user/sven/linux.git/fs, branch v5.4.70

ep_create_wakeup_source(): dentry name can change under you...

2020-10-07T06:01:31Z

commit 3701cb59d892b88d569427586f01491552f377b1 upstream. or get freed, for that matter, if it's a long (separately stored) name. Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman

epoll: EPOLL_CTL_ADD: close the race in decision to take fast path

2020-10-07T06:01:30Z

commit fe0a916c1eae8e17e86c3753d13919177d63ed7e upstream. Checking for the lack of epitems refering to the epoll we want to insert into is not enough; we might have an insertion of that epoll into another one that has already collected the set of files to recheck for excessive reverse paths, but hasn't gotten to creating/inserting the epitem for it. However, any such insertion in progress can be detected - it will update the generation count in our epoll when it's done looking through it for files to check. That gets done under ->mtx of our epoll and that allows us to detect that safely. We are *not* holding epmutex here, so the generation count is not stable. However, since both the update of ep->gen by loop check and (later) insertion into ->f_ep_link are done with ep->mtx held, we are fine - the sequence is grab epmutex bump loop_check_gen ... grab tep->mtx // 1 tep->gen = loop_check_gen ... drop tep->mtx // 2 ... grab tep->mtx // 3 ... insert into ->f_ep_link ... drop tep->mtx // 4 bump loop_check_gen drop epmutex and if the fastpath check in another thread happens for that eventpoll, it can come * before (1) - in that case fastpath is just fine * after (4) - we'll see non-empty ->f_ep_link, slow path taken * between (2) and (3) - loop_check_gen is stable, with ->mtx providing barriers and we end up taking slow path. Note that ->f_ep_link emptiness check is slightly racy - we are protected against insertions into that list, but removals can happen right under us. Not a problem - in the worst case we'll end up taking a slow path for no good reason. Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman

epoll: replace ->visited/visited_list with generation count

2020-10-07T06:01:30Z

commit 18306c404abe18a0972587a6266830583c60c928 upstream. removes the need to clear it, along with the races. Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman

epoll: do not insert into poll queues until all sanity checks are done

2020-10-07T06:01:30Z

commit f8d4f44df056c5b504b0d49683fb7279218fd207 upstream. Signed-off-by: Al Viro Signed-off-by: Greg Kroah-Hartman

nfs: Fix security label length not being reset

2020-10-07T06:01:28Z

[ Upstream commit d33030e2ee3508d65db5644551435310df86010e ] nfs_readdir_page_filler() iterates over entries in a directory, reusing the same security label buffer, but does not reset the buffer's length. This causes decode_attr_security_label() to return -ERANGE if an entry's security label is longer than the previous one's. This error, in nfs4_decode_dirent(), only gets passed up as -EAGAIN, which causes another failed attempt to copy into the buffer. The second error is ignored and the remaining entries do not show up in ls, specifically the getdents64() syscall. Reproduce by creating multiple files in NFS and giving one of the later files a longer security label. ls will not see that file nor any that are added afterwards, though they will exist on the backend. In nfs_readdir_page_filler(), reset security label buffer length before every reuse Signed-off-by: Jeffrey Mitchell Fixes: b4487b935452 ("nfs: Fix getxattr kernel panic and memory overflow") Signed-off-by: Trond Myklebust Signed-off-by: Sasha Levin

fuse: fix the ->direct_IO() treatment of iov_iter

2020-10-07T06:01:26Z

[ Upstream commit 933a3752babcf6513117d5773d2b70782d6ad149 ] the callers rely upon having any iov_iter_truncate() done inside ->direct_IO() countered by iov_iter_reexpand(). Reported-by: Qian Cai Tested-by: Qian Cai Signed-off-by: Al Viro Signed-off-by: Sasha Levin

xfs: trim IO to found COW extent limit

2020-10-07T06:01:24Z

A bug existed in the XFS reflink code between v5.1 and v5.5 in which the mapping for a COW IO was not trimmed to the mapping of the COW extent that was found. This resulted in a too-short copy, and corruption of other files which shared the original extent. (This happened only when extent size hints were set, which bypasses delalloc and led to this code path.) This was (inadvertently) fixed upstream with 36adcbace24e "xfs: fill out the srcmap in iomap_begin" and related patches which moved lots of this functionality to the iomap subsystem. Hence, this is a -stable only patch, targeted to fix this corruption vector without other major code changes. Fixes: 78f0cc9d55cb ("xfs: don't use delalloc extents for COW on files with extsize hints") Cc: # 5.4.x Signed-off-by: Eric Sandeen Reviewed-by: Darrick J. Wong Reviewed-by: Christoph Hellwig Signed-off-by: Sasha Levin

btrfs: fix filesystem corruption after a device replace

2020-10-07T06:01:23Z

commit 4c8f353272dd1262013873990c0fafd0e3c8f274 upstream. We use a device's allocation state tree to track ranges in a device used for allocated chunks, and we set ranges in this tree when allocating a new chunk. However after a device replace operation, we were not setting the allocated ranges in the new device's allocation state tree, so that tree is empty after a device replace. This means that a fitrim operation after a device replace will trim the device ranges that have allocated chunks and extents, as we trim every range for which there is not a range marked in the device's allocation state tree. It is also important during chunk allocation, since the device's allocation state is used to determine if a range is already allocated when allocating a new chunk. This is trivial to reproduce and the following script triggers the bug: $ cat reproducer.sh #!/bin/bash DEV1="/dev/sdg" DEV2="/dev/sdh" DEV3="/dev/sdi" wipefs -a $DEV1 $DEV2 $DEV3 &> /dev/null # Create a raid1 test fs on 2 devices. mkfs.btrfs -f -m raid1 -d raid1 $DEV1 $DEV2 > /dev/null mount $DEV1 /mnt/btrfs xfs_io -f -c "pwrite -S 0xab 0 10M" /mnt/btrfs/foo echo "Starting to replace $DEV1 with $DEV3" btrfs replace start -B $DEV1 $DEV3 /mnt/btrfs echo echo "Running fstrim" fstrim /mnt/btrfs echo echo "Unmounting filesystem" umount /mnt/btrfs echo "Mounting filesystem in degraded mode using $DEV3 only" wipefs -a $DEV1 $DEV2 &> /dev/null mount -o degraded $DEV3 /mnt/btrfs if [ $? -ne 0 ]; then dmesg | tail echo echo "Failed to mount in degraded mode" exit 1 fi echo echo "File foo data (expected all bytes = 0xab):" od -A d -t x1 /mnt/btrfs/foo umount /mnt/btrfs When running the reproducer: $ ./replace-test.sh wrote 10485760/10485760 bytes at offset 0 10 MiB, 2560 ops; 0.0901 sec (110.877 MiB/sec and 28384.5216 ops/sec) Starting to replace /dev/sdg with /dev/sdi Running fstrim Unmounting filesystem Mounting filesystem in degraded mode using /dev/sdi only mount: /mnt/btrfs: wrong fs type, bad option, bad superblock on /dev/sdi, missing codepage or helper program, or other error. [19581.748641] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi started [19581.803842] BTRFS info (device sdg): dev_replace from /dev/sdg (devid 1) to /dev/sdi finished [19582.208293] BTRFS info (device sdi): allowing degraded mounts [19582.208298] BTRFS info (device sdi): disk space caching is enabled [19582.208301] BTRFS info (device sdi): has skinny extents [19582.212853] BTRFS warning (device sdi): devid 2 uuid 1f731f47-e1bb-4f00-bfbb-9e5a0cb4ba9f is missing [19582.213904] btree_readpage_end_io_hook: 25839 callbacks suppressed [19582.213907] BTRFS error (device sdi): bad tree block start, want 30490624 have 0 [19582.214780] BTRFS warning (device sdi): failed to read root (objectid=7): -5 [19582.231576] BTRFS error (device sdi): open_ctree failed Failed to mount in degraded mode So fix by setting all allocated ranges in the replace target device when the replace operation is finishing, when we are holding the chunk mutex and we can not race with new chunk allocations. A test case for fstests follows soon. Fixes: 1c11b63eff2a67 ("btrfs: replace pending/pinned chunks lists with io tree") CC: stable@vger.kernel.org # 5.2+ Reviewed-by: Nikolay Borisov Reviewed-by: Johannes Thumshirn Signed-off-by: Filipe Manana Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman

btrfs: fix overflow when copying corrupt csums for a message

2020-10-01T11:18:24Z

commit 35be8851d172c6e3db836c0f28c19087b10c9e00 upstream. Syzkaller reported a buffer overflow in btree_readpage_end_io_hook() when loop mounting a crafted image: detected buffer overflow in memcpy ------------[ cut here ]------------ kernel BUG at lib/string.c:1129! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 26 Comm: kworker/u4:2 Not tainted 5.9.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: btrfs-endio-meta btrfs_work_helper RIP: 0010:fortify_panic+0xf/0x20 lib/string.c:1129 RSP: 0018:ffffc90000e27980 EFLAGS: 00010286 RAX: 0000000000000022 RBX: ffff8880a80dca64 RCX: 0000000000000000 RDX: ffff8880a90860c0 RSI: ffffffff815dba07 RDI: fffff520001c4f22 RBP: ffff8880a80dca00 R08: 0000000000000022 R09: ffff8880ae7318e7 R10: 0000000000000000 R11: 0000000000077578 R12: 00000000ffffff6e R13: 0000000000000008 R14: ffffc90000e27a40 R15: 1ffff920001c4f3c FS: 0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000557335f440d0 CR3: 000000009647d000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: memcpy include/linux/string.h:405 [inline] btree_readpage_end_io_hook.cold+0x206/0x221 fs/btrfs/disk-io.c:642 end_bio_extent_readpage+0x4de/0x10c0 fs/btrfs/extent_io.c:2854 bio_endio+0x3cf/0x7f0 block/bio.c:1449 end_workqueue_fn+0x114/0x170 fs/btrfs/disk-io.c:1695 btrfs_work_helper+0x221/0xe20 fs/btrfs/async-thread.c:318 process_one_work+0x94c/0x1670 kernel/workqueue.c:2269 worker_thread+0x64c/0x1120 kernel/workqueue.c:2415 kthread+0x3b5/0x4a0 kernel/kthread.c:292 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 Modules linked in: ---[ end trace b68924293169feef ]--- RIP: 0010:fortify_panic+0xf/0x20 lib/string.c:1129 RSP: 0018:ffffc90000e27980 EFLAGS: 00010286 RAX: 0000000000000022 RBX: ffff8880a80dca64 RCX: 0000000000000000 RDX: ffff8880a90860c0 RSI: ffffffff815dba07 RDI: fffff520001c4f22 RBP: ffff8880a80dca00 R08: 0000000000000022 R09: ffff8880ae7318e7 R10: 0000000000000000 R11: 0000000000077578 R12: 00000000ffffff6e R13: 0000000000000008 R14: ffffc90000e27a40 R15: 1ffff920001c4f3c FS: 0000000000000000(0000) GS:ffff8880ae700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f95b7c4d008 CR3: 000000009647d000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 The overflow happens, because in btree_readpage_end_io_hook() we assume that we have found a 4 byte checksum instead of the real possible 32 bytes we have for the checksums. With the fix applied: [ 35.726623] BTRFS: device fsid 815caf9a-dc43-4d2a-ac54-764b8333d765 devid 1 transid 5 /dev/loop0 scanned by syz-repro (215) [ 35.738994] BTRFS info (device loop0): disk space caching is enabled [ 35.738998] BTRFS info (device loop0): has skinny extents [ 35.743337] BTRFS warning (device loop0): loop0 checksum verify failed on 1052672 wanted 0xf9c035fc8d239a54 found 0x67a25c14b7eabcf9 level 0 [ 35.743420] BTRFS error (device loop0): failed to read chunk root [ 35.745899] BTRFS error (device loop0): open_ctree failed Reported-by: syzbot+e864a35d361e1d4e29a5@syzkaller.appspotmail.com Fixes: d5178578bcd4 ("btrfs: directly call into crypto framework for checksumming") CC: stable@vger.kernel.org # 5.4+ Signed-off-by: Johannes Thumshirn Signed-off-by: David Sterba Signed-off-by: Greg Kroah-Hartman

btrfs: qgroup: fix data leak caused by race between writeback and truncate

2020-10-01T11:18:10Z

[ Upstream commit fa91e4aa1716004ea8096d5185ec0451e206aea0 ] [BUG] When running tests like generic/013 on test device with btrfs quota enabled, it can normally lead to data leak, detected at unmount time: BTRFS warning (device dm-3): qgroup 0/5 has unreleased space, type 0 rsv 4096 ------------[ cut here ]------------ WARNING: CPU: 11 PID: 16386 at fs/btrfs/disk-io.c:4142 close_ctree+0x1dc/0x323 [btrfs] RIP: 0010:close_ctree+0x1dc/0x323 [btrfs] Call Trace: btrfs_put_super+0x15/0x17 [btrfs] generic_shutdown_super+0x72/0x110 kill_anon_super+0x18/0x30 btrfs_kill_super+0x17/0x30 [btrfs] deactivate_locked_super+0x3b/0xa0 deactivate_super+0x40/0x50 cleanup_mnt+0x135/0x190 __cleanup_mnt+0x12/0x20 task_work_run+0x64/0xb0 __prepare_exit_to_usermode+0x1bc/0x1c0 __syscall_return_slowpath+0x47/0x230 do_syscall_64+0x64/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ---[ end trace caf08beafeca2392 ]--- BTRFS error (device dm-3): qgroup reserved space leaked [CAUSE] In the offending case, the offending operations are: 2/6: writev f2X[269 1 0 0 0 0] [1006997,67,288] 0 2/7: truncate f2X[269 1 0 0 48 1026293] 18388 0 The following sequence of events could happen after the writev(): CPU1 (writeback) | CPU2 (truncate) ----------------------------------------------------------------- btrfs_writepages() | |- extent_write_cache_pages() | |- Got page for 1003520 | | 1003520 is Dirty, no writeback | | So (!clear_page_dirty_for_io()) | | gets called for it | |- Now page 1003520 is Clean. | | | btrfs_setattr() | | |- btrfs_setsize() | | |- truncate_setsize() | | New i_size is 18388 |- __extent_writepage() | | |- page_offset() > i_size | |- btrfs_invalidatepage() | |- Page is clean, so no qgroup | callback executed This means, the qgroup reserved data space is not properly released in btrfs_invalidatepage() as the page is Clean. [FIX] Instead of checking the dirty bit of a page, call btrfs_qgroup_free_data() unconditionally in btrfs_invalidatepage(). As qgroup rsv are completely bound to the QGROUP_RESERVED bit of io_tree, not bound to page status, thus we won't cause double freeing anyway. Fixes: 0b34c261e235 ("btrfs: qgroup: Prevent qgroup->reserved from going subzero") CC: stable@vger.kernel.org # 4.14+ Reviewed-by: Josef Bacik Signed-off-by: Qu Wenruo Signed-off-by: David Sterba Signed-off-by: Sasha Levin