user/sven/linux.git/fs/ext4/inline.c, branch v4.11

ext4: mark inode dirty after converting inline directory

2017-03-15T18:52:02Z

If ext4_convert_inline_data() was called on a directory with inline data, the filesystem was left in an inconsistent state (as considered by e2fsck) because the file size was not increased to cover the new block. This happened because the inode was not marked dirty after i_disksize was updated. Fix this by marking the inode dirty at the end of ext4_finish_convert_inline_dir(). This bug was probably not noticed before because most users mark the inode dirty afterwards for other reasons. But if userspace executed FS_IOC_SET_ENCRYPTION_POLICY with invalid parameters, as exercised by 'kvm-xfstests -c adv generic/396', then the inode was never marked dirty after updating i_disksize. Cc: stable@vger.kernel.org # 3.10+ Fixes: 3c47d54170b6a678875566b1b8d6dcf57904e49b Signed-off-by: Eric Biggers Signed-off-by: Theodore Ts'o

ext4: add shutdown bit and check for it

2017-02-05T06:28:48Z

Add a shutdown bit that will cause ext4 processing to fail immediately with EIO. Signed-off-by: Theodore Ts'o

ext4: fix inline data error paths

2017-02-05T04:04:00Z

The write_end() function must always unlock the page and drop its ref count, even on an error. Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org

ext4: propagate error values from ext4_inline_data_truncate()

2017-01-23T00:35:49Z

Signed-off-by: Theodore Ts'o

ext4: avoid calling ext4_mark_inode_dirty() under unneeded semaphores

2017-01-12T03:14:49Z

There is no need to call ext4_mark_inode_dirty while holding xattr_sem or i_data_sem, so where it's easy to avoid it, move it out from the critical region. Signed-off-by: Theodore Ts'o

ext4: fix deadlock between inline_data and ext4_expand_extra_isize_ea()

2017-01-12T02:50:46Z

The xattr_sem deadlock problems fixed in commit 2e81a4eeedca: "ext4: avoid deadlock when expanding inode size" didn't include the use of xattr_sem in fs/ext4/inline.c. With the addition of project quota which added a new extra inode field, this exposed deadlocks in the inline_data code similar to the ones fixed by 2e81a4eeedca. The deadlock can be reproduced via: dmesg -n 7 mke2fs -t ext4 -O inline_data -Fq -I 256 /dev/vdc 32768 mount -t ext4 -o debug_want_extra_isize=24 /dev/vdc /vdc mkdir /vdc/a umount /vdc mount -t ext4 /dev/vdc /vdc echo foo > /vdc/a/foo and looks like this: [ 11.158815] [ 11.160276] ============================================= [ 11.161960] [ INFO: possible recursive locking detected ] [ 11.161960] 4.10.0-rc3-00015-g011b30a8a3cf #160 Tainted: G W [ 11.161960] --------------------------------------------- [ 11.161960] bash/2519 is trying to acquire lock: [ 11.161960] (&ei->xattr_sem){++++..}, at: [] ext4_expand_extra_isize_ea+0x3d/0x4cd [ 11.161960] [ 11.161960] but task is already holding lock: [ 11.161960] (&ei->xattr_sem){++++..}, at: [] ext4_try_add_inline_entry+0x3a/0x152 [ 11.161960] [ 11.161960] other info that might help us debug this: [ 11.161960] Possible unsafe locking scenario: [ 11.161960] [ 11.161960] CPU0 [ 11.161960] ---- [ 11.161960] lock(&ei->xattr_sem); [ 11.161960] lock(&ei->xattr_sem); [ 11.161960] [ 11.161960] *** DEADLOCK *** [ 11.161960] [ 11.161960] May be due to missing lock nesting notation [ 11.161960] [ 11.161960] 4 locks held by bash/2519: [ 11.161960] #0: (sb_writers#3){.+.+.+}, at: [] mnt_want_write+0x1e/0x3e [ 11.161960] #1: (&type->i_mutex_dir_key){++++++}, at: [] path_openat+0x338/0x67a [ 11.161960] #2: (jbd2_handle){++++..}, at: [] start_this_handle+0x582/0x622 [ 11.161960] #3: (&ei->xattr_sem){++++..}, at: [] ext4_try_add_inline_entry+0x3a/0x152 [ 11.161960] [ 11.161960] stack backtrace: [ 11.161960] CPU: 0 PID: 2519 Comm: bash Tainted: G W 4.10.0-rc3-00015-g011b30a8a3cf #160 [ 11.161960] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.1-1 04/01/2014 [ 11.161960] Call Trace: [ 11.161960] dump_stack+0x72/0xa3 [ 11.161960] __lock_acquire+0xb7c/0xcb9 [ 11.161960] ? kvm_clock_read+0x1f/0x29 [ 11.161960] ? __lock_is_held+0x36/0x66 [ 11.161960] ? __lock_is_held+0x36/0x66 [ 11.161960] lock_acquire+0x106/0x18a [ 11.161960] ? ext4_expand_extra_isize_ea+0x3d/0x4cd [ 11.161960] down_write+0x39/0x72 [ 11.161960] ? ext4_expand_extra_isize_ea+0x3d/0x4cd [ 11.161960] ext4_expand_extra_isize_ea+0x3d/0x4cd [ 11.161960] ? _raw_read_unlock+0x22/0x2c [ 11.161960] ? jbd2_journal_extend+0x1e2/0x262 [ 11.161960] ? __ext4_journal_get_write_access+0x3d/0x60 [ 11.161960] ext4_mark_inode_dirty+0x17d/0x26d [ 11.161960] ? ext4_add_dirent_to_inline.isra.12+0xa5/0xb2 [ 11.161960] ext4_add_dirent_to_inline.isra.12+0xa5/0xb2 [ 11.161960] ext4_try_add_inline_entry+0x69/0x152 [ 11.161960] ext4_add_entry+0xa3/0x848 [ 11.161960] ? __brelse+0x14/0x2f [ 11.161960] ? _raw_spin_unlock_irqrestore+0x44/0x4f [ 11.161960] ext4_add_nondir+0x17/0x5b [ 11.161960] ext4_create+0xcf/0x133 [ 11.161960] ? ext4_mknod+0x12f/0x12f [ 11.161960] lookup_open+0x39e/0x3fb [ 11.161960] ? __wake_up+0x1a/0x40 [ 11.161960] ? lock_acquire+0x11e/0x18a [ 11.161960] path_openat+0x35c/0x67a [ 11.161960] ? sched_clock_cpu+0xd7/0xf2 [ 11.161960] do_filp_open+0x36/0x7c [ 11.161960] ? _raw_spin_unlock+0x22/0x2c [ 11.161960] ? __alloc_fd+0x169/0x173 [ 11.161960] do_sys_open+0x59/0xcc [ 11.161960] SyS_open+0x1d/0x1f [ 11.161960] do_int80_syscall_32+0x4f/0x61 [ 11.161960] entry_INT80_32+0x2f/0x2f [ 11.161960] EIP: 0xb76ad469 [ 11.161960] EFLAGS: 00000286 CPU: 0 [ 11.161960] EAX: ffffffda EBX: 08168ac8 ECX: 00008241 EDX: 000001b6 [ 11.161960] ESI: b75e46bc EDI: b7755000 EBP: bfbdb108 ESP: bfbdafc0 [ 11.161960] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b Cc: stable@vger.kernel.org # 3.10 (requires 2e81a4eeedca as a prereq) Reported-by: George Spelvin Signed-off-by: Theodore Ts'o

ext4: return -ENOMEM instead of success

2016-12-10T14:56:01Z

We should set the error code if kzalloc() fails. Fixes: 67cf5b09a46f ("ext4: add the basic function for inline data support") Signed-off-by: Dan Carpenter Signed-off-by: Theodore Ts'o Cc: stable@vger.kernel.org

ext4: only set S_DAX if DAX is really supported

2016-11-20T22:32:59Z

Currently we have S_DAX set inode->i_flags for a regular file whenever ext4 is mounted with dax mount option. However in some cases we cannot really do DAX - e.g. when inode is marked to use data journalling, when inode data is being encrypted, or when inode is stored inline. Make sure S_DAX flag is appropriately set/cleared in these cases. Reviewed-by: Ross Zwisler Signed-off-by: Jan Kara Signed-off-by: Theodore Ts'o

ext4: use current_time() for inode timestamps

2016-11-15T02:40:10Z

CURRENT_TIME_SEC and CURRENT_TIME are not y2038 safe. current_time() will be transitioned to be y2038 safe along with vfs. current_time() returns timestamps according to the granularities set in the super_block. The granularity check in ext4_current_time() to call current_time() or CURRENT_TIME_SEC is not required. Use current_time() directly to obtain timestamps unconditionally, and remove ext4_current_time(). Quota files are assumed to be on the same filesystem. Hence, use current_time() for these files as well. Signed-off-by: Deepa Dinamani Signed-off-by: Theodore Ts'o Reviewed-by: Arnd Bergmann

ext4 crypto: migrate into vfs's crypto engine

2016-07-10T18:01:03Z

This patch removes the most parts of internal crypto codes. And then, it modifies and adds some ext4-specific crypt codes to use the generic facility. Signed-off-by: Jaegeuk Kim Signed-off-by: Theodore Ts'o