user/sven/linux.git/fs, branch v5.4.198

cifs: return errors during session setup during reconnects

2022-06-14T16:12:02Z

commit 8ea21823aa584b55ba4b861307093b78054b0c1b upstream. During reconnects, we check the return value from cifs_negotiate_protocol, and have handlers for both success and failures. But if that passes, and cifs_setup_session returns any errors other than -EACCES, we do not handle that. This fix adds a handler for that, so that we don't go ahead and try a tree_connect on a failed session. Signed-off-by: Shyam Prasad N Reviewed-by: Enzo Matsumiya Cc: stable@vger.kernel.org Signed-off-by: Steve French Signed-off-by: Greg Kroah-Hartman

cifs: version operations for smb20 unneeded when legacy support disabled

2022-06-14T16:12:01Z

[ Upstream commit 7ef93ffccd55fb0ba000ed16ef6a81cd7dee07b5 ] We should not be including unused smb20 specific code when legacy support is disabled (CONFIG_CIFS_ALLOW_INSECURE_LEGACY turned off). For example smb2_operations and smb2_values aren't used in that case. Over time we can move more and more SMB1/CIFS and SMB2.0 code into the insecure legacy ifdefs Reviewed-by: Ronnie Sahlberg Signed-off-by: Steve French Signed-off-by: Sasha Levin

ceph: allow ceph.dir.rctime xattr to be updatable

2022-06-14T16:12:01Z

[ Upstream commit d7a2dc523085f8b8c60548ceedc696934aefeb0e ] `rctime' has been a pain point in cephfs due to its buggy nature - inconsistent values reported and those sorts. Fixing rctime is non-trivial needing an overall redesign of the entire nested statistics infrastructure. As a workaround, PR http://github.com/ceph/ceph/pull/37938 allows this extended attribute to be manually set. This allows users to "fixup" inconsistent rctime values. While this sounds messy, its probably the wisest approach allowing users/scripts to workaround buggy rctime values. The above PR enables Ceph MDS to allow manually setting rctime extended attribute with the corresponding user-land changes. We may as well allow the same to be done via kclient for parity. Signed-off-by: Venky Shankar Reviewed-by: Xiubo Li Signed-off-by: Ilya Dryomov Signed-off-by: Sasha Levin

kernfs: Separate kernfs_pr_cont_buf and rename_lock.

2022-06-14T16:12:00Z

[ Upstream commit 1a702dc88e150487c9c173a249b3d236498b9183 ] Previously the protection of kernfs_pr_cont_buf was piggy backed by rename_lock, which means that pr_cont() needs to be protected under rename_lock. This can cause potential circular lock dependencies. If there is an OOM, we have the following call hierarchy: -> cpuset_print_current_mems_allowed() -> pr_cont_cgroup_name() -> pr_cont_kernfs_name() pr_cont_kernfs_name() will grab rename_lock and call printk. So we have the following lock dependencies: kernfs_rename_lock -> console_sem Sometimes, printk does a wakeup before releasing console_sem, which has the dependence chain: console_sem -> p->pi_lock -> rq->lock Now, imagine one wants to read cgroup_name under rq->lock, for example, printing cgroup_name in a tracepoint in the scheduler code. They will be holding rq->lock and take rename_lock: rq->lock -> kernfs_rename_lock Now they will deadlock. A prevention to this circular lock dependency is to separate the protection of pr_cont_buf from rename_lock. In principle, rename_lock is to protect the integrity of cgroup name when copying to buf. Once pr_cont_buf has got its content, rename_lock can be dropped. So it's safe to drop rename_lock after kernfs_name_locked (and kernfs_path_from_node_locked) and rely on a dedicated pr_cont_lock to protect pr_cont_buf. Acked-by: Tejun Heo Signed-off-by: Hao Luo Link: https://lore.kernel.org/r/20220516190951.3144144-1-haoluo@google.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

NFSv4: Don't hold the layoutget locks across multiple RPC calls

2022-06-14T16:11:57Z

[ Upstream commit 6949493884fe88500de4af182588e071cf1544ee ] When doing layoutget as part of the open() compound, we have to be careful to release the layout locks before we can call any further RPC calls, such as setattr(). The reason is that those calls could trigger a recall, which could deadlock. Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin

f2fs: remove WARN_ON in f2fs_is_valid_blkaddr

2022-06-14T16:11:56Z

[ Upstream commit dc2f78e2d4cc844a1458653d57ce1b54d4a29f21 ] Syzbot triggers two WARNs in f2fs_is_valid_blkaddr and __is_bitmap_valid. For example, in f2fs_is_valid_blkaddr, if type is DATA_GENERIC_ENHANCE or DATA_GENERIC_ENHANCE_READ, it invokes WARN_ON if blkaddr is not in the right range. The call trace is as follows: f2fs_get_node_info+0x45f/0x1070 read_node_page+0x577/0x1190 __get_node_page.part.0+0x9e/0x10e0 __get_node_page f2fs_get_node_page+0x109/0x180 do_read_inode f2fs_iget+0x2a5/0x58b0 f2fs_fill_super+0x3b39/0x7ca0 Fix these two WARNs by replacing WARN_ON with dump_stack. Reported-by: syzbot+763ae12a2ede1d99d4dc@syzkaller.appspotmail.com Signed-off-by: Dongliang Mu Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin

afs: Fix infinite loop found by xfstest generic/676

2022-06-14T16:11:55Z

[ Upstream commit 17eabd42560f4636648ad65ba5b20228071e2363 ] In AFS, a directory is handled as a file that the client downloads and parses locally for the purposes of performing lookup and getdents operations. The in-kernel afs filesystem has a number of functions that do this. A directory file is arranged as a series of 2K blocks divided into 32-byte slots, where a directory entry occupies one or more slots, plus each block starts with one or more metadata blocks. When parsing a block, if the last slots are occupied by a dirent that occupies more than a single slot and the file position points at a slot that's not the initial one, the logic in afs_dir_iterate_block() that skips over it won't advance the file pointer to the end of it. This will cause an infinite loop in getdents() as it will keep retrying that block and failing to advance beyond the final entry. Fix this by advancing the file pointer if the next entry will be beyond it when we skip a block. This was found by the generic/676 xfstest but can also be triggered with something like: ~/xfstests-dev/src/t_readdir_3 /xfstest.test/z 4000 1 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: David Howells Reviewed-by: Marc Dionne Tested-by: Marc Dionne cc: linux-afs@lists.infradead.org Link: http://lore.kernel.org/r/165391973497.110268.2939296942213894166.stgit@warthog.procyon.org.uk/ Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

jffs2: fix memory leak in jffs2_do_fill_super

2022-06-14T16:11:55Z

[ Upstream commit c14adb1cf70a984ed081c67e9d27bc3caad9537c ] If jffs2_iget() or d_make_root() in jffs2_do_fill_super() returns an error, we can observe the following kmemleak report: -------------------------------------------- unreferenced object 0xffff888105a65340 (size 64): comm "mount", pid 710, jiffies 4302851558 (age 58.239s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [] kmem_cache_alloc_trace+0x475/0x8a0 [] jffs2_sum_init+0x96/0x1a0 [] jffs2_do_mount_fs+0x745/0x2120 [] jffs2_do_fill_super+0x35c/0x810 [] jffs2_fill_super+0x2b9/0x3b0 [...] unreferenced object 0xffff8881bd7f0000 (size 65536): comm "mount", pid 710, jiffies 4302851558 (age 58.239s) hex dump (first 32 bytes): bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb bb ................ backtrace: [] kmalloc_order+0xda/0x110 [] kmalloc_order_trace+0x21/0x130 [] __kmalloc+0x711/0x8a0 [] jffs2_sum_init+0xd9/0x1a0 [] jffs2_do_mount_fs+0x745/0x2120 [] jffs2_do_fill_super+0x35c/0x810 [] jffs2_fill_super+0x2b9/0x3b0 [...] -------------------------------------------- This is because the resources allocated in jffs2_sum_init() are not released. Call jffs2_sum_exit() to release these resources to solve the problem. Fixes: e631ddba5887 ("[JFFS2] Add erase block summary support (mount time improvement)") Signed-off-by: Baokun Li Signed-off-by: Richard Weinberger Signed-off-by: Sasha Levin

ocfs2: dlmfs: fix error handling of user_dlm_destroy_lock

2022-06-14T16:11:46Z

commit 863e0d81b6683c4cbc588ad831f560c90e494bef upstream. When user_dlm_destroy_lock failed, it didn't clean up the flags it set before exit. For USER_LOCK_IN_TEARDOWN, if this function fails because of lock is still in used, next time when unlink invokes this function, it will return succeed, and then unlink will remove inode and dentry if lock is not in used(file closed), but the dlm lock is still linked in dlm lock resource, then when bast come in, it will trigger a panic due to user-after-free. See the following panic call trace. To fix this, USER_LOCK_IN_TEARDOWN should be reverted if fail. And also error should be returned if USER_LOCK_IN_TEARDOWN is set to let user know that unlink fail. For the case of ocfs2_dlm_unlock failure, besides USER_LOCK_IN_TEARDOWN, USER_LOCK_BUSY is also required to be cleared. Even though spin lock is released in between, but USER_LOCK_IN_TEARDOWN is still set, for USER_LOCK_BUSY, if before every place that waits on this flag, USER_LOCK_IN_TEARDOWN is checked to bail out, that will make sure no flow waits on the busy flag set by user_dlm_destroy_lock(), then we can simplely revert USER_LOCK_BUSY when ocfs2_dlm_unlock fails. Fix user_dlm_cluster_lock() which is the only function not following this. [ 941.336392] (python,26174,16):dlmfs_unlink:562 ERROR: unlink 004fb0000060000b5a90b8c847b72e1, error -16 from destroy [ 989.757536] ------------[ cut here ]------------ [ 989.757709] kernel BUG at fs/ocfs2/dlmfs/userdlm.c:173! [ 989.757876] invalid opcode: 0000 [#1] SMP [ 989.758027] Modules linked in: ksplice_2zhuk2jr_ib_ipoib_new(O) ksplice_2zhuk2jr(O) mptctl mptbase xen_netback xen_blkback xen_gntalloc xen_gntdev xen_evtchn cdc_ether usbnet mii ocfs2 jbd2 rpcsec_gss_krb5 auth_rpcgss nfsv4 nfsv3 nfs_acl nfs fscache lockd grace ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm ocfs2_nodemanager ocfs2_stackglue configfs bnx2fc fcoe libfcoe libfc scsi_transport_fc sunrpc ipmi_devintf bridge stp llc rds_rdma rds bonding ib_sdp ib_ipoib rdma_ucm ib_ucm ib_uverbs ib_umad rdma_cm ib_cm iw_cm falcon_lsm_serviceable(PE) falcon_nf_netcontain(PE) mlx4_vnic falcon_kal(E) falcon_lsm_pinned_13402(E) mlx4_ib ib_sa ib_mad ib_core ib_addr xenfs xen_privcmd dm_multipath iTCO_wdt iTCO_vendor_support pcspkr sb_edac edac_core i2c_i801 lpc_ich mfd_core ipmi_ssif i2c_core ipmi_si ipmi_msghandler [ 989.760686] ioatdma sg ext3 jbd mbcache sd_mod ahci libahci ixgbe dca ptp pps_core vxlan udp_tunnel ip6_udp_tunnel megaraid_sas mlx4_core crc32c_intel be2iscsi bnx2i cnic uio cxgb4i cxgb4 cxgb3i libcxgbi ipv6 cxgb3 mdio libiscsi_tcp qla4xxx iscsi_boot_sysfs libiscsi scsi_transport_iscsi wmi dm_mirror dm_region_hash dm_log dm_mod [last unloaded: ksplice_2zhuk2jr_ib_ipoib_old] [ 989.761987] CPU: 10 PID: 19102 Comm: dlm_thread Tainted: P OE 4.1.12-124.57.1.el6uek.x86_64 #2 [ 989.762290] Hardware name: Oracle Corporation ORACLE SERVER X5-2/ASM,MOTHERBOARD,1U, BIOS 30350100 06/17/2021 [ 989.762599] task: ffff880178af6200 ti: ffff88017f7c8000 task.ti: ffff88017f7c8000 [ 989.762848] RIP: e030:[] [] __user_dlm_queue_lockres.part.4+0x76/0x80 [ocfs2_dlmfs] [ 989.763185] RSP: e02b:ffff88017f7cbcb8 EFLAGS: 00010246 [ 989.763353] RAX: 0000000000000000 RBX: ffff880174d48008 RCX: 0000000000000003 [ 989.763565] RDX: 0000000000120012 RSI: 0000000000000003 RDI: ffff880174d48170 [ 989.763778] RBP: ffff88017f7cbcc8 R08: ffff88021f4293b0 R09: 0000000000000000 [ 989.763991] R10: ffff880179c8c000 R11: 0000000000000003 R12: ffff880174d48008 [ 989.764204] R13: 0000000000000003 R14: ffff880179c8c000 R15: ffff88021db7a000 [ 989.764422] FS: 0000000000000000(0000) GS:ffff880247480000(0000) knlGS:ffff880247480000 [ 989.764685] CS: e033 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 989.764865] CR2: ffff8000007f6800 CR3: 0000000001ae0000 CR4: 0000000000042660 [ 989.765081] Stack: [ 989.765167] 0000000000000003 ffff880174d48040 ffff88017f7cbd18 ffffffffc07d455f [ 989.765442] ffff88017f7cbd88 ffffffff816fb639 ffff88017f7cbd38 ffff8800361b5600 [ 989.765717] ffff88021db7a000 ffff88021f429380 0000000000000003 ffffffffc0453020 [ 989.765991] Call Trace: [ 989.766093] [] user_bast+0x5f/0xf0 [ocfs2_dlmfs] [ 989.766287] [] ? schedule_timeout+0x169/0x2d0 [ 989.766475] [] ? o2dlm_lock_ast_wrapper+0x20/0x20 [ocfs2_stack_o2cb] [ 989.766738] [] o2dlm_blocking_ast_wrapper+0x1a/0x20 [ocfs2_stack_o2cb] [ 989.767010] [] dlm_do_local_bast+0x46/0xe0 [ocfs2_dlm] [ 989.767217] [] ? dlm_lockres_calc_usage+0x4c/0x60 [ocfs2_dlm] [ 989.767466] [] dlm_thread+0xa31/0x1140 [ocfs2_dlm] [ 989.767662] [] ? __schedule+0x24a/0x810 [ 989.767834] [] ? __schedule+0x23e/0x810 [ 989.768006] [] ? __schedule+0x24a/0x810 [ 989.768178] [] ? __schedule+0x23e/0x810 [ 989.768349] [] ? __schedule+0x24a/0x810 [ 989.768521] [] ? __schedule+0x23e/0x810 [ 989.768693] [] ? __schedule+0x24a/0x810 [ 989.768893] [] ? __schedule+0x23e/0x810 [ 989.769067] [] ? __schedule+0x24a/0x810 [ 989.769241] [] ? wait_woken+0x90/0x90 [ 989.769411] [] ? dlm_kick_thread+0x80/0x80 [ocfs2_dlm] [ 989.769617] [] kthread+0xcb/0xf0 [ 989.769774] [] ? __schedule+0x24a/0x810 [ 989.769945] [] ? __schedule+0x24a/0x810 [ 989.770117] [] ? kthread_create_on_node+0x180/0x180 [ 989.770321] [] ret_from_fork+0x61/0x90 [ 989.770492] [] ? kthread_create_on_node+0x180/0x180 [ 989.770689] Code: d0 00 00 00 f0 45 7d c0 bf 00 20 00 00 48 89 83 c0 00 00 00 48 89 83 c8 00 00 00 e8 55 c1 8c c0 83 4b 04 10 48 83 c4 08 5b 5d c3 <0f> 0b 0f 1f 84 00 00 00 00 00 55 48 89 e5 41 55 41 54 53 48 83 [ 989.771892] RIP [] __user_dlm_queue_lockres.part.4+0x76/0x80 [ocfs2_dlmfs] [ 989.772174] RSP [ 989.772704] ---[ end trace ebd1e38cebcc93a8 ]--- [ 989.772907] Kernel panic - not syncing: Fatal exception [ 989.773173] Kernel Offset: disabled Link: https://lkml.kernel.org/r/20220518235224.87100-2-junxiao.bi@oracle.com Signed-off-by: Junxiao Bi Reviewed-by: Joseph Qi Cc: Mark Fasheh Cc: Joel Becker Cc: Joseph Qi Cc: Changwei Ge Cc: Gang He Cc: Jun Piao Cc: Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman

dlm: fix missing lkb refcount handling

2022-06-14T16:11:46Z

commit 1689c169134f4b5a39156122d799b7dca76d8ddb upstream. We always call hold_lkb(lkb) if we increment lkb->lkb_wait_count. So, we always need to call unhold_lkb(lkb) if we decrement lkb->lkb_wait_count. This patch will add missing unhold_lkb(lkb) if we decrement lkb->lkb_wait_count. In case of setting lkb->lkb_wait_count to zero we need to countdown until reaching zero and call unhold_lkb(lkb). The waiters list unhold_lkb(lkb) can be removed because it's done for the last lkb_wait_count decrement iteration as it's done in _remove_from_waiters(). This issue was discovered by a dlm gfs2 test case which use excessively dlm_unlock(LKF_CANCEL) feature. Probably the lkb->lkb_wait_count value never reached above 1 if this feature isn't used and so it was not discovered before. The testcase ended in a rsb on the rsb keep data structure with a refcount of 1 but no lkb was associated with it, which is itself an invalid behaviour. A side effect of that was a condition in which the dlm was sending remove messages in a looping behaviour. With this patch that has not been reproduced. Cc: stable@vger.kernel.org Signed-off-by: Alexander Aring Signed-off-by: David Teigland Signed-off-by: Greg Kroah-Hartman