user/sven/linux.git/include/acpi, branch v4.14.186

x86: ACPI: fix CPU hotplug deadlock

2020-04-24T06:01:20Z

[ Upstream commit 696ac2e3bf267f5a2b2ed7d34e64131f2287d0ad ] Similar to commit 0266d81e9bf5 ("acpi/processor: Prevent cpu hotplug deadlock") except this is for acpi_processor_ffh_cstate_probe(): "The problem is that the work is scheduled on the current CPU from the hotplug thread associated with that CPU. It's not required to invoke these functions via the workqueue because the hotplug thread runs on the target CPU already. Check whether current is a per cpu thread pinned on the target CPU and invoke the function directly to avoid the workqueue." WARNING: possible circular locking dependency detected ------------------------------------------------------ cpuhp/1/15 is trying to acquire lock: ffffc90003447a28 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: __flush_work+0x4c6/0x630 but task is already holding lock: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x3e/0xc0 irq_calc_affinity_vectors+0x5f/0x91 __pci_enable_msix_range+0x10f/0x9a0 pci_alloc_irq_vectors_affinity+0x13e/0x1f0 pci_alloc_irq_vectors_affinity at drivers/pci/msi.c:1208 pqi_ctrl_init+0x72f/0x1618 [smartpqi] pqi_pci_probe.cold.63+0x882/0x892 [smartpqi] local_pci_probe+0x7a/0xc0 work_for_cpu_fn+0x2e/0x50 process_one_work+0x57e/0xb90 worker_thread+0x363/0x5b0 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 -> #0 ((work_completion)(&wfc.work)){+.+.}-{0:0}: __lock_acquire+0x2244/0x32a0 lock_acquire+0x1a2/0x680 __flush_work+0x4e6/0x630 work_on_cpu+0x114/0x160 acpi_processor_ffh_cstate_probe+0x129/0x250 acpi_processor_evaluate_cst+0x4c8/0x580 acpi_processor_get_power_info+0x86/0x740 acpi_processor_hotplug+0xc3/0x140 acpi_soft_cpu_online+0x102/0x1d0 cpuhp_invoke_callback+0x197/0x1120 cpuhp_thread_fun+0x252/0x2f0 smpboot_thread_fn+0x255/0x440 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 other info that might help us debug this: Chain exists of: (work_completion)(&wfc.work) --> cpuhp_state-up --> cpuidle_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpuidle_lock); lock(cpuhp_state-up); lock(cpuidle_lock); lock((work_completion)(&wfc.work)); *** DEADLOCK *** 3 locks held by cpuhp/1/15: #0: ffffffffaf51ab10 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0 #1: ffffffffaf51ad40 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0 #2: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20 Call Trace: dump_stack+0xa0/0xea print_circular_bug.cold.52+0x147/0x14c check_noncircular+0x295/0x2d0 __lock_acquire+0x2244/0x32a0 lock_acquire+0x1a2/0x680 __flush_work+0x4e6/0x630 work_on_cpu+0x114/0x160 acpi_processor_ffh_cstate_probe+0x129/0x250 acpi_processor_evaluate_cst+0x4c8/0x580 acpi_processor_get_power_info+0x86/0x740 acpi_processor_hotplug+0xc3/0x140 acpi_soft_cpu_online+0x102/0x1d0 cpuhp_invoke_callback+0x197/0x1120 cpuhp_thread_fun+0x252/0x2f0 smpboot_thread_fn+0x255/0x440 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 Signed-off-by: Qian Cai Tested-by: Borislav Petkov [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro

2020-03-11T17:02:48Z

commit 1dade3a7048ccfc675650cd2cf13d578b095e5fb upstream. Sometimes it is useful to find the access_width field value in bytes and not in bits so add a helper that can be used for this purpose. Suggested-by: Jean Delvare Signed-off-by: Mika Westerberg Reviewed-by: Jean Delvare Cc: 4.16+ # 4.16+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPICA: Reference Counts: increase max to 0x4000 for large servers

2019-03-19T12:13:21Z

commit 8b23570ab001c1982c8a068cde468ff067255314 upstream. Increase the reference count limit to 0x4000 as the current one is not sufficient for some large server systems. Reviewed-by: Dimitri Sivanich Tested-by: Russ Anderson Reported-by: Mike Travis Signed-off-by: Mike Travis Signed-off-by: Erik Schmauss [ rjw: Changelog ] Signed-off-by: Rafael J. Wysocki Cc: Frank van der Linden Signed-off-by: Greg Kroah-Hartman

ACPI / EC: Fix regression related to PM ops support in ECDT device

2017-12-05T10:26:33Z

commit a64a62ce9a380213dc9e192f762266d70c9b40ec upstream. On platforms (ASUS X550ZE and possibly all ASUS X series) with valid ECDT EC but invalid DSDT EC, EC PM ops won't be invoked as ECDT EC is not an ACPI device. Thus the following commit actually removed post-resume acpi_ec_enable_event() invocation for such platforms, and triggered a regression on them that after being resumed, EC (actually should be ECDT) driver stops handling EC events: Commit: c2b46d679b30c5c0d7eb47a21085943242bdd8dc Subject: ACPI / EC: Add PM operations to improve event handling for resume process Notice that the root cause actually is "ECDT is not an ACPI device" rather than "the timing of acpi_ec_enable_event() invocation", this patch fixes this issue by enumerating ECDT EC as an ACPI device. Due to the existence of the noirq stage, the ability of tuning the timing of acpi_ec_enable_event() invocation is still meaningful. This patch is a little bit different from the posted fix by moving acpi_config_boot_ec() from acpi_ec_ecdt_start() to acpi_ec_add() to make sure that EC event handling won't be stopped as long as the ACPI EC driver is bound. Thus the following sequence shouldn't disable EC event handling: unbind,suspend,resume,bind. Fixes: c2b46d679b30 (ACPI / EC: Add PM operations to improve event handling for resume process) Link: https://bugzilla.kernel.org/show_bug.cgi?id=196847 Reported-by: Luya Tshimbalanga Tested-by: Luya Tshimbalanga Signed-off-by: Lv Zheng Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

ACPI / bus: Make ACPI_HANDLE() work for non-GPL code again

2017-09-19T20:42:31Z

Due to commit db3e50f3234b (device property: Get rid of struct fwnode_handle type field), ACPI_HANDLE() inadvertently became a GPL-only call. The call path that led to that was: ACPI_HANDLE() ACPI_COMPANION() to_acpi_device_node() is_acpi_device_node() acpi_device_fwnode_ops DECLARE_ACPI_FWNODE_OPS(acpi_device_fwnode_ops); ...and the new DECLARE_ACPI_FWNODE_OPS() includes EXPORT_SYMBOL_GPL, whereas previously it was a static struct. In order to avoid changing any of that, let's instead provide ever so slightly better encapsulation of those struct fwnode_operations instances. Those do not really need to be directly used in inline function calls in header files. Simply moving two small functions (is_acpi_device_node and is_acpi_data_node) out of acpi_bus.h, and into a .c file, does that. That leaves the internals of struct fwnode_operations as GPL-only (which I think was the intent all along), but un-breaks any driver code out there that relies on the ACPI subsystem's being (historically) an EXPORT_SYMBOL-usable system. By that, I mean, ACPI_HANDLE() and other basic ACPI calls were non-GPL-protected. Also, while I'm there, remove a tiny bit of redundancy that was missed in the earlier commit, by having is_acpi_node() use the other two routines, instead of checking fwnode directly. Fixes: db3e50f3234b (device property: Get rid of struct fwnode_handle type field) Signed-off-by: John Hubbard Acked-by: Sakari Ailus Acked-by: Mika Westerberg Signed-off-by: Rafael J. Wysocki

Merge tag 'devprop-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2017-09-05T19:50:00Z

Pull device properties framework updates from Rafael Wysocki: "These introduce fwnode operations for all of the separate types of 'firmware nodes' that can be handled by the device properties framework, make the framework use const fwnode arguments all over, add a helper for the consolidated handling of node references and switch over the framework to the new UUID API. Specifics: - Introduce fwnode operations for all of the separate types of 'firmware nodes' that can be handled by the device properties framework and drop the type field from struct fwnode_handle (Sakari Ailus, Arnd Bergmann). - Make the device properties framework use const fwnode arguments where possible (Sakari Ailus). - Add a helper for the consolidated handling of node references to the device properties framework (Sakari Ailus). - Switch over the ACPI part of the device properties framework to the new UUID API (Andy Shevchenko)" * tag 'devprop-4.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: device property: Switch to use new generic UUID API device property: export irqchip_fwnode_ops device property: Introduce fwnode_property_get_reference_args device property: Constify fwnode property API device property: Constify argument to pset fwnode backend ACPI: Constify internal fwnode arguments ACPI: Constify acpi_bus helper functions, switch to macros ACPI: Prepare for constifying acpi_get_next_subnode() fwnode argument device property: Get rid of struct fwnode_handle type field ACPI: Use IS_ERR_OR_NULL() instead of non-NULL check in is_acpi_data_node()

Merge branches 'acpi-sysfs', 'acpi-apei' and 'acpi-blacklist'

2017-09-03T21:55:34Z

* acpi-sysfs: ACPI / sysfs: Extend ACPI sysfs to provide access to boot error region * acpi-apei: ACPI / APEI: Suppress message if HEST not present ACPI, APEI, EINJ: Subtract any matching Register Region from Trigger resources ACPI: APEI: fix the wrong iteration of generic error status block ACPI: APEI: Enable APEI multiple GHES source to share a single external IRQ * acpi-blacklist: intel_pstate: convert to use acpi_match_platform_list() ACPI / blacklist: add acpi_match_platform_list()

Merge branches 'acpi-ec', 'acpi-dma', 'acpi-processor' and 'acpi-cppc'

2017-09-03T21:53:39Z

* acpi-ec: ACPI / EC: Clean up EC GPE mask flag ACPI: EC: Fix possible issues related to EC initialization order * acpi-dma: ACPI/IORT: Add IORT named component memory address limits ACPI: Make acpi_dma_configure() DMA regions aware ACPI: Introduce DMA ranges parsing ACPI: Make acpi_dev_get_resources() method agnostic * acpi-processor: ACPI / processor: make function acpi_processor_check_duplicates() static ACPI: processor: use dev_dbg() instead of dev_warn() when CPPC probe failed * acpi-cppc: mailbox: pcc: Drop uninformative output during boot

Merge branches 'acpi-scan' and 'acpi-pm'

2017-09-03T21:53:19Z

* acpi-scan: ACPI / scan: Enable GPEs before scanning the namespace ACPICA: Make it possible to enable runtime GPEs earlier ACPICA: Dispatch active GPEs at init time * acpi-pm: ACPI / PM: Add debug statements to acpi_pm_notify_handler() ACPI: Add debug statements to acpi_global_event_handler() ACPI / sleep: Make acpi_sleep_syscore_init() static ACPI / PCI / PM: Rework acpi_pci_propagate_wakeup() ACPI / PM: Split acpi_device_wakeup() PCI / PM: Skip bridges in pci_enable_wake()