user/sven/linux.git/drivers, branch v4.9.243

powercap: restrict energy meter to root access

2020-11-10T20:04:57Z

commit 949dd0104c496fa7c14991a23c03c62e44637e71 upstream. Remove non-privileged user access to power data contained in /sys/class/powercap/intel-rapl*/*/energy_uj Non-privileged users currently have read access to power data and can use this data to form a security attack. Some privileged drivers/applications need read access to this data, but don't expose it to non-privileged users. For example, thermald uses this data to ensure that power management works correctly. Thus removing non-privileged access is preferred over completely disabling this power reporting capability with CONFIG_INTEL_RAPL=n. Fixes: 95677a9a3847 ("PowerCap: Fix mode for energy counter") Signed-off-by: Len Brown Cc: stable@vger.kernel.org Signed-off-by: Greg Kroah-Hartman

USB: Add NO_LPM quirk for Kingston flash drive

2020-11-10T09:24:04Z

commit afaa2e745a246c5ab95103a65b1ed00101e1bc63 upstream. In Bugzilla #208257, Julien Humbert reports that a 32-GB Kingston flash drive spontaneously disconnects and reconnects, over and over. Testing revealed that disabling Link Power Management for the drive fixed the problem. This patch adds a quirk entry for that drive to turn off LPM permanently. CC: Hans de Goede CC: Reported-and-tested-by: Julien Humbert Signed-off-by: Alan Stern Link: https://lore.kernel.org/r/20201102145821.GA1478741@rowland.harvard.edu Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add Telit FN980 composition 0x1055

2020-11-10T09:24:04Z

commit db0362eeb22992502764e825c79b922d7467e0eb upstream. Add the following Telit FN980 composition: 0x1055: tty, adb, tty, tty, tty, tty Signed-off-by: Daniele Palmas Link: https://lore.kernel.org/r/20201103124425.12940-1-dnlplm@gmail.com Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231

2020-11-10T09:24:04Z

commit 489979b4aab490b6b917c11dc02d81b4b742784a upstream. Add following Telit LE910Cx compositions: 0x1203: rndis, tty, adb, tty, tty, tty, tty 0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty 0x1231: rndis, tty, adb, audio, tty, tty, tty, tty Signed-off-by: Daniele Palmas Link: https://lore.kernel.org/r/20201031225458.10512-1-dnlplm@gmail.com [ johan: add comments after entries ] Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

USB: serial: cyberjack: fix write-URB completion race

2020-11-10T09:24:04Z

commit 985616f0457d9f555fff417d0da56174f70cc14f upstream. The write-URB busy flag was being cleared before the completion handler was done with the URB, something which could lead to corrupt transfers due to a racing write request if the URB is resubmitted. Fixes: 507ca9bc0476 ("[PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.") Cc: stable # 2.6.13 Reviewed-by: Greg Kroah-Hartman Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman

serial: txx9: add missing platform_driver_unregister() on error in serial_txx9_init

2020-11-10T09:24:03Z

commit 0c5fc92622ed5531ff324b20f014e9e3092f0187 upstream. Add the missing platform_driver_unregister() before return from serial_txx9_init in the error handling case when failed to register serial_txx9_pci_driver with macro ENABLE_SERIAL_TXX9_PCI defined. Fixes: ab4382d27412 ("tty: move drivers/serial/ to drivers/tty/serial/") Signed-off-by: Qinglang Miao Link: https://lore.kernel.org/r/20201103084942.109076-1-miaoqinglang@huawei.com Cc: stable Signed-off-by: Greg Kroah-Hartman

serial: 8250_mtk: Fix uart_get_baud_rate warning

2020-11-10T09:24:03Z

commit 912ab37c798770f21b182d656937072b58553378 upstream. Mediatek 8250 port supports speed higher than uartclk / 16. If the baud rates in both the new and the old termios setting are higher than uartclk / 16, the WARN_ON in uart_get_baud_rate() will be triggered. Passing NULL as the old termios so uart_get_baud_rate() will use uartclk / 16 - 1 as the new baud rate which will be replaced by the original baud rate later by tty_termios_encode_baud_rate() in mtk8250_set_termios(). Fixes: 551e553f0d4a ("serial: 8250_mtk: Fix high-speed baud rates clamping") Signed-off-by: Claire Chang Link: https://lore.kernel.org/r/20201102120749.374458-1-tientzu@chromium.org Cc: stable Signed-off-by: Greg Kroah-Hartman

vt: Disable KD_FONT_OP_COPY

2020-11-10T09:24:03Z

commit 3c4e0dff2095c579b142d5a0693257f1c58b4804 upstream. It's buggy: On Fri, Nov 06, 2020 at 10:30:08PM +0800, Minh Yuan wrote: > We recently discovered a slab-out-of-bounds read in fbcon in the latest > kernel ( v5.10-rc2 for now ). The root cause of this vulnerability is that > "fbcon_do_set_font" did not handle "vc->vc_font.data" and > "vc->vc_font.height" correctly, and the patch > for VT_RESIZEX can't handle this > issue. > > Specifically, we use KD_FONT_OP_SET to set a small font.data for tty6, and > use KD_FONT_OP_SET again to set a large font.height for tty1. After that, > we use KD_FONT_OP_COPY to assign tty6's vc_font.data to tty1's vc_font.data > in "fbcon_do_set_font", while tty1 retains the original larger > height. Obviously, this will cause an out-of-bounds read, because we can > access a smaller vc_font.data with a larger vc_font.height. Further there was only one user ever. - Android's loadfont, busybox and console-tools only ever use OP_GET and OP_SET - fbset documentation only mentions the kernel cmdline font: option, not anything else. - systemd used OP_COPY before release 232 published in Nov 2016 Now unfortunately the crucial report seems to have gone down with gmane, and the commit message doesn't say much. But the pull request hints at OP_COPY being broken https://github.com/systemd/systemd/pull/3651 So in other words, this never worked, and the only project which foolishly every tried to use it, realized that rather quickly too. Instead of trying to fix security issues here on dead code by adding missing checks, fix the entire thing by removing the functionality. Note that systemd code using the OP_COPY function ignored the return value, so it doesn't matter what we're doing here really - just in case a lone server somewhere happens to be extremely unlucky and running an affected old version of systemd. The relevant code from font_copy_to_all_vcs() in systemd was: /* copy font from active VT, where the font was uploaded to */ cfo.op = KD_FONT_OP_COPY; cfo.height = vcs.v_active-1; /* tty1 == index 0 */ (void) ioctl(vcfd, KDFONTOP, &cfo); Note this just disables the ioctl, garbage collecting the now unused callbacks is left for -next. v2: Tetsuo found the old mail, which allowed me to find it on another archive. Add the link too. Acked-by: Peilin Ye Reported-by: Minh Yuan References: https://lists.freedesktop.org/archives/systemd-devel/2016-June/036935.html References: https://github.com/systemd/systemd/pull/3651 Cc: Greg KH Cc: Peilin Ye Cc: Tetsuo Handa Signed-off-by: Daniel Vetter Link: https://lore.kernel.org/r/20201108153806.3140315-1-daniel.vetter@ffwll.ch Signed-off-by: Greg Kroah-Hartman

ACPI: NFIT: Fix comparison to '-ENXIO'

2020-11-10T09:24:03Z

[ Upstream commit 85f971b65a692b68181438e099b946cc06ed499b ] Initial value of rc is '-ENXIO', and we should use the initial value to check it. Signed-off-by: Zhang Qilong Reviewed-by: Pankaj Gupta Reviewed-by: Vishal Verma [ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

scsi: core: Don't start concurrent async scan on same host

2020-11-10T09:24:03Z

[ Upstream commit 831e3405c2a344018a18fcc2665acc5a38c3a707 ] The current scanning mechanism is supposed to fall back to a synchronous host scan if an asynchronous scan is in progress. However, this rule isn't strictly respected, scsi_prep_async_scan() doesn't hold scan_mutex when checking shost->async_scan. When scsi_scan_host() is called concurrently, two async scans on same host can be started and a hang in do_scan_async() is observed. Fixes this issue by checking & setting shost->async_scan atomically with shost->scan_mutex. Link: https://lore.kernel.org/r/20201010032539.426615-1-ming.lei@redhat.com Cc: Christoph Hellwig Cc: Ewan D. Milne Cc: Hannes Reinecke Cc: Bart Van Assche Reviewed-by: Lee Duncan Reviewed-by: Bart Van Assche Signed-off-by: Ming Lei Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin