user/sven/linux.git/drivers, branch v5.15.57

intel_idle: Disable IBRS during long idle

2022-07-23T10:54:04Z

commit bf5835bcdb9635c97f85120dba9bfa21e111130f upstream. Having IBRS enabled while the SMT sibling is idle unnecessarily slows down the running sibling. OTOH, disabling IBRS around idle takes two MSR writes, which will increase the idle latency. Therefore, only disable IBRS around deeper idle states. Shallow idle states are bounded by the tick in duration, since NOHZ is not allowed for them by virtue of their short target residency. Only do this for mwait-driven idle, since that keeps interrupts disabled across idle, which makes disabling IBRS vs IRQ-entry a non-issue. Note: C6 is a random threshold, most importantly C1 probably shouldn't disable IBRS, benchmarking needed. Suggested-by: Tim Chen Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Reviewed-by: Josh Poimboeuf Signed-off-by: Borislav Petkov [cascardo: no CPUIDLE_FLAG_IRQ_ENABLE] Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Greg Kroah-Hartman

x86/bugs: Report AMD retbleed vulnerability

2022-07-23T10:54:02Z

commit 6b80b59b3555706508008f1f127b5412c89c7fd8 upstream. Report that AMD x86 CPUs are vulnerable to the RETBleed (Arbitrary Speculative Code Execution with Return Instructions) attack. [peterz: add hygon] [kim: invert parity; fam15h] Co-developed-by: Kim Phillips Signed-off-by: Kim Phillips Signed-off-by: Alexandre Chartre Signed-off-by: Peter Zijlstra (Intel) Signed-off-by: Borislav Petkov Reviewed-by: Josh Poimboeuf Signed-off-by: Borislav Petkov Signed-off-by: Thadeu Lima de Souza Cascardo Signed-off-by: Greg Kroah-Hartman

drm/aperture: Run fbdev removal before internal helpers

2022-07-21T19:24:44Z

commit bf43e4521ff3223a613f3a496991a22a4d78e04b upstream. Always run fbdev removal first to remove simpledrm via sysfb_disable(). This clears the internal state. The later call to drm_aperture_detach_drivers() then does nothing. Otherwise, with drm_aperture_detach_drivers() running first, the call to sysfb_disable() uses inconsistent state. Example backtrace show below: [ 11.663422] ================================================================== [ 11.663426] BUG: KASAN: use-after-free in device_del+0x79/0x5f0 [ 11.663435] Read of size 8 at addr ffff888108185050 by task systemd-udevd/311 [ 11.663440] CPU: 0 PID: 311 Comm: systemd-udevd Tainted: G E 5 .19.0-rc2-1-default+ #1689 [ 11.663445] Hardware name: HP ProLiant DL120 G7, BIOS J01 04/21/2011 [ 11.663447] Call Trace: [ 11.663449] [ 11.663451] ? device_del+0x79/0x5f0 [ 11.663456] dump_stack_lvl+0x5b/0x73 [ 11.663462] print_address_description.constprop.0+0x1f/0x1b0 [ 11.663468] ? device_del+0x79/0x5f0 [ 11.663471] ? device_del+0x79/0x5f0 [ 11.663475] print_report.cold+0x3c/0x21c [ 11.663481] ? lock_acquired+0x87/0x1e0 [ 11.663484] ? lock_acquired+0x87/0x1e0 [ 11.663489] ? device_del+0x79/0x5f0 [ 11.663492] kasan_report+0xbf/0xf0 [ 11.663498] ? device_del+0x79/0x5f0 [ 11.663503] device_del+0x79/0x5f0 [ 11.663509] ? device_remove_attrs+0x170/0x170 [ 11.663514] ? lock_is_held_type+0xe8/0x140 [ 11.663523] platform_device_del.part.0+0x19/0xe0 [ 11.663530] platform_device_unregister+0x1c/0x30 [ 11.663535] sysfb_disable+0x2d/0x70 [ 11.663540] remove_conflicting_framebuffers+0x1c/0xf0 [ 11.663546] remove_conflicting_pci_framebuffers+0x130/0x1a0 [ 11.663554] drm_aperture_remove_conflicting_pci_framebuffers+0x86/0xb0 [ 11.663561] ? mgag200_pci_remove+0x30/0x30 [mgag200] [ 11.663578] mgag200_pci_probe+0x2d/0x140 [mgag200] Reported-by: Zack Rusin Signed-off-by: Thomas Zimmermann Reviewed-by: Javier Martinez Canillas Reviewed-by: Zack Rusin Fixes: ee7a69aa38d8 ("fbdev: Disable sysfb device registration when removing conflicting FBs") Cc: Javier Martinez Canillas Cc: Daniel Vetter Cc: Daniel Vetter Cc: Sam Ravnborg Cc: Helge Deller Cc: Thomas Zimmermann Cc: Alex Deucher Cc: Zhen Lei Cc: Changcheng Deng Link: https://patchwork.freedesktop.org/patch/msgid/20220617121027.30273-1-tzimmermann@suse.de (cherry picked from commit fb84efa28a48e30b87fa1122e8aab8016c7347cd) Signed-off-by: Thomas Zimmermann Signed-off-by: Greg Kroah-Hartman

serial: 8250: Fix PM usage_count for console handover

2022-07-21T19:24:43Z

commit f9b11229b79c0fb2100b5bb4628a101b1d37fbf6 upstream. When console is enabled, univ8250_console_setup() calls serial8250_console_setup() before .dev is set to uart_port. Therefore, it will not call pm_runtime_get_sync(). Later, when the actual driver is going to take over univ8250_console_exit() is called. As .dev is already set, serial8250_console_exit() makes pm_runtime_put_sync() call with usage count being zero triggering PM usage count warning (extra debug for univ8250_console_setup(), univ8250_console_exit(), and serial8250_register_ports()): [ 0.068987] univ8250_console_setup ttyS0 nodev [ 0.499670] printk: console [ttyS0] enabled [ 0.717955] printk: console [ttyS0] printing thread started [ 1.960163] serial8250_register_ports assigned dev for ttyS0 [ 1.976830] printk: console [ttyS0] disabled [ 1.976888] printk: console [ttyS0] printing thread stopped [ 1.977073] univ8250_console_exit ttyS0 usage:0 [ 1.977075] serial8250 serial8250: Runtime PM usage count underflow! [ 1.977429] dw-apb-uart.6: ttyS0 at MMIO 0x4010006000 (irq = 33, base_baud = 115200) is a 16550A [ 1.977812] univ8250_console_setup ttyS0 usage:2 [ 1.978167] printk: console [ttyS0] printing thread started [ 1.978203] printk: console [ttyS0] enabled To fix the issue, call pm_runtime_get_sync() in serial8250_register_ports() as soon as .dev is set for an uart_port if it has console enabled. This problem became apparent only recently because 82586a721595 ("PM: runtime: Avoid device usage count underflows") added the warning printout. I confirmed this problem also occurs with v5.18 (w/o the warning printout, obviously). Fixes: bedb404e91bb ("serial: 8250_port: Don't use power management for kernel console") Cc: stable Tested-by: Tony Lindgren Reviewed-by: Andy Shevchenko Reviewed-by: Tony Lindgren Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/b4f428e9-491f-daf2-2232-819928dc276e@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: pl011: UPSTAT_AUTORTS requires .throttle/unthrottle

2022-07-21T19:24:43Z

commit 211565b100993c90b53bf40851eacaefc830cfe0 upstream. The driver must provide throttle and unthrottle in uart_ops when it sets UPSTAT_AUTORTS. Add them using existing stop_rx & enable_interrupts functions. Fixes: 2a76fa283098 (serial: pl011: Adopt generic flag to store auto RTS status) Cc: stable Cc: Lukas Wunner Reported-by: Nuno Gonçalves Tested-by: Nuno Gonçalves Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220614075637.8558-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: stm32: Clear prev values before setting RTS delays

2022-07-21T19:24:43Z

commit 5c5f44e36217de5ead789ff25da71c31c2331c96 upstream. The code lacks clearing of previous DEAT/DEDT values. Thus, changing values on the fly results in garbage delays tending towards the maximum value as more and more bits are ORed together. (Leaving RS485 mode would have cleared the old values though). Fixes: 1bcda09d2910 ("serial: stm32: add support for RS485 hardware control mode") Cc: stable Signed-off-by: Ilpo Järvinen Link: https://lore.kernel.org/r/20220627150753.34510-1-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman

serial: 8250: fix return error code in serial8250_request_std_resource()

2022-07-21T19:24:43Z

commit 6e690d54cfa802f939cefbd2fa2c91bd0b8bd1b6 upstream. If port->mapbase = NULL in serial8250_request_std_resource() , it need return a error code instead of 0. If uart_set_info() fail to request new regions by serial8250_request_std_resource() but the return value of serial8250_request_std_resource() is 0, The system incorrectly considers that the resource application is successful and does not attempt to restore the old setting. A null pointer reference is triggered when the port resource is later invoked. Signed-off-by: Yi Yang Cc: stable Link: https://lore.kernel.org/r/20220628083515.64138-1-yiyang13@huawei.com Signed-off-by: Greg Kroah-Hartman

vt: fix memory overlapping when deleting chars in the buffer

2022-07-21T19:24:42Z

commit 39cdb68c64d84e71a4a717000b6e5de208ee60cc upstream. A memory overlapping copy occurs when deleting a long line. This memory overlapping copy can cause data corruption when scr_memcpyw is optimized to memcpy because memcpy does not ensure its behavior if the destination buffer overlaps with the source buffer. The line buffer is not always broken, because the memcpy utilizes the hardware acceleration, whose result is not deterministic. Fix this problem by using replacing the scr_memcpyw with scr_memmovew. Fixes: 81732c3b2fed ("tty vt: Fix line garbage in virtual console on command line edition") Cc: stable Signed-off-by: Yangxi Xiang Link: https://lore.kernel.org/r/20220628093322.5688-1-xyangxi5@gmail.com Signed-off-by: Greg Kroah-Hartman

tty: serial: samsung_tty: set dma burst_size to 1

2022-07-21T19:24:42Z

commit f7e35e4bf1e8dc2c8cbd5e0955dc1bd58558dae0 upstream. The src_maxburst and dst_maxburst have been changed to 1 but the settings of the UCON register aren't changed yet. They should be changed as well according to the dmaengine slave config. Fixes: aa2f80e752c7 ("serial: samsung: fix maxburst parameter for DMA transactions") Cc: stable Cc: Marek Szyprowski Reviewed-by: Krzysztof Kozlowski Signed-off-by: Chanho Park Link: https://lore.kernel.org/r/20220627065113.139520-1-chanho61.park@samsung.com Signed-off-by: Greg Kroah-Hartman

usb: dwc3: gadget: Fix event pending check

2022-07-21T19:24:42Z

commit 7441b273388b9a59d8387a03ffbbca9d5af6348c upstream. The DWC3_EVENT_PENDING flag is used to protect against invalid call to top-half interrupt handler, which can occur when there's a delay in software detection of the interrupt line deassertion. However, the clearing of this flag was done prior to unmasking the interrupt line, creating opportunity where the top-half handler can come. This breaks the serialization and creates a race between the top-half and bottom-half handler, resulting in losing synchronization between the controller and the driver when processing events. To fix this, make sure the clearing of the DWC3_EVENT_PENDING is done at the end of the bottom-half handler. Fixes: d325a1de49d6 ("usb: dwc3: gadget: Prevent losing events in event cache") Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/8670aaf1cf52e7d1e6df2a827af2d77263b93b75.1656380429.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman