user/sven/linux.git/fs, branch v4.14.334

ext4: prevent the normalized size from exceeding EXT_MAX_BLOCKS

2023-12-20T14:32:38Z

commit 2dcf5fde6dffb312a4bfb8ef940cea2d1f402e32 upstream. For files with logical blocks close to EXT_MAX_BLOCKS, the file size predicted in ext4_mb_normalize_request() may exceed EXT_MAX_BLOCKS. This can cause some blocks to be preallocated that will not be used. And after [Fixes], the following issue may be triggered: ========================================================= kernel BUG at fs/ext4/mballoc.c:4653! Internal error: Oops - BUG: 00000000f2000800 [#1] SMP CPU: 1 PID: 2357 Comm: xfs_io 6.7.0-rc2-00195-g0f5cc96c367f Hardware name: linux,dummy-virt (DT) pc : ext4_mb_use_inode_pa+0x148/0x208 lr : ext4_mb_use_inode_pa+0x98/0x208 Call trace: ext4_mb_use_inode_pa+0x148/0x208 ext4_mb_new_inode_pa+0x240/0x4a8 ext4_mb_use_best_found+0x1d4/0x208 ext4_mb_try_best_found+0xc8/0x110 ext4_mb_regular_allocator+0x11c/0xf48 ext4_mb_new_blocks+0x790/0xaa8 ext4_ext_map_blocks+0x7cc/0xd20 ext4_map_blocks+0x170/0x600 ext4_iomap_begin+0x1c0/0x348 ========================================================= Here is a calculation when adjusting ac_b_ex in ext4_mb_new_inode_pa(): ex.fe_logical = orig_goal_end - EXT4_C2B(sbi, ex.fe_len); if (ac->ac_o_ex.fe_logical >= ex.fe_logical) goto adjust_bex; The problem is that when orig_goal_end is subtracted from ac_b_ex.fe_len it is still greater than EXT_MAX_BLOCKS, which causes ex.fe_logical to overflow to a very small value, which ultimately triggers a BUG_ON in ext4_mb_new_inode_pa() because pa->pa_free < len. The last logical block of an actual write request does not exceed EXT_MAX_BLOCKS, so in ext4_mb_normalize_request() also avoids normalizing the last logical block to exceed EXT_MAX_BLOCKS to avoid the above issue. The test case in [Link] can reproduce the above issue with 64k block size. Link: https://patchwork.kernel.org/project/fstests/list/?series=804003 Cc: # 6.4 Fixes: 93cdf49f6eca ("ext4: Fix best extent lstart adjustment logic in ext4_mb_new_inode_pa()") Signed-off-by: Baokun Li Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20231127063313.3734294-1-libaokun1@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman

nilfs2: fix missing error check for sb_set_blocksize call

2023-12-13T15:46:17Z

commit d61d0ab573649789bf9eb909c89a1a193b2e3d10 upstream. When mounting a filesystem image with a block size larger than the page size, nilfs2 repeatedly outputs long error messages with stack traces to the kernel log, such as the following: getblk(): invalid block size 8192 requested logical block size: 512 ... Call Trace: dump_stack_lvl+0x92/0xd4 dump_stack+0xd/0x10 bdev_getblk+0x33a/0x354 __breadahead+0x11/0x80 nilfs_search_super_root+0xe2/0x704 [nilfs2] load_nilfs+0x72/0x504 [nilfs2] nilfs_mount+0x30f/0x518 [nilfs2] legacy_get_tree+0x1b/0x40 vfs_get_tree+0x18/0xc4 path_mount+0x786/0xa88 __ia32_sys_mount+0x147/0x1a8 __do_fast_syscall_32+0x56/0xc8 do_fast_syscall_32+0x29/0x58 do_SYSENTER_32+0x15/0x18 entry_SYSENTER_32+0x98/0xf1 ... This overloads the system logger. And to make matters worse, it sometimes crashes the kernel with a memory access violation. This is because the return value of the sb_set_blocksize() call, which should be checked for errors, is not checked. The latter issue is due to out-of-buffer memory being accessed based on a large block size that caused sb_set_blocksize() to fail for buffers read with the initial minimum block size that remained unupdated in the super_block structure. Since nilfs2 mkfs tool does not accept block sizes larger than the system page size, this has been overlooked. However, it is possible to create this situation by intentionally modifying the tool or by passing a filesystem image created on a system with a large page size to a system with a smaller page size and mounting it. Fix this issue by inserting the expected error handling for the call to sb_set_blocksize(). Link: https://lkml.kernel.org/r/20231129141547.4726-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi Tested-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

nilfs2: prevent WARNING in nilfs_sufile_set_segment_usage()

