user/sven/linux.git/fs/logfs/readwrite.c, branch v4.9.46

fs: Replace CURRENT_TIME with current_time() for inode timestamps

2016-09-28T01:06:21Z

CURRENT_TIME macro is not appropriate for filesystems as it doesn't use the right granularity for filesystem timestamps. Use current_time() instead. CURRENT_TIME is also not y2038 safe. This is also in preparation for the patch that transitions vfs timestamps to use 64 bit time and hence make them y2038 safe. As part of the effort current_time() will be extended to do range checks. Hence, it is necessary for all file system timestamps to use current_time(). Also, current_time() will be transitioned along with vfs to be y2038 safe. Note that whenever a single call to current_time() is used to change timestamps in different inodes, it is because they share the same time granularity. Signed-off-by: Deepa Dinamani Reviewed-by: Arnd Bergmann Acked-by: Felipe Balbi Acked-by: Steven Whitehouse Acked-by: Ryusuke Konishi Acked-by: David Sterba Signed-off-by: Al Viro

mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macros

2016-04-04T17:41:08Z

PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> ; - >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> ; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov Acked-by: Michal Hocko Signed-off-by: Linus Torvalds

logfs: constify logfs_block_ops structures

2016-01-09T07:55:45Z

The logfs_block_ops structures are never modified, so declare them as const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall Signed-off-by: Al Viro

fs/logfs/readwrite.c: kernel-doc warning fixes

2014-08-07T01:01:12Z

s/-/:/ and fix variable names. Signed-off-by: Fabian Frederick Cc: Joern Engel Cc: Prasad Joshi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm + fs: store shadow entries in page cache

2014-04-03T23:21:01Z

Reclaim will be leaving shadow entries in the page cache radix tree upon evicting the real page. As those pages are found from the LRU, an iput() can lead to the inode being freed concurrently. At this point, reclaim must no longer install shadow pages because the inode freeing code needs to ensure the page tree is really empty. Add an address_space flag, AS_EXITING, that the inode freeing code sets under the tree lock before doing the final truncate. Reclaim will check for this flag before installing shadow pages. Signed-off-by: Johannes Weiner Reviewed-by: Rik van Riel Reviewed-by: Minchan Kim Cc: Andrea Arcangeli Cc: Bob Liu Cc: Christoph Hellwig Cc: Dave Chinner Cc: Greg Thelen Cc: Hugh Dickins Cc: Jan Kara Cc: KOSAKI Motohiro Cc: Luigi Semenzato Cc: Mel Gorman Cc: Metin Doslu Cc: Michel Lespinasse Cc: Ozgun Erdogan Cc: Peter Zijlstra Cc: Roman Gushchin Cc: Ryan Mallon Cc: Tejun Heo Cc: Vlastimil Babka Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

logfs: drop vmtruncate

2012-12-20T23:40:53Z

Removed vmtruncate Signed-off-by: Marco Stornelli Signed-off-by: Al Viro

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

2012-10-02T18:11:09Z

Pull user namespace changes from Eric Biederman: "This is a mostly modest set of changes to enable basic user namespace support. This allows the code to code to compile with user namespaces enabled and removes the assumption there is only the initial user namespace. Everything is converted except for the most complex of the filesystems: autofs4, 9p, afs, ceph, cifs, coda, fuse, gfs2, ncpfs, nfs, ocfs2 and xfs as those patches need a bit more review. The strategy is to push kuid_t and kgid_t values are far down into subsystems and filesystems as reasonable. Leaving the make_kuid and from_kuid operations to happen at the edge of userspace, as the values come off the disk, and as the values come in from the network. Letting compile type incompatible compile errors (present when user namespaces are enabled) guide me to find the issues. The most tricky areas have been the places where we had an implicit union of uid and gid values and were storing them in an unsigned int. Those places were converted into explicit unions. I made certain to handle those places with simple trivial patches. Out of that work I discovered we have generic interfaces for storing quota by projid. I had never heard of the project identifiers before. Adding full user namespace support for project identifiers accounts for most of the code size growth in my git tree. Ultimately there will be work to relax privlige checks from "capable(FOO)" to "ns_capable(user_ns, FOO)" where it is safe allowing root in a user names to do those things that today we only forbid to non-root users because it will confuse suid root applications. While I was pushing kuid_t and kgid_t changes deep into the audit code I made a few other cleanups. I capitalized on the fact we process netlink messages in the context of the message sender. I removed usage of NETLINK_CRED, and started directly using current->tty. Some of these patches have also made it into maintainer trees, with no problems from identical code from different trees showing up in linux-next. After reading through all of this code I feel like I might be able to win a game of kernel trivial pursuit." Fix up some fairly trivial conflicts in netfilter uid/git logging code. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (107 commits) userns: Convert the ufs filesystem to use kuid/kgid where appropriate userns: Convert the udf filesystem to use kuid/kgid where appropriate userns: Convert ubifs to use kuid/kgid userns: Convert squashfs to use kuid/kgid where appropriate userns: Convert reiserfs to use kuid and kgid where appropriate userns: Convert jfs to use kuid/kgid where appropriate userns: Convert jffs2 to use kuid and kgid where appropriate userns: Convert hpfs to use kuid and kgid where appropriate userns: Convert btrfs to use kuid/kgid where appropriate userns: Convert bfs to use kuid/kgid where appropriate userns: Convert affs to use kuid/kgid wherwe appropriate userns: On alpha modify linux_to_osf_stat to use convert from kuids and kgids userns: On ia64 deal with current_uid and current_gid being kuid and kgid userns: On ppc convert current_uid from a kuid before printing. userns: Convert s390 getting uid and gid system calls to use kuid and kgid userns: Convert s390 hypfs to use kuid and kgid where appropriate userns: Convert binder ipc to use kuids userns: Teach security_path_chown to take kuids and kgids userns: Add user namespace support to IMA userns: Convert EVM to deal with kuids and kgids in it's hmac computation ...

userns: Convert logfs to use kuid/kgid where appropriate

2012-09-21T10:13:13Z

Cc: Joern Engel Cc: Prasad Joshi Acked-by: Serge Hallyn Signed-off-by: Eric W. Biederman

Merge tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream

2012-08-26T17:14:11Z

Pull LogFS bugfixes from Prasad Joshi: - "logfs: query block device for number of pages to send with bio" This BUG was found when LogFS was used on KVM. The patch fixes the problem by asking for underlaying block device the number of pages to send with each BIO. - "logfs: maintain the ordering of meta-inode destruction" LogFS maintains file system meta-data in special inodes. These inodes are releated to each other, therefore they must be destroyed in a proper order. - "logfs: initialize the number of iovecs in bio" LogFS used to panic when it was created on an encrypted LVM volume. The patch fixes the problem by properly initializing the BIO. Plus a couple more: - logfs: create a pagecache page if it is not present - logfs: destroy the reserved inodes while unmounting * tag 'for-linus' of git://github.com/prasad-joshi/logfs_upstream: logfs: query block device for number of pages to send with bio logfs: maintain the ordering of meta-inode destruction logfs: create a pagecache page if it is not present logfs: initialize the number of iovecs in bio logfs: destroy the reserved inodes while unmounting

vfs: Rename end_writeback() to clear_inode()

2012-05-06T05:43:41Z

After we moved inode_sync_wait() from end_writeback() it doesn't make sense to call the function end_writeback() anymore. Rename it to clear_inode() which well says what the function really does - set I_CLEAR flag. Signed-off-by: Jan Kara Signed-off-by: Fengguang Wu