user/sven/linux.git/include/acpi, branch v5.4.130

ACPI: scan: Use unique number for instance_no

2021-03-30T12:35:28Z

[ Upstream commit eb50aaf960e3bedfef79063411ffd670da94b84b ] The decrementation of acpi_device_bus_id->instance_no in acpi_device_del() is incorrect, because it may cause a duplicate instance number to be allocated next time a device with the same acpi_device_bus_id is added. Replace above mentioned approach by using IDA framework. While at it, define the instance range to be [0, 4096). Fixes: e49bd2dd5a50 ("ACPI: use PNPID:instance_no as bus_id of ACPI device") Fixes: ca9dc8d42b30 ("ACPI / scan: Fix acpi_bus_id_list bookkeeping") Signed-off-by: Andy Shevchenko Cc: 4.10+ # 4.10+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

ACPICA: Fix exception code class checks

2021-03-04T09:26:14Z

[ Upstream commit 3dfaea3811f8b6a89a347e8da9ab862cdf3e30fe ] ACPICA commit 1a3a549286ea9db07d7ec700e7a70dd8bcc4354e The macros to classify different AML exception codes are broken. For instance, ACPI_ENV_EXCEPTION(Status) will always evaluate to zero due to #define AE_CODE_ENVIRONMENTAL 0x0000 #define ACPI_ENV_EXCEPTION(Status) (Status & AE_CODE_ENVIRONMENTAL) Similarly, ACPI_AML_EXCEPTION(Status) will evaluate to a non-zero value for error codes of type AE_CODE_PROGRAMMER, AE_CODE_ACPI_TABLES, as well as AE_CODE_AML, and not just AE_CODE_AML as the name suggests. This commit fixes those checks. Fixes: d46b6537f0ce ("ACPICA: AML Parser: ignore all exceptions resulting from incorrect AML during table load") Link: https://github.com/acpica/acpica/commit/1a3a5492 Signed-off-by: Maximilian Luz Signed-off-by: Bob Moore Signed-off-by: Erik Kaneda Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

PM: ACPI: PCI: Drop acpi_pm_set_bridge_wakeup()

2020-12-30T10:51:32Z

commit 7482c5cb90e5a7f9e9e12dd154d405e0219656e3 upstream. The idea behind acpi_pm_set_bridge_wakeup() was to allow bridges to be reference counted for wakeup enabling, because they may be enabled to signal wakeup on behalf of their subordinate devices and that may happen for multiple times in a row, whereas for the other devices it only makes sense to enable wakeup signaling once. However, this becomes problematic if the bridge itself is suspended, because it is treated as a "regular" device in that case and the reference counting doesn't work. For instance, suppose that there are two devices below a bridge and they both can signal wakeup. Every time one of them is suspended, wakeup signaling is enabled for the bridge, so when they both have been suspended, the bridge's wakeup reference counter value is 2. Say that the bridge is suspended subsequently and acpi_pci_wakeup() is called for it. Because the bridge can signal wakeup, that function will invoke acpi_pm_set_device_wakeup() to configure it and __acpi_pm_set_device_wakeup() will be called with the last argument equal to 1. This causes __acpi_device_wakeup_enable() invoked by it to omit the reference counting, because the reference counter of the target device (the bridge) is 2 at that time. Now say that the bridge resumes and one of the device below it resumes too, so the bridge's reference counter becomes 0 and wakeup signaling is disabled for it, but there is still the other suspended device which may need the bridge to signal wakeup on its behalf and that is not going to work. To address this scenario, use wakeup enable reference counting for all devices, not just for bridges, so drop the last argument from __acpi_device_wakeup_enable() and __acpi_pm_set_device_wakeup(), which causes acpi_pm_set_device_wakeup() and acpi_pm_set_bridge_wakeup() to become identical, so drop the latter and use the former instead of it everywhere. Fixes: 1ba51a7c1496 ("ACPI / PCI / PM: Rework acpi_pci_propagate_wakeup()") Signed-off-by: Rafael J. Wysocki Reviewed-by: Mika Westerberg Acked-by: Bjorn Helgaas Cc: 4.14+ # 4.14+ Signed-off-by: Greg Kroah-Hartman

x86: ACPI: fix CPU hotplug deadlock

2020-04-23T08:36:38Z

[ Upstream commit 696ac2e3bf267f5a2b2ed7d34e64131f2287d0ad ] Similar to commit 0266d81e9bf5 ("acpi/processor: Prevent cpu hotplug deadlock") except this is for acpi_processor_ffh_cstate_probe(): "The problem is that the work is scheduled on the current CPU from the hotplug thread associated with that CPU. It's not required to invoke these functions via the workqueue because the hotplug thread runs on the target CPU already. Check whether current is a per cpu thread pinned on the target CPU and invoke the function directly to avoid the workqueue." WARNING: possible circular locking dependency detected ------------------------------------------------------ cpuhp/1/15 is trying to acquire lock: ffffc90003447a28 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: __flush_work+0x4c6/0x630 but task is already holding lock: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x3e/0xc0 irq_calc_affinity_vectors+0x5f/0x91 __pci_enable_msix_range+0x10f/0x9a0 pci_alloc_irq_vectors_affinity+0x13e/0x1f0 pci_alloc_irq_vectors_affinity at drivers/pci/msi.c:1208 pqi_ctrl_init+0x72f/0x1618 [smartpqi] pqi_pci_probe.cold.63+0x882/0x892 [smartpqi] local_pci_probe+0x7a/0xc0 work_for_cpu_fn+0x2e/0x50 process_one_work+0x57e/0xb90 worker_thread+0x363/0x5b0 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 -> #0 ((work_completion)(&wfc.work)){+.+.}-{0:0}: __lock_acquire+0x2244/0x32a0 lock_acquire+0x1a2/0x680 __flush_work+0x4e6/0x630 work_on_cpu+0x114/0x160 acpi_processor_ffh_cstate_probe+0x129/0x250 acpi_processor_evaluate_cst+0x4c8/0x580 acpi_processor_get_power_info+0x86/0x740 acpi_processor_hotplug+0xc3/0x140 acpi_soft_cpu_online+0x102/0x1d0 cpuhp_invoke_callback+0x197/0x1120 cpuhp_thread_fun+0x252/0x2f0 smpboot_thread_fn+0x255/0x440 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 other info that might help us debug this: Chain exists of: (work_completion)(&wfc.work) --> cpuhp_state-up --> cpuidle_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpuidle_lock); lock(cpuhp_state-up); lock(cpuidle_lock); lock((work_completion)(&wfc.work)); *** DEADLOCK *** 3 locks held by cpuhp/1/15: #0: ffffffffaf51ab10 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0 #1: ffffffffaf51ad40 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0 #2: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20 Call Trace: dump_stack+0xa0/0xea print_circular_bug.cold.52+0x147/0x14c check_noncircular+0x295/0x2d0 __lock_acquire+0x2244/0x32a0 lock_acquire+0x1a2/0x680 __flush_work+0x4e6/0x630 work_on_cpu+0x114/0x160 acpi_processor_ffh_cstate_probe+0x129/0x250 acpi_processor_evaluate_cst+0x4c8/0x580 acpi_processor_get_power_info+0x86/0x740 acpi_processor_hotplug+0xc3/0x140 acpi_soft_cpu_online+0x102/0x1d0 cpuhp_invoke_callback+0x197/0x1120 cpuhp_thread_fun+0x252/0x2f0 smpboot_thread_fn+0x255/0x440 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 Signed-off-by: Qian Cai Tested-by: Borislav Petkov [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE

2020-04-17T08:50:09Z

commit 0ce792d660bda990c675eaf14ce09594a9b85cbf upstream. The check carried out by acpi_any_gpe_status_set() is not precise enough for the suspend-to-idle implementation in Linux and in some cases it is necessary make it skip one GPE (specifically, the EC GPE) from the check to prevent a race condition leading to a premature system resume from occurring. For this reason, redefine acpi_any_gpe_status_set() to take the number of a GPE to skip as an argument. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206629 Tested-by: Ondřej Caletka Cc: 5.4+ # 5.4+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro

2020-03-05T15:43:42Z

commit 1dade3a7048ccfc675650cd2cf13d578b095e5fb upstream. Sometimes it is useful to find the access_width field value in bytes and not in bits so add a helper that can be used for this purpose. Suggested-by: Jean Delvare Signed-off-by: Mika Westerberg Reviewed-by: Jean Delvare Cc: 4.16+ # 4.16+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI: PM: s2idle: Check fixed wakeup events in acpi_s2idle_wake()

2020-02-28T16:22:20Z

commit 63fb9623427fbb44e3782233b6e4714057b76ff2 upstream. Commit fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system") overlooked the fact that fixed events can wake up the system too and broke RTC wakeup from suspend-to-idle as a result. Fix this issue by checking the fixed events in acpi_s2idle_wake() in addition to checking wakeup GPEs and break out of the suspend-to-idle loop if the status bits of any enabled fixed events are set then. Fixes: fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system") Reported-and-tested-by: Chris Wilson Cc: 5.4+ # 5.4+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

ACPICA: Introduce acpi_any_gpe_status_set()

2020-02-19T18:52:57Z

commit ea128834dd76f9a72a35d011c651fa96658f06a7 upstream. Introduce a new helper function, acpi_any_gpe_status_set(), for checking the status bits of all enabled GPEs in one go. It is needed to distinguish spurious SCIs from genuine ones when deciding whether or not to wake up the system from suspend-to-idle. Cc: 5.4+ # 5.4+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI / utils: Move acpi_dev_get_first_match_dev() under CONFIG_ACPI

2019-12-17T18:56:29Z

commit a814dcc269830c9dbb8a83731cfc6fc5dd787f8d upstream. We have a stub defined for the acpi_dev_get_first_match_dev() in acpi.h for the case when CONFIG_ACPI=n. Moreover, acpi_dev_put(), counterpart function, is already placed under CONFIG_ACPI. Thus, move acpi_dev_get_first_match_dev() under CONFIG_ACPI as well. Fixes: 817b4d64da03 ("ACPI / utils: Introduce acpi_dev_get_first_match_dev() helper") Reported-by: kbuild test robot Signed-off-by: Andy Shevchenko Reviewed-by: Mika Westerberg Cc: 5.2+ # 5.2+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

cpufreq: Use per-policy frequency QoS

2019-10-21T00:05:21Z

Replace the CPU device PM QoS used for the management of min and max frequency constraints in cpufreq (and its users) with per-policy frequency QoS to avoid problems with cpufreq policies covering more then one CPU. Namely, a cpufreq driver is registered with the subsys interface which calls cpufreq_add_dev() for each CPU, starting from CPU0, so currently the PM QoS notifiers are added to the first CPU in the policy (i.e. CPU0 in the majority of cases). In turn, when the cpufreq driver is unregistered, the subsys interface doing that calls cpufreq_remove_dev() for each CPU, starting from CPU0, and the PM QoS notifiers are only removed when cpufreq_remove_dev() is called for the last CPU in the policy, say CPUx, which as a rule is not CPU0 if the policy covers more than one CPU. Then, the PM QoS notifiers cannot be removed, because CPUx does not have them, and they are still there in the device PM QoS notifiers list of CPU0, which prevents new PM QoS notifiers from being registered for CPU0 on the next attempt to register the cpufreq driver. The same issue occurs when the first CPU in the policy goes offline before unregistering the driver. After this change it does not matter which CPU is the policy CPU at the driver registration time and whether or not it is online all the time, because the frequency QoS is per policy and not per CPU. Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework") Reported-by: Dmitry Osipenko Tested-by: Dmitry Osipenko Reported-by: Sudeep Holla Tested-by: Sudeep Holla Diagnosed-by: Viresh Kumar Link: https://lore.kernel.org/linux-pm/5ad2624194baa2f53acc1f1e627eb7684c577a19.1562210705.git.viresh.kumar@linaro.org/T/#md2d89e95906b8c91c15f582146173dce2e86e99f Link: https://lore.kernel.org/linux-pm/20191017094612.6tbkwoq4harsjcqv@vireshk-i7/T/#m30d48cc23b9a80467fbaa16e30f90b3828a5a29b Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar