user/sven/linux.git/fs/proc, branch v4.14.45

fs/proc/proc_sysctl.c: fix potential page fault while unregistering sysctl table

2018-05-30T05:52:23Z

[ Upstream commit a0b0d1c345d0317efe594df268feb5ccc99f651e ] proc_sys_link_fill_cache() does not take currently unregistering sysctl tables into account, which might result into a page fault in sysctl_follow_link() - add a check to fix it. This bug has been present since v3.4. Link: http://lkml.kernel.org/r/20180228013506.4915-1-danilokrummrich@dk-develop.de Fixes: 0e47c99d7fe25 ("sysctl: Replace root_list with links between sysctl_table_sets") Signed-off-by: Danilo Krummrich Acked-by: Kees Cook Reviewed-by: Andrew Morton Cc: "Luis R . Rodriguez" Cc: "Eric W. Biederman" Cc: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

proc: Use underscores for SSBD in 'status'

2018-05-22T16:54:04Z

commit e96f46ee8587607a828f783daa6eb5b44d25004d upstream The style for the 'status' file is CamelCase or this. _. Fixes: fae1fa0fc ("proc: Provide details on speculation flaw mitigations") Signed-off-by: Konrad Rzeszutek Wilk Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

prctl: Add force disable speculation

2018-05-22T16:54:04Z

commit 356e4bfff2c5489e016fdb925adbf12a1e3950ee upstream For certain use cases it is desired to enforce mitigations so they cannot be undone afterwards. That's important for loader stubs which want to prevent a child from disabling the mitigation again. Will also be used for seccomp(). The extra state preserving of the prctl state for SSB is a preparatory step for EBPF dymanic speculation control. Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

proc: Provide details on speculation flaw mitigations

2018-05-22T16:54:03Z

commit fae1fa0fc6cca8beee3ab8ed71d54f9a78fa3f64 upstream As done with seccomp and no_new_privs, also show speculation flaw mitigation state in /proc/$pid/status. Signed-off-by: Kees Cook Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

proc: do not access cmdline nor environ from file-backed areas

2018-05-19T08:20:27Z

commit 7f7ccc2ccc2e70c6054685f5e3522efa81556830 upstream. proc_pid_cmdline_read() and environ_read() directly access the target process' VM to retrieve the command line and environment. If this process remaps these areas onto a file via mmap(), the requesting process may experience various issues such as extra delays if the underlying device is slow to respond. Let's simply refuse to access file-backed areas in these functions. For this we add a new FOLL_ANON gup flag that is passed to all calls to access_remote_vm(). The code already takes care of such failures (including unmapped areas). Accesses via /proc/pid/mem were not changed though. This was assigned CVE-2018-1120. Note for stable backports: the patch may apply to kernels prior to 4.11 but silently miss one location; it must be checked that no call to access_remote_vm() keeps zero as the last argument. Reported-by: Qualys Security Advisory Cc: Linus Torvalds Cc: Andy Lutomirski Cc: Oleg Nesterov Cc: stable@vger.kernel.org Signed-off-by: Willy Tarreau Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

vfs/proc/kcore, x86/mm/kcore: Fix SMAP fault when dumping vsyscall user page

2018-04-26T09:02:20Z

[ Upstream commit 595dd46ebfc10be041a365d0a3fa99df50b6ba73 ] Commit: df04abfd181a ("fs/proc/kcore.c: Add bounce buffer for ktext data") ... introduced a bounce buffer to work around CONFIG_HARDENED_USERCOPY=y. However, accessing the vsyscall user page will cause an SMAP fault. Replace memcpy() with copy_from_user() to fix this bug works, but adding a common way to handle this sort of user page may be useful for future. Currently, only vsyscall page requires KCORE_USER. Signed-off-by: Jia Zhang Reviewed-by: Jiri Olsa Cc: Al Viro Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Thomas Gleixner Cc: jolsa@redhat.com Link: http://lkml.kernel.org/r/1518446694-21124-2-git-send-email-zhang.jia@linux.alibaba.com Signed-off-by: Ingo Molnar Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

proc: fix /proc/*/map_files lookup

2018-04-26T09:02:18Z

[ Upstream commit ac7f1061c2c11bb8936b1b6a94cdb48de732f7a4 ] Current code does: if (sscanf(dentry->d_name.name, "%lx-%lx", start, end) != 2) However sscanf() is broken garbage. It silently accepts whitespace between format specifiers (did you know that?). It silently accepts valid strings which result in integer overflow. Do not use sscanf() for any even remotely reliable parsing code. OK # readlink '/proc/1/map_files/55a23af39000-55a23b05b000' /lib/systemd/systemd broken # readlink '/proc/1/map_files/ 55a23af39000-55a23b05b000' /lib/systemd/systemd broken # readlink '/proc/1/map_files/55a23af39000-55a23b05b000 ' /lib/systemd/systemd very broken # readlink '/proc/1/map_files/1000000000000000055a23af39000-55a23b05b000' /lib/systemd/systemd Andrei said: : This patch breaks criu. It was a bug in criu. And this bug is on a minor : path, which works when memfd_create() isn't available. It is a reason why : I ask to not backport this patch to stable kernels. : : In CRIU this bug can be triggered, only if this patch will be backported : to a kernel which version is lower than v3.16. Link: http://lkml.kernel.org/r/20171120212706.GA14325@avx2 Signed-off-by: Alexey Dobriyan Cc: Pavel Emelyanov Cc: Andrei Vagin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

fs/proc/kcore.c: use probe_kernel_read() instead of memcpy()

