user/sven/linux.git/fs/exec.c, branch v4.13.14

exec: Limit arg stack to at most 75% of _STK_LIM

2017-07-08T03:05:08Z

To avoid pathological stack usage or the need to special-case setuid execs, just limit all arg stack usage to at most 75% of _STK_LIM (6MB). Signed-off-by: Kees Cook Signed-off-by: Linus Torvalds

fs/exec.c: account for argv/envp pointers

2017-06-23T23:15:56Z

When limiting the argv/envp strings during exec to 1/4 of the stack limit, the storage of the pointers to the strings was not included. This means that an exec with huge numbers of tiny strings could eat 1/4 of the stack limit in strings and then additional space would be later used by the pointers to the strings. For example, on 32-bit with a 8MB stack rlimit, an exec with 1677721 single-byte strings would consume less than 2MB of stack, the max (8MB / 4) amount allowed, but the pointers to the strings would consume the remaining additional stack space (1677721 * 4 == 6710884). The result (1677721 + 6710884 == 8388605) would exhaust stack space entirely. Controlling this stack exhaustion could result in pathological behavior in setuid binaries (CVE-2017-1000365). [akpm@linux-foundation.org: additional commenting from Kees] Fixes: b6a2fea39318 ("mm: variable length argument support") Link: http://lkml.kernel.org/r/20170622001720.GA32173@beast Signed-off-by: Kees Cook Acked-by: Rik van Riel Acked-by: Michal Hocko Cc: Alexander Viro Cc: Qualys Security Advisory Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

x86/arch_prctl: Add ARCH_[GET|SET]_CPUID

2017-03-20T15:10:34Z

Intel supports faulting on the CPUID instruction beginning with Ivy Bridge. When enabled, the processor will fault on attempts to execute the CPUID instruction with CPL>0. Exposing this feature to userspace will allow a ptracer to trap and emulate the CPUID instruction. When supported, this feature is controlled by toggling bit 0 of MSR_MISC_FEATURES_ENABLES. It is documented in detail in Section 2.3.2 of https://bugzilla.kernel.org/attachment.cgi?id=243991 Implement a new pair of arch_prctls, available on both x86-32 and x86-64. ARCH_GET_CPUID: Returns the current CPUID state, either 0 if CPUID faulting is enabled (and thus the CPUID instruction is not available) or 1 if CPUID faulting is not enabled. ARCH_SET_CPUID: Set the CPUID state to the second argument. If cpuid_enabled is 0 CPUID faulting will be activated, otherwise it will be deactivated. Returns ENODEV if CPUID faulting is not supported on this system. The state of the CPUID faulting flag is propagated across forks, but reset upon exec. Signed-off-by: Kyle Huey Cc: Grzegorz Andrejczuk Cc: kvm@vger.kernel.org Cc: Radim Krčmář Cc: Peter Zijlstra Cc: Dave Hansen Cc: Andi Kleen Cc: linux-kselftest@vger.kernel.org Cc: Nadav Amit Cc: Robert O'Callahan Cc: Richard Weinberger Cc: "Rafael J. Wysocki" Cc: Borislav Petkov Cc: Andy Lutomirski Cc: Len Brown Cc: Shuah Khan Cc: user-mode-linux-devel@lists.sourceforge.net Cc: Jeff Dike Cc: Alexander Viro Cc: user-mode-linux-user@lists.sourceforge.net Cc: David Matlack Cc: Boris Ostrovsky Cc: Dmitry Safonov Cc: linux-fsdevel@vger.kernel.org Cc: Paolo Bonzini Link: http://lkml.kernel.org/r/20170320081628.18952-9-khuey@kylehuey.com Signed-off-by: Thomas Gleixner

sched/headers: Prepare for new header dependencies before moving code to

2017-03-02T07:42:35Z

We are going to split out of , which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder file that just maps to to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

sched/headers: Prepare for new header dependencies before moving code to

2017-03-02T07:42:30Z

We are going to split out of , which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder file that just maps to to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

sched/headers: Prepare for new header dependencies before moving code to

2017-03-02T07:42:29Z

We are going to split out of , which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder file that just maps to to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

sched/headers: Prepare for new header dependencies before moving code to

2017-03-02T07:42:28Z

We are going to split out of , which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder file that just maps to to make this patch obviously correct and bisectable. Include the new header in the files that are going to need it. Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

sched/headers: Prepare for new header dependencies before moving code to

2017-03-02T07:42:28Z

We are going to split out of , which will have to be picked up from other headers and a couple of .c files. Create a trivial placeholder file that just maps to to make this patch obviously correct and bisectable. The APIs that are going to be moved first are: mm_alloc() __mmdrop() mmdrop() mmdrop_async_fn() mmdrop_async() mmget_not_zero() mmput() mmput_async() get_task_mm() mm_access() mm_release() Include the new header in the files that are going to need it. Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

sched/headers, cgroups: Remove the threadgroup_change_*() wrappery

2017-03-02T07:42:25Z

threadgroup_change_begin()/end() is a pointless wrapper around cgroup_threadgroup_change_begin()/end(), minus a might_sleep() in the !CONFIG_CGROUPS=y case. Remove the wrappery, move the might_sleep() (the down_read() already has a might_sleep() check). This debloats a bit and simplifies this API. Update all call sites. No change in functionality. Acked-by: Linus Torvalds Cc: Mike Galbraith Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar

vfs: Use upper filesystem inode in bprm_fill_uid()

2017-02-14T07:51:12Z

Right now bprm_fill_uid() uses inode fetched from file_inode(bprm->file). This in turn returns inode of lower filesystem (in a stacked filesystem setup). I was playing with modified patches of shiftfs posted by james bottomley and realized that through shiftfs setuid bit does not take effect. And reason being that we fetch uid/gid from inode of lower fs (and not from shiftfs inode). And that results in following checks failing. /* We ignore suid/sgid if there are no mappings for them in the ns */ if (!kuid_has_mapping(bprm->cred->user_ns, uid) || !kgid_has_mapping(bprm->cred->user_ns, gid)) return; uid/gid fetched from lower fs inode might not be mapped inside the user namespace of container. So we need to look at uid/gid fetched from upper filesystem (shiftfs in this particular case) and these should be mapped and setuid bit can take affect. Signed-off-by: Vivek Goyal Signed-off-by: Eric W. Biederman