user/sven/linux.git/drivers, branch v4.4.2

HID: multitouch: fix input mode switching on some Elan panels

2016-02-17T20:31:06Z

commit 73e7d63efb4d774883a338997943bfa59e127085 upstream. as reported by https://bugzilla.kernel.org/show_bug.cgi?id=108481 This bug reports mentions 6d4f5440 ("HID: multitouch: Fetch feature reports on demand for Win8 devices") as the origin of the problem but this commit actually masked 2 firmware bugs that are annihilating each other: The report descriptor declares two features in reports 3 and 5: 0x05, 0x0d, // Usage Page (Digitizers) 318 0x09, 0x0e, // Usage (Device Configuration) 320 0xa1, 0x01, // Collection (Application) 322 0x85, 0x03, // Report ID (3) 324 0x09, 0x22, // Usage (Finger) 326 0xa1, 0x00, // Collection (Physical) 328 0x09, 0x52, // Usage (Inputmode) 330 0x15, 0x00, // Logical Minimum (0) 332 0x25, 0x0a, // Logical Maximum (10) 334 0x75, 0x08, // Report Size (8) 336 0x95, 0x02, // Report Count (2) 338 0xb1, 0x02, // Feature (Data,Var,Abs) 340 0xc0, // End Collection 342 0x09, 0x22, // Usage (Finger) 343 0xa1, 0x00, // Collection (Physical) 345 0x85, 0x05, // Report ID (5) 347 0x09, 0x57, // Usage (Surface Switch) 349 0x09, 0x58, // Usage (Button Switch) 351 0x15, 0x00, // Logical Minimum (0) 353 0x75, 0x01, // Report Size (1) 355 0x95, 0x02, // Report Count (2) 357 0x25, 0x03, // Logical Maximum (3) 359 0xb1, 0x02, // Feature (Data,Var,Abs) 361 0x95, 0x0e, // Report Count (14) 363 0xb1, 0x03, // Feature (Cnst,Var,Abs) 365 0xc0, // End Collection 367 The report ID 3 presents 2 input mode features, while only the first one is handled by the device. Given that we did not checked if one was previously assigned, we were dealing with the ignored featured and we should never have been able to switch this panel into the multitouch mode. However, the firmware presents an other bugs which allowed 6d4f5440 to counteract the faulty report descriptor. When we request the values of the feature 5, the firmware answers "03 03 00". The fields are correct but the report id is wrong. Before 6d4f5440, we retrieved all the features and injected them in the system. So when we called report 5, we injected in the system the report 3 with the values "03 00". Setting the second input mode to 03 in this report changed it to "03 03" and the touchpad switched to the mt mode. We could have set anything in the second field because the actual value (the first 03 in this report) was given by the query of report ID 5. To sum up: 2 bugs in the firmware were hiding that we were accessing the wrong feature. Signed-off-by: Benjamin Tissoires Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman

zram: don't call idr_remove() from zram_remove()

2016-02-17T20:31:06Z

commit 17ec4cd985780a7e30aa45bb8f272237c12502a4 upstream. The use of idr_remove() is forbidden in the callback functions of idr_for_each(). It is therefore unsafe to call idr_remove in zram_remove(). This patch moves the call to idr_remove() from zram_remove() to hot_remove_store(). In the detroy_devices() path, idrs are removed by idr_destroy(). This solves an use-after-free detected by KASan. [akpm@linux-foundation.org: fix coding stype, per Sergey] Signed-off-by: Jerome Marchand Acked-by: Sergey Senozhatsky Cc: Minchan Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

zram: try vmalloc() after kmalloc()

2016-02-17T20:31:05Z

commit d913897abace843bba20249f3190167f7895e9c3 upstream. When we're using LZ4 multi compression streams for zram swap, we found out page allocation failure message in system running test. That was not only once, but a few(2 - 5 times per test). Also, some failure cases were continually occurring to try allocation order 3. In order to make parallel compression private data, we should call kzalloc() with order 2/3 in runtime(lzo/lz4). But if there is no order 2/3 size memory to allocate in that time, page allocation fails. This patch makes to use vmalloc() as fallback of kmalloc(), this prevents page alloc failure warning. After using this, we never found warning message in running test, also It could reduce process startup latency about 60-120ms in each case. For reference a call trace : Binder_1: page allocation failure: order:3, mode:0x10c0d0 CPU: 0 PID: 424 Comm: Binder_1 Tainted: GW 3.10.49-perf-g991d02b-dirty #20 Call trace: dump_backtrace+0x0/0x270 show_stack+0x10/0x1c dump_stack+0x1c/0x28 warn_alloc_failed+0xfc/0x11c __alloc_pages_nodemask+0x724/0x7f0 __get_free_pages+0x14/0x5c kmalloc_order_trace+0x38/0xd8 zcomp_lz4_create+0x2c/0x38 zcomp_strm_alloc+0x34/0x78 zcomp_strm_multi_find+0x124/0x1ec zcomp_strm_find+0xc/0x18 zram_bvec_rw+0x2fc/0x780 zram_make_request+0x25c/0x2d4 generic_make_request+0x80/0xbc submit_bio+0xa4/0x15c __swap_writepage+0x218/0x230 swap_writepage+0x3c/0x4c shrink_page_list+0x51c/0x8d0 shrink_inactive_list+0x3f8/0x60c shrink_lruvec+0x33c/0x4cc shrink_zone+0x3c/0x100 try_to_free_pages+0x2b8/0x54c __alloc_pages_nodemask+0x514/0x7f0 __get_free_pages+0x14/0x5c proc_info_read+0x50/0xe4 vfs_read+0xa0/0x12c SyS_read+0x44/0x74 DMA: 3397*4kB (MC) 26*8kB (RC) 0*16kB 0*32kB 0*64kB 0*128kB 0*256kB 0*512kB 0*1024kB 0*2048kB 0*4096kB = 13796kB [minchan@kernel.org: change vmalloc gfp and adding comment about gfp] [sergey.senozhatsky@gmail.com: tweak comments and styles] Signed-off-by: Kyeongdon Kim Signed-off-by: Minchan Kim Acked-by: Sergey Senozhatsky Sergey Senozhatsky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

zram/zcomp: use GFP_NOIO to allocate streams

2016-02-17T20:31:05Z

commit 3d5fe03a3ea013060ebba2a811aeb0f23f56aefa upstream. We can end up allocating a new compression stream with GFP_KERNEL from within the IO path, which may result is nested (recursive) IO operations. That can introduce problems if the IO path in question is a reclaimer, holding some locks that will deadlock nested IOs. Allocate streams and working memory using GFP_NOIO flag, forbidding recursive IO and FS operations. An example: inconsistent {IN-RECLAIM_FS-W} -> {RECLAIM_FS-ON-W} usage. git/20158 [HC0[0]:SC0[0]:HE1:SE1] takes: (jbd2_handle){+.+.?.}, at: start_this_handle+0x4ca/0x555 {IN-RECLAIM_FS-W} state was registered at: __lock_acquire+0x8da/0x117b lock_acquire+0x10c/0x1a7 start_this_handle+0x52d/0x555 jbd2__journal_start+0xb4/0x237 __ext4_journal_start_sb+0x108/0x17e ext4_dirty_inode+0x32/0x61 __mark_inode_dirty+0x16b/0x60c iput+0x11e/0x274 __dentry_kill+0x148/0x1b8 shrink_dentry_list+0x274/0x44a prune_dcache_sb+0x4a/0x55 super_cache_scan+0xfc/0x176 shrink_slab.part.14.constprop.25+0x2a2/0x4d3 shrink_zone+0x74/0x140 kswapd+0x6b7/0x930 kthread+0x107/0x10f ret_from_fork+0x3f/0x70 irq event stamp: 138297 hardirqs last enabled at (138297): debug_check_no_locks_freed+0x113/0x12f hardirqs last disabled at (138296): debug_check_no_locks_freed+0x33/0x12f softirqs last enabled at (137818): __do_softirq+0x2d3/0x3e9 softirqs last disabled at (137813): irq_exit+0x41/0x95 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(jbd2_handle); lock(jbd2_handle); *** DEADLOCK *** 5 locks held by git/20158: #0: (sb_writers#7){.+.+.+}, at: [] mnt_want_write+0x24/0x4b #1: (&type->i_mutex_dir_key#2/1){+.+.+.}, at: [] lock_rename+0xd9/0xe3 #2: (&sb->s_type->i_mutex_key#11){+.+.+.}, at: [] lock_two_nondirectories+0x3f/0x6b #3: (&sb->s_type->i_mutex_key#11/4){+.+.+.}, at: [] lock_two_nondirectories+0x66/0x6b #4: (jbd2_handle){+.+.?.}, at: [] start_this_handle+0x4ca/0x555 stack backtrace: CPU: 2 PID: 20158 Comm: git Not tainted 4.1.0-rc7-next-20150615-dbg-00016-g8bdf555-dirty #211 Call Trace: dump_stack+0x4c/0x6e mark_lock+0x384/0x56d mark_held_locks+0x5f/0x76 lockdep_trace_alloc+0xb2/0xb5 kmem_cache_alloc_trace+0x32/0x1e2 zcomp_strm_alloc+0x25/0x73 [zram] zcomp_strm_multi_find+0xe7/0x173 [zram] zcomp_strm_find+0xc/0xe [zram] zram_bvec_rw+0x2ca/0x7e0 [zram] zram_make_request+0x1fa/0x301 [zram] generic_make_request+0x9c/0xdb submit_bio+0xf7/0x120 ext4_io_submit+0x2e/0x43 ext4_bio_write_page+0x1b7/0x300 mpage_submit_page+0x60/0x77 mpage_map_and_submit_buffers+0x10f/0x21d ext4_writepages+0xc8c/0xe1b do_writepages+0x23/0x2c __filemap_fdatawrite_range+0x84/0x8b filemap_flush+0x1c/0x1e ext4_alloc_da_blocks+0xb8/0x117 ext4_rename+0x132/0x6dc ? mark_held_locks+0x5f/0x76 ext4_rename2+0x29/0x2b vfs_rename+0x540/0x636 SyS_renameat2+0x359/0x44d SyS_rename+0x1e/0x20 entry_SYSCALL_64_fastpath+0x12/0x6f [minchan@kernel.org: add stable mark] Signed-off-by: Sergey Senozhatsky Acked-by: Minchan Kim Cc: Kyeongdon Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

rtlwifi: rtl8821ae: Fix 5G failure when EEPROM is incorrectly encoded

2016-02-17T20:31:05Z

commit c72fc9093718a3f8597249863a1bac345ba00859 upstream. Recently, it has been reported that D-Link DWA-582 cards, which use an RTL8812AE chip are not able to scan for 5G networks. The problems started with kernel 4.2, which is the first version that had commit d10101a60372 ("rtlwifi: rtl8821ae: Fix problem with regulatory information"). With this patch, the driver went from setting a default channel plan to using the value derived from EEPROM. Bug reports at https://bugzilla.kernel.org/show_bug.cgi?id=111031 and https://bugzilla.redhat.com/show_bug.cgi?id=1279653 are examples of this problem. The problem was solved once I learned that the internal country code was resulting in a regulatory set with only 2.4 GHz channels. With the RTL8821AE chips available to me, the country code was such that both 2.4 and 5 GHz channels are allowed. The fix is to allow both bands even when the EEPROM is incorrectly encoded. Fixes: d10101a60372 ("rtlwifi: rtl8821ae: Fix problem with regulatory information") Signed-off-by: Larry Finger Cc: littlesmartguy@gmail.com Cc: gabe@codehaus.org Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

rtlwifi: rtl8821ae: Fix errors in parameter initialization

2016-02-17T20:31:05Z

commit 78bae1de422a7f6f2b4b61f6a5c379e3d7f96f44 upstream. This driver failed to copy parameters sw_crypto and disable_watchdog into the locations actually used by the driver. In addition, msi_support was initialized three times and one of them used the wrong variable. The initialization of parameter int_clear was moved so that it is near that of the rest of the parameters. Signed-off-by: Larry Finger Signed-off-by: Kalle Valo Signed-off-by: Greg Kroah-Hartman

crypto: marvell/cesa - fix test in mv_cesa_dev_dma_init()

2016-02-17T20:31:05Z

commit 8a3978ad55fb4c0564d285fb2f6cdee2313fce01 upstream. We are checking twice if dma->cache_pool is not NULL but are never testing dma->padding_pool value. Signed-off-by: Boris Brezillon Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

crypto: atmel-sha - remove calls of clk_prepare() from atomic contexts

2016-02-17T20:31:05Z

commit c033042aa8f69894df37dabcaa0231594834a4e4 upstream. clk_prepare()/clk_unprepare() must not be called within atomic context. This patch calls clk_prepare() once for all from atmel_sha_probe() and clk_unprepare() from atmel_sha_remove(). Then calls of clk_prepare_enable()/clk_disable_unprepare() were replaced by calls of clk_enable()/clk_disable(). Signed-off-by: Cyrille Pitchen Reported-by: Matthias Mayr Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

crypto: atmel-sha - fix atmel_sha_remove()

2016-02-17T20:31:05Z

commit d961436c11482e974b702c8324426208f00cd7c4 upstream. Since atmel_sha_probe() uses devm_xxx functions to allocate resources, atmel_sha_remove() should no longer explicitly release them. Signed-off-by: Cyrille Pitchen Fixes: b0e8b3417a62 ("crypto: atmel - use devm_xxx() managed function") Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman

crypto: caam - make write transactions bufferable on PPC platforms

2016-02-17T20:31:04Z

commit e7a7104e432c0db8469ca3568daf4f1d1afe3e73 upstream. Previous change (see "Fixes" tag) to the MCFGR register clears AWCACHE[0] ("bufferable" AXI3 attribute) (which is "1" at POR). This makes all writes non-bufferable, causing a ~ 5% performance drop for PPC-based platforms. Rework previous change such that MCFGR[AWCACHE]=4'b0011 (bufferable + cacheable) for all platforms. Note: For ARM-based platforms, AWCACHE[0] is ignored by the interconnect IP. Fixes: f10967495144 ("crypto: caam - fix snooping for write transactions") Signed-off-by: Horia Geant? Signed-off-by: Herbert Xu Signed-off-by: Greg Kroah-Hartman