2018-02-16T19:23:05Z

commit d0290bc20d4739b7a900ae37eb5d4cc3be2b393f upstream. Commit df04abfd181a ("fs/proc/kcore.c: Add bounce buffer for ktext data") added a bounce buffer to avoid hardened usercopy checks. Copying to the bounce buffer was implemented with a simple memcpy() assuming that it is always valid to read from kernel memory iff the kern_addr_valid() check passed. A simple, but pointless, test case like "dd if=/proc/kcore of=/dev/null" now can easily crash the kernel, since the former execption handling on invalid kernel addresses now doesn't work anymore. Also adding a kern_addr_valid() implementation wouldn't help here. Most architectures simply return 1 here, while a couple implemented a page table walk to figure out if something is mapped at the address in question. With DEBUG_PAGEALLOC active mappings are established and removed all the time, so that relying on the result of kern_addr_valid() before executing the memcpy() also doesn't work. Therefore simply use probe_kernel_read() to copy to the bounce buffer. This also allows to simplify read_kcore(). At least on s390 this fixes the observed crashes and doesn't introduce warnings that were removed with df04abfd181a ("fs/proc/kcore.c: Add bounce buffer for ktext data"), even though the generic probe_kernel_read() implementation uses uaccess functions. While looking into this I'm also wondering if kern_addr_valid() could be completely removed...(?) Link: http://lkml.kernel.org/r/20171202132739.99971-1-heiko.carstens@de.ibm.com Fixes: df04abfd181a ("fs/proc/kcore.c: Add bounce buffer for ktext data") Fixes: f5509cc18daa ("mm: Hardened usercopy") Signed-off-by: Heiko Carstens Acked-by: Kees Cook Cc: Jiri Olsa Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

proc: fix coredump vs read /proc/*/stat race

2018-01-23T18:58:18Z

commit 8bb2ee192e482c5d500df9f2b1b26a560bd3026f upstream. do_task_stat() accesses IP and SP of a task without bumping reference count of a stack (which became an entity with independent lifetime at some point). Steps to reproduce: #include #include #include #include #include #include #include #include int main(void) { setrlimit(RLIMIT_CORE, &(struct rlimit){}); while (1) { char buf[64]; char buf2[4096]; pid_t pid; int fd; pid = fork(); if (pid == 0) { *(volatile int *)0 = 0; } snprintf(buf, sizeof(buf), "/proc/%u/stat", pid); fd = open(buf, O_RDONLY); read(fd, buf2, sizeof(buf2)); close(fd); waitpid(pid, NULL, 0); } return 0; } BUG: unable to handle kernel paging request at 0000000000003fd8 IP: do_task_stat+0x8b4/0xaf0 PGD 800000003d73e067 P4D 800000003d73e067 PUD 3d558067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 1417 Comm: a.out Not tainted 4.15.0-rc8-dirty #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc27 04/01/2014 RIP: 0010:do_task_stat+0x8b4/0xaf0 Call Trace: proc_single_show+0x43/0x70 seq_read+0xe6/0x3b0 __vfs_read+0x1e/0x120 vfs_read+0x84/0x110 SyS_read+0x3d/0xa0 entry_SYSCALL_64_fastpath+0x13/0x6c RIP: 0033:0x7f4d7928cba0 RSP: 002b:00007ffddb245158 EFLAGS: 00000246 Code: 03 b7 a0 01 00 00 4c 8b 4c 24 70 4c 8b 44 24 78 4c 89 74 24 18 e9 91 f9 ff ff f6 45 4d 02 0f 84 fd f7 ff ff 48 8b 45 40 48 89 ef <48> 8b 80 d8 3f 00 00 48 89 44 24 20 e8 9b 97 eb ff 48 89 44 24 RIP: do_task_stat+0x8b4/0xaf0 RSP: ffffc90000607cc8 CR2: 0000000000003fd8 John Ogness said: for my tests I added an else case to verify that the race is hit and correctly mitigated. Link: http://lkml.kernel.org/r/20180116175054.GA11513@avx2 Signed-off-by: Alexey Dobriyan Reported-by: "Kohli, Gaurav" Tested-by: John Ogness Cc: Peter Zijlstra Cc: Ingo Molnar Cc: Oleg Nesterov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

x86 / CPU: Always show current CPU frequency in /proc/cpuinfo

2018-01-10T08:31:20Z

commit 7d5905dc14a87805a59f3c5bf70173aac2bb18f8 upstream. After commit 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") the "cpu MHz" number in /proc/cpuinfo on x86 can be either the nominal CPU frequency (which is constant) or the frequency most recently requested by a scaling governor in cpufreq, depending on the cpufreq configuration. That is somewhat inconsistent and is different from what it was before 4.13, so in order to restore the previous behavior, make it report the current CPU frequency like the scaling_cur_freq sysfs file in cpufreq. To that end, modify the /proc/cpuinfo implementation on x86 to use aperfmperf_snapshot_khz() to snapshot the APERF and MPERF feedback registers, if available, and use their values to compute the CPU frequency to be reported as "cpu MHz". However, do that carefully enough to avoid accumulating delays that lead to unacceptable access times for /proc/cpuinfo on systems with many CPUs. Run aperfmperf_snapshot_khz() once on all CPUs asynchronously at the /proc/cpuinfo open time, add a single delay upfront (if necessary) at that point and simply compute the current frequency while running show_cpuinfo() for each individual CPU. Also, to avoid slowing down /proc/cpuinfo accesses too much, reduce the default delay between consecutive APERF and MPERF reads to 10 ms, which should be sufficient to get large enough numbers for the frequency computation in all cases. Fixes: 890da9cf0983 (Revert "x86: do not use cpufreq_quick_get() for /proc/cpuinfo "cpu MHz"") Signed-off-by: Rafael J. Wysocki Acked-by: Thomas Gleixner Tested-by: Thomas Gleixner Acked-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman