Ceraolo Spurio Link: https://patchwork.freedesktop.org/patch/msgid/20230216011101.1909009-3-John.C.Harrison@Intel.com (cherry picked from commit 65c08339db1ada87afd6cfe7db8e60bb4851d919) Signed-off-by: Jani Nikula Signed-off-by: John Harrison Signed-off-by: Greg Kroah-Hartman

media: ov5640: Fix analogue gain control

2023-03-17T07:31:44Z

[ Upstream commit afa4805799c1d332980ad23339fdb07b5e0cf7e0 ] Gain control is badly documented in publicly available (including leaked) documentation. There is an AGC pre-gain in register 0x3a13, expressed as a 6-bit value (plus an enable bit in bit 6). The driver hardcodes it to 0x43, which one application note states is equal to x1.047. The documentation also states that 0x40 is equel to x1.000. The pre-gain thus seems to be expressed as in 1/64 increments, and thus ranges from x1.00 to x1.984. What the pre-gain does is however unspecified. There is then an AGC gain limit, in registers 0x3a18 and 0x3a19, expressed as a 10-bit "real gain format" value. One application note sets it to 0x00f8 and states it is equal to x15.5, so it appears to be expressed in 1/16 increments, up to x63.9375. The manual gain is stored in registers 0x350a and 0x350b, also as a 10-bit "real gain format" value. It is documented in the application note as a Q6.4 values, up to x63.9375. One version of the datasheet indicates that the sensor supports a digital gain: The OV5640 supports 1/2/4 digital gain. Normally, the gain is controlled automatically by the automatic gain control (AGC) block. It isn't clear how that would be controlled manually. There appears to be no indication regarding whether the gain controlled through registers 0x350a and 0x350b is an analogue gain only or also includes digital gain. The words "real gain" don't necessarily mean "combined analogue and digital gains". Some OmniVision sensors (such as the OV8858) are documented as supoprting different formats for the gain values, selectable through a register bit, and they are called "real gain format" and "sensor gain format". For that sensor, we have (one of) the gain registers documented as 0x3503[2]=0, gain[7:0] is real gain format, where low 4 bits are fraction bits, for example, 0x10 is 1x gain, 0x28 is 2.5x gain If 0x3503[2]=1, gain[7:0] is sensor gain format, gain[7:4] is coarse gain, 00000: 1x, 00001: 2x, 00011: 4x, 00111: 8x, gain[7] is 1, gain[3:0] is fine gain. For example, 0x10 is 1x gain, 0x30 is 2x gain, 0x70 is 4x gain (The second part of the text makes little sense) "Real gain" may thus refer to the combination of the coarse and fine analogue gains as a single value. The OV5640 0x350a and 0x350b registers thus appear to control analogue gain. The driver incorrectly uses V4L2_CID_GAIN as V4L2 has a specific control for analogue gain, V4L2_CID_ANALOGUE_GAIN. Use it. If registers 0x350a and 0x350b are later found to control digital gain as well, the driver could then restrict the range of the analogue gain control value to lower than x64 and add a separate digital gain control. Signed-off-by: Paul Elder Signed-off-by: Laurent Pinchart Reviewed-by: Jacopo Mondi Reviewed-by: Jai Luthra Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin

macintosh: windfarm: Use unsigned type for 1-bit bitfields

2023-03-17T07:31:43Z

[ Upstream commit 748ea32d2dbd813d3bd958117bde5191182f909a ] Clang warns: drivers/macintosh/windfarm_lm75_sensor.c:63:14: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion] lm->inited = 1; ^ ~ drivers/macintosh/windfarm_smu_sensors.c:356:19: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion] pow->fake_volts = 1; ^ ~ drivers/macintosh/windfarm_smu_sensors.c:368:18: error: implicit truncation from 'int' to a one-bit wide bit-field changes value from 1 to -1 [-Werror,-Wsingle-bit-bitfield-constant-conversion] pow->quadratic = 1; ^ ~ There is no bug here since no code checks the actual value of these fields, just whether or not they are zero (boolean context), but this can be easily fixed by switching to an unsigned type. Signed-off-by: Nathan Chancellor Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20230215-windfarm-wsingle-bit-bitfield-constant-conversion-v1-1-26415072e855@kernel.org Signed-off-by: Sasha Levin

Revert "spi: mt7621: Fix an error message in mt7621_spi_probe()"

2023-03-17T07:31:43Z

This reverts commit 269f650a0b26067092873308117e0bf0c6ec8289 which is commit 2b2bf6b7faa9010fae10dc7de76627a3fdb525b3 upstream. dev_err_probe() does not suppot in 4.19.y. So this driver will fail to build. ``` CC drivers/staging/mt7621-spi/spi-mt7621.o drivers/staging/mt7621-spi/spi-mt7621.c: In function 'mt7621_spi_probe': drivers/staging/mt7621-spi/spi-mt7621.c:446:24: error: implicit declaration of function 'dev_err_probe'; did you mean 'device_reprobe'? [-Werror=implicit-function-declaration] 446 | return dev_err_probe(&pdev->dev, PTR_ERR(clk), | ^~~~~~~~~~~~~ | device_reprobe ``` Signed-off-by: Nobuhiro Iwamatsu (CIP) Signed-off-by: Greg Kroah-Hartman

scsi: core: Remove the /proc/scsi/${proc_name} directory earlier

2023-03-17T07:31:43Z

[ Upstream commit fc663711b94468f4e1427ebe289c9f05669699c9 ] Remove the /proc/scsi/${proc_name} directory earlier to fix a race condition between unloading and reloading kernel modules. This fixes a bug introduced in 2009 by commit 77c019768f06 ("[SCSI] fix /proc memory leak in the SCSI core"). Fix the following kernel warning: proc_dir_entry 'scsi/scsi_debug' already registered WARNING: CPU: 19 PID: 27986 at fs/proc/generic.c:376 proc_register+0x27d/0x2e0 Call Trace: proc_mkdir+0xb5/0xe0 scsi_proc_hostdir_add+0xb5/0x170 scsi_host_alloc+0x683/0x6c0 sdebug_driver_probe+0x6b/0x2d0 [scsi_debug] really_probe+0x159/0x540 __driver_probe_device+0xdc/0x230 driver_probe_device+0x4f/0x120 __device_attach_driver+0xef/0x180 bus_for_each_drv+0xe5/0x130 __device_attach+0x127/0x290 device_initial_probe+0x17/0x20 bus_probe_device+0x110/0x130 device_add+0x673/0xc80 device_register+0x1e/0x30 sdebug_add_host_helper+0x1a7/0x3b0 [scsi_debug] scsi_debug_init+0x64f/0x1000 [scsi_debug] do_one_initcall+0xd7/0x470 do_init_module+0xe7/0x330 load_module+0x122a/0x12c0 __do_sys_finit_module+0x124/0x1a0 __x64_sys_finit_module+0x46/0x50 do_syscall_64+0x38/0x80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 Link: https://lore.kernel.org/r/20230210205200.36973-3-bvanassche@acm.org Cc: Alan Stern Cc: Yi Zhang Cc: stable@vger.kernel.org Fixes: 77c019768f06 ("[SCSI] fix /proc memory leak in the SCSI core") Reported-by: Yi Zhang Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

staging: rtl8192e: Remove call_usermodehelper starting RadioPower.sh

2023-03-13T09:17:16Z

commit fe413a074a93d56f89e322c786aad8639afe76b4 upstream. Remove call_usermodehelper starting /etc/acpi/events/RadioPower.sh that is not available. This script is not part of the kernel and it is not officially available on the www. The result is that this lines are just dead code. Signed-off-by: Philipp Hortmann Cc: stable Link: https://lore.kernel.org/r/20230301215441.GA14049@matrix-ESPRIMO-P710 Signed-off-by: Greg Kroah-Hartman

staging: rtl8192e: Remove function ..dm_check_ac_dc_power calling a script

2023-03-13T09:17:15Z

commit a98fc23cc2c1e4382a79ff137ca1a93d6a73b451 upstream. Remove function _rtl92e_dm_check_ac_dc_power calling a script /etc/acpi/wireless-rtl-ac-dc-power.sh that is not available. This script is not part of the kernel and it is not available on the www. The result is that this function is just dead code. Signed-off-by: Philipp Hortmann Cc: stable Link: https://lore.kernel.org/r/20230228202857.GA16442@matrix-ESPRIMO-P710 Signed-off-by: Greg Kroah-Hartman

thermal: intel: powerclamp: Fix cur_state for multi package system

2023-03-11T15:32:02Z

commit 8e47363588377e1bdb65e2b020b409cfb44dd260 upstream. The powerclamp cooling device cur_state shows actual idle observed by package C-state idle counters. But the implementation is not sufficient for multi package or multi die system. The cur_state value is incorrect. On these systems, these counters must be read from each package/die and somehow aggregate them. But there is no good method for aggregation. It was not a problem when explicit CPU model addition was required to enable intel powerclamp. In this way certain CPU models could have been avoided. But with the removal of CPU model check with the availability of Package C-state counters, the driver is loaded on most of the recent systems. For multi package/die systems, just show the actual target idle state, the system is trying to achieve. In powerclamp this is the user set state minus one. Also there is no use of starting a worker thread for polling package C-state counters and applying any compensation for multiple package or multiple die systems. Fixes: b721ca0d1927 ("thermal/powerclamp: remove cpu whitelist") Signed-off-by: Srinivas Pandruvada Cc: 4.14+ # 4.14+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

media: uvcvideo: Fix race condition with usb_kill_urb

2023-03-11T15:32:02Z

commit 619d9b710cf06f7a00a17120ca92333684ac45a8 upstream. usb_kill_urb warranties that all the handlers are finished when it returns, but does not protect against threads that might be handling asynchronously the urb. For UVC, the function uvc_ctrl_status_event_async() takes care of control changes asynchronously. If the code is executed in the following order: CPU 0 CPU 1 ===== ===== uvc_status_complete() uvc_status_stop() uvc_ctrl_status_event_work() uvc_status_start() -> FAIL Then uvc_status_start will keep failing and this error will be shown: <4>[ 5.540139] URB 0000000000000000 submitted while active drivers/usb/core/urb.c:378 usb_submit_urb+0x4c3/0x528 Let's improve the current situation, by not re-submiting the urb if we are stopping the status event. Also process the queued work (if any) during stop. CPU 0 CPU 1 ===== ===== uvc_status_complete() uvc_status_stop() uvc_status_start() uvc_ctrl_status_event_work() -> FAIL Hopefully, with the usb layer protection this should be enough to cover all the cases. Cc: stable@vger.kernel.org Fixes: e5225c820c05 ("media: uvcvideo: Send a control event when a Control Change interrupt arrives") Reviewed-by: Yunke Cao Signed-off-by: Ricardo Ribalda Reviewed-by: Laurent Pinchart Signed-off-by: Laurent Pinchart Signed-off-by: Greg Kroah-Hartman