2023-12-13T15:46:16Z

commit 675abf8df1353e0e3bde314993e0796c524cfbf0 upstream. If nilfs2 reads a disk image with corrupted segment usage metadata, and its segment usage information is marked as an error for the segment at the write location, nilfs_sufile_set_segment_usage() can trigger WARN_ONs during log writing. Segments newly allocated for writing with nilfs_sufile_alloc() will not have this error flag set, but this unexpected situation will occur if the segment indexed by either nilfs->ns_segnum or nilfs->ns_nextnum (active segment) was marked in error. Fix this issue by inserting a sanity check to treat it as a file system corruption. Since error returns are not allowed during the execution phase where nilfs_sufile_set_segment_usage() is used, this inserts the sanity check into nilfs_sufile_mark_dirty() which pre-reads the buffer containing the segment usage record to be updated and sets it up in a dirty state for writing. In addition, nilfs_sufile_set_segment_usage() is also called when canceling log writing and undoing segment usage update, so in order to avoid issuing the same kernel warning in that case, in case of cancellation, avoid checking the error flag in nilfs_sufile_set_segment_usage(). Link: https://lkml.kernel.org/r/20231205085947.4431-1-konishi.ryusuke@gmail.com Signed-off-by: Ryusuke Konishi Reported-by: syzbot+14e9f834f6ddecece094@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=14e9f834f6ddecece094 Tested-by: Ryusuke Konishi Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

btrfs: send: ensure send_fd is writable

2023-12-08T07:42:00Z

commit 0ac1d13a55eb37d398b63e6ff6db4a09a2c9128c upstream. kernel_write() requires the caller to ensure that the file is writable. Let's do that directly after looking up the ->send_fd. We don't need a separate bailout path because the "out" path already does fput() if ->send_filp is non-NULL. This has no security impact for two reasons: - the ioctl requires CAP_SYS_ADMIN - __kernel_write() bails out on read-only files - but only since 5.8, see commit a01ac27be472 ("fs: check FMODE_WRITE in __kernel_write") Reported-and-tested-by: syzbot+12e098239d20385264d3@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=12e098239d20385264d3 Fixes: 31db9f7c23fb ("Btrfs: introduce BTRFS_IOC_SEND for btrfs send/receive") CC: stable@vger.kernel.org # 4.14+ Signed-off-by: Jann Horn Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman

btrfs: fix off-by-one when checking chunk map includes logical address

2023-12-08T07:42:00Z

commit 5fba5a571858ce2d787fdaf55814e42725bfa895 upstream. At btrfs_get_chunk_map() we get the extent map for the chunk that contains the given logical address stored in the 'logical' argument. Then we do sanity checks to verify the extent map contains the logical address. One of these checks verifies if the extent map covers a range with an end offset behind the target logical address - however this check has an off-by-one error since it will consider an extent map whose start offset plus its length matches the target logical address as inclusive, while the fact is that the last byte it covers is behind the target logical address (by 1). So fix this condition by using '<=' rather than '<' when comparing the extent map's "start + length" against the target logical address. CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Josef Bacik Signed-off-by: Filipe Manana Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman

ext4: remove gdb backup copy for meta bg in setup_new_flex_group_blocks

2023-11-28T16:45:45Z

commit 40dd7953f4d606c280074f10d23046b6812708ce upstream. Wrong check of gdb backup in meta bg as following: first_group is the first group of meta_bg which contains target group, so target group is always >= first_group. We check if target group has gdb backup by comparing first_group with [group + 1] and [group + EXT4_DESC_PER_BLOCK(sb) - 1]. As group >= first_group, then [group + N] is > first_group. So no copy of gdb backup in meta bg is done in setup_new_flex_group_blocks. No need to do gdb backup copy in meta bg from setup_new_flex_group_blocks as we always copy updated gdb block to backups at end of ext4_flex_group_add as following: ext4_flex_group_add /* no gdb backup copy for meta bg any more */ setup_new_flex_group_blocks /* update current group number */ ext4_update_super sbi->s_groups_count += flex_gd->count; /* * if group in meta bg contains backup is added, the primary gdb block * of the meta bg will be copy to backup in new added group here. */ for (; gdb_num <= gdb_num_end; gdb_num++) update_backups(...) In summary, we can remove wrong gdb backup copy code in setup_new_flex_group_blocks. Signed-off-by: Kemeng Shi Reviewed-by: Theodore Ts'o Link: https://lore.kernel.org/r/20230826174712.4059355-5-shikemeng@huaweicloud.com Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman

ext4: correct return value of ext4_convert_meta_bg

2023-11-28T16:45:45Z

commit 48f1551592c54f7d8e2befc72a99ff4e47f7dca0 upstream. Avoid to ignore error in "err". Signed-off-by: Kemeng Shi Link: https://lore.kernel.org/r/20230826174712.4059355-4-shikemeng@huaweicloud.com Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman

ext4: correct offset of gdb backup in non meta_bg group to update_backups

2023-11-28T16:45:45Z

commit 31f13421c004a420c0e9d288859c9ea9259ea0cc upstream. Commit 0aeaa2559d6d5 ("ext4: fix corruption when online resizing a 1K bigalloc fs") found that primary superblock's offset in its group is not equal to offset of backup superblock in its group when block size is 1K and bigalloc is enabled. As group descriptor blocks are right after superblock, we can't pass block number of gdb to update_backups for the same reason. The root casue of the issue above is that leading 1K padding block is count as data block offset for primary block while backup block has no padding block offset in its group. Remove padding data block count to fix the issue for gdb backups. For meta_bg case, update_backups treat blk_off as block number, do no conversion in this case. Signed-off-by: Kemeng Shi Reviewed-by: Theodore Ts'o Link: https://lore.kernel.org/r/20230826174712.4059355-2-shikemeng@huaweicloud.com Signed-off-by: Theodore Ts'o Cc: stable@kernel.org Signed-off-by: Greg Kroah-Hartman

ext4: apply umask if ACL support is disabled

2023-11-28T16:45:45Z

commit 484fd6c1de13b336806a967908a927cc0356e312 upstream. The function ext4_init_acl() calls posix_acl_create() which is responsible for applying the umask. But without CONFIG_EXT4_FS_POSIX_ACL, ext4_init_acl() is an empty inline function, and nobody applies the umask. This fixes a bug which causes the umask to be ignored with O_TMPFILE on ext4: https://github.com/MusicPlayerDaemon/MPD/issues/558 https://bugs.gentoo.org/show_bug.cgi?id=686142#c3 https://bugzilla.kernel.org/show_bug.cgi?id=203625 Reviewed-by: "J. Bruce Fields" Cc: stable@vger.kernel.org Signed-off-by: Max Kellermann Link: https://lore.kernel.org/r/20230919081824.1096619-1-max.kellermann@ionos.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman

jbd2: fix potential data lost in recovering journal raced with synchronizing fs bdev

2023-11-28T16:45:45Z

commit 61187fce8600e8ef90e601be84f9d0f3222c1206 upstream. JBD2 makes sure journal data is fallen on fs device by sync_blockdev(), however, other process could intercept the EIO information from bdev's mapping, which leads journal recovering successful even EIO occurs during data written back to fs device. We found this problem in our product, iscsi + multipath is chosen for block device of ext4. Unstable network may trigger kpartx to rescan partitions in device mapper layer. Detailed process is shown as following: mount kpartx irq jbd2_journal_recover do_one_pass memcpy(nbh->b_data, obh->b_data) // copy data to fs dev from journal mark_buffer_dirty // mark bh dirty vfs_read generic_file_read_iter // dio filemap_write_and_wait_range __filemap_fdatawrite_range do_writepages block_write_full_folio submit_bh_wbc >> EIO occurs in disk << end_buffer_async_write mark_buffer_write_io_error mapping_set_error set_bit(AS_EIO, &mapping->flags) // set! filemap_check_errors test_and_clear_bit(AS_EIO, &mapping->flags) // clear! err2 = sync_blockdev filemap_write_and_wait filemap_check_errors test_and_clear_bit(AS_EIO, &mapping->flags) // false err2 = 0 Filesystem is mounted successfully even data from journal is failed written into disk, and ext4/ocfs2 could become corrupted. Fix it by comparing the wb_err state in fs block device before recovering and after recovering. A reproducer can be found in the kernel bugzilla referenced below. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217888 Cc: stable@vger.kernel.org Signed-off-by: Zhihao Cheng Signed-off-by: Zhang Yi Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20230919012525.1783108-1-chengzhihao1@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Greg Kroah-Hartman