user/sven/linux.git/drivers, branch v5.4.150

xen/balloon: fix balloon kthread freezing

2021-09-30T08:09:26Z

commit 96f5bd03e1be606987644b71899ea56a8d05f825 upstream. Commit 8480ed9c2bbd56 ("xen/balloon: use a kernel thread instead a workqueue") switched the Xen balloon driver to use a kernel thread. Unfortunately the patch omitted to call try_to_freeze() or to use wait_event_freezable_timeout(), causing a system suspend to fail. Fixes: 8480ed9c2bbd56 ("xen/balloon: use a kernel thread instead a workqueue") Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/20210920100345.21939-1-jgross@suse.com Signed-off-by: Juergen Gross Signed-off-by: Greg Kroah-Hartman

thermal/drivers/int340x: Do not set a wrong tcc offset on resume

2021-09-30T08:09:26Z

commit 8b4bd256674720709a9d858a219fcac6f2f253b5 upstream. After upgrading to Linux 5.13.3 I noticed my laptop would shutdown due to overheat (when it should not). It turned out this was due to commit fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting"). What happens is this drivers uses a global variable to keep track of the tcc offset (tcc_offset_save) and uses it on resume. The issue is this variable is initialized to 0, but is only set in tcc_offset_degree_celsius_store, i.e. when the tcc offset is explicitly set by userspace. If that does not happen, the resume path will set the offset to 0 (in my case the h/w default being 3, the offset would become too low after a suspend/resume cycle). The issue did not arise before commit fe6a6de6692e, as the function setting the offset would return if the offset was 0. This is no longer the case (rightfully). Fix this by not applying the offset if it wasn't saved before, reverting back to the old logic. A better approach will come later, but this will be easier to apply to stable kernels. The logic to restore the offset after a resume was there long before commit fe6a6de6692e, but as a value of 0 was considered invalid I'm referencing the commit that made the issue possible in the Fixes tag instead. Fixes: fe6a6de6692e ("thermal/drivers/int340x/processor_thermal: Fix tcc setting") Cc: stable@vger.kernel.org Cc: Srinivas Pandruvada Signed-off-by: Antoine Tenart Signed-off-by: Daniel Lezcano Reviewed-by: Srinivas Pandruvada Tested-by: Srinivas Pandruvada Link: https://lore.kernel.org/r/20210909085613.5577-2-atenart@kernel.org Signed-off-by: Greg Kroah-Hartman

EDAC/synopsys: Fix wrong value type assignment for edac_mode

2021-09-30T08:09:26Z

commit 5297cfa6bdf93e3889f78f9b482e2a595a376083 upstream. dimm->edac_mode contains values of type enum edac_type - not the corresponding capability flags. Fix that. Issue caught by Coverity check "enumerated type mixed with another type." [ bp: Rewrite commit message, add tags. ] Fixes: ae9b56e3996d ("EDAC, synps: Add EDAC support for zynq ddr ecc controller") Signed-off-by: Sai Krishna Potthuri Signed-off-by: Shubhrajyoti Datta Signed-off-by: Borislav Petkov Cc: Link: https://lkml.kernel.org/r/20210818072315.15149-1-shubhrajyoti.datta@xilinx.com Signed-off-by: Greg Kroah-Hartman

spi: Fix tegra20 build with CONFIG_PM=n

2021-09-30T08:09:26Z

[ Upstream commit efafec27c5658ed987e720130772f8933c685e87 ] Without CONFIG_PM enabled, the SET_RUNTIME_PM_OPS() macro ends up being empty, and the only use of tegra_slink_runtime_{resume,suspend} goes away, resulting in drivers/spi/spi-tegra20-slink.c:1200:12: error: ‘tegra_slink_runtime_resume’ defined but not used [-Werror=unused-function] 1200 | static int tegra_slink_runtime_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/spi/spi-tegra20-slink.c:1188:12: error: ‘tegra_slink_runtime_suspend’ defined but not used [-Werror=unused-function] 1188 | static int tegra_slink_runtime_suspend(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~~ mark the functions __maybe_unused to make the build happy. This hits the alpha allmodconfig build (and others). Reported-by: Guenter Roeck Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

net: 6pack: Fix tx timeout and slot time

2021-09-30T08:09:26Z

[ Upstream commit 3c0d2a46c0141913dc6fd126c57d0615677d946e ] tx timeout and slot time are currently specified in units of HZ. On Alpha, HZ is defined as 1024. When building alpha:allmodconfig, this results in the following error message. drivers/net/hamradio/6pack.c: In function 'sixpack_open': drivers/net/hamradio/6pack.c:71:41: error: unsigned conversion from 'int' to 'unsigned char' changes value from '256' to '0' In the 6PACK protocol, tx timeout is specified in units of 10 ms and transmitted over the wire: https://www.linux-ax25.org/wiki/6PACK Defining a value dependent on HZ doesn't really make sense, and presumably comes from the (very historical) situation where HZ was originally 100. Note that the SIXP_SLOTTIME use explicitly is about 10ms granularity: mod_timer(&sp->tx_t, jiffies + ((when + 1) * HZ) / 100); and the SIXP_TXDELAY walue is sent as a byte over the wire. Signed-off-by: Guenter Roeck Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

net: i825xx: Use absolute_pointer for memcpy from fixed memory location

2021-09-30T08:09:25Z

[ Upstream commit dff2d13114f0beec448da9b3716204eb34b0cf41 ] gcc 11.x reports the following compiler warning/error. drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe': arch/m68k/include/asm/string.h:72:25: error: '__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread] Use absolute_pointer() to work around the problem. Cc: Geert Uytterhoeven Signed-off-by: Guenter Roeck Reviewed-by: Geert Uytterhoeven Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

nvme-multipath: fix ANA state updates when a namespace is not present

2021-09-30T08:09:25Z

[ Upstream commit 79f528afa93918519574773ea49a444c104bc1bd ] nvme_update_ana_state() has a deficiency that results in a failure to properly update the ana state for a namespace in the following case: NSIDs in ctrl->namespaces: 1, 3, 4 NSIDs in desc->nsids: 1, 2, 3, 4 Loop iteration 0: ns index = 0, n = 0, ns->head->ns_id = 1, nsid = 1, MATCH. Loop iteration 1: ns index = 1, n = 1, ns->head->ns_id = 3, nsid = 2, NO MATCH. Loop iteration 2: ns index = 2, n = 2, ns->head->ns_id = 4, nsid = 4, MATCH. Where the update to the ANA state of NSID 3 is missed. To fix this increment n and retry the update with the same ns when ns->head->ns_id is higher than nsid, Signed-off-by: Anton Eidelman Signed-off-by: Christoph Hellwig Reviewed-by: Sagi Grimberg Signed-off-by: Sasha Levin

xen/balloon: use a kernel thread instead a workqueue

2021-09-30T08:09:25Z

[ Upstream commit 8480ed9c2bbd56fc86524998e5f2e3e22f5038f6 ] Today the Xen ballooning is done via delayed work in a workqueue. This might result in workqueue hangups being reported in case of large amounts of memory are being ballooned in one go (here 16GB): BUG: workqueue lockup - pool cpus=6 node=0 flags=0x0 nice=0 stuck for 64s! Showing busy workqueues and worker pools: workqueue events: flags=0x0 pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=2/256 refcnt=3 in-flight: 229:balloon_process pending: cache_reap workqueue events_freezable_power_: flags=0x84 pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2 pending: disk_events_workfn workqueue mm_percpu_wq: flags=0x8 pwq 12: cpus=6 node=0 flags=0x0 nice=0 active=1/256 refcnt=2 pending: vmstat_update pool 12: cpus=6 node=0 flags=0x0 nice=0 hung=64s workers=3 idle: 2222 43 This can easily be avoided by using a dedicated kernel thread for doing the ballooning work. Reported-by: Jan Beulich Signed-off-by: Juergen Gross Reviewed-by: Boris Ostrovsky Link: https://lore.kernel.org/r/20210827123206.15429-1-jgross@suse.com Signed-off-by: Juergen Gross Signed-off-by: Sasha Levin

net: stmmac: allow CSR clock of 300MHz

2021-09-30T08:09:24Z

[ Upstream commit 08dad2f4d541fcfe5e7bfda72cc6314bbfd2802f ] The Synopsys Ethernet IP uses the CSR clock as a base clock for MDC. The divisor used is set in the MAC_MDIO_Address register field CR (Clock Rate) The divisor is there to change the CSR clock into a clock that falls below the IEEE 802.3 specified max frequency of 2.5MHz. If the CSR clock is 300MHz, the code falls back to using the reset value in the MAC_MDIO_Address register, as described in the comment above this code. However, 300MHz is actually an allowed value and the proper divider can be estimated quite easily (it's just 1Hz difference!) A CSR frequency of 300MHz with the maximum clock rate value of 0x5 (STMMAC_CSR_250_300M, a divisor of 124) gives somewhere around ~2.42MHz which is below the IEEE 802.3 specified maximum. For the ARTPEC-8 SoC, the CSR clock is this problematic 300MHz, and unfortunately, the reset-value of the MAC_MDIO_Address CR field is 0x0. This leads to a clock rate of zero and a divisor of 42, and gives an MDC frequency of ~7.14MHz. Allow CSR clock of 300MHz by making the comparison inclusive. Signed-off-by: Jesper Nilsson Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

net: macb: fix use after free on rmmod

2021-09-30T08:09:24Z

[ Upstream commit d82d5303c4c539db86588ffb5dc5b26c3f1513e8 ] plat_dev->dev->platform_data is released by platform_device_unregister(), use of pclk and hclk is a use-after-free. Since device unregister won't need a clk device we adjust the function call sequence to fix this issue. [ 31.261225] BUG: KASAN: use-after-free in macb_remove+0x77/0xc6 [macb_pci] [ 31.275563] Freed by task 306: [ 30.276782] platform_device_release+0x25/0x80 Suggested-by: Nicolas Ferre Signed-off-by: Tong Zhang Acked-by: Nicolas Ferre Signed-off-by: David S. Miller Signed-off-by: Sasha Levin