user/sven/linux.git/include/acpi, branch v5.4.68

x86: ACPI: fix CPU hotplug deadlock

2020-04-23T08:36:38Z

[ Upstream commit 696ac2e3bf267f5a2b2ed7d34e64131f2287d0ad ] Similar to commit 0266d81e9bf5 ("acpi/processor: Prevent cpu hotplug deadlock") except this is for acpi_processor_ffh_cstate_probe(): "The problem is that the work is scheduled on the current CPU from the hotplug thread associated with that CPU. It's not required to invoke these functions via the workqueue because the hotplug thread runs on the target CPU already. Check whether current is a per cpu thread pinned on the target CPU and invoke the function directly to avoid the workqueue." WARNING: possible circular locking dependency detected ------------------------------------------------------ cpuhp/1/15 is trying to acquire lock: ffffc90003447a28 ((work_completion)(&wfc.work)){+.+.}-{0:0}, at: __flush_work+0x4c6/0x630 but task is already holding lock: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x3e/0xc0 irq_calc_affinity_vectors+0x5f/0x91 __pci_enable_msix_range+0x10f/0x9a0 pci_alloc_irq_vectors_affinity+0x13e/0x1f0 pci_alloc_irq_vectors_affinity at drivers/pci/msi.c:1208 pqi_ctrl_init+0x72f/0x1618 [smartpqi] pqi_pci_probe.cold.63+0x882/0x892 [smartpqi] local_pci_probe+0x7a/0xc0 work_for_cpu_fn+0x2e/0x50 process_one_work+0x57e/0xb90 worker_thread+0x363/0x5b0 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 -> #0 ((work_completion)(&wfc.work)){+.+.}-{0:0}: __lock_acquire+0x2244/0x32a0 lock_acquire+0x1a2/0x680 __flush_work+0x4e6/0x630 work_on_cpu+0x114/0x160 acpi_processor_ffh_cstate_probe+0x129/0x250 acpi_processor_evaluate_cst+0x4c8/0x580 acpi_processor_get_power_info+0x86/0x740 acpi_processor_hotplug+0xc3/0x140 acpi_soft_cpu_online+0x102/0x1d0 cpuhp_invoke_callback+0x197/0x1120 cpuhp_thread_fun+0x252/0x2f0 smpboot_thread_fn+0x255/0x440 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 other info that might help us debug this: Chain exists of: (work_completion)(&wfc.work) --> cpuhp_state-up --> cpuidle_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(cpuidle_lock); lock(cpuhp_state-up); lock(cpuidle_lock); lock((work_completion)(&wfc.work)); *** DEADLOCK *** 3 locks held by cpuhp/1/15: #0: ffffffffaf51ab10 (cpu_hotplug_lock){++++}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0 #1: ffffffffaf51ad40 (cpuhp_state-up){+.+.}-{0:0}, at: cpuhp_thread_fun+0x69/0x2f0 #2: ffffffffafa1c0e8 (cpuidle_lock){+.+.}-{3:3}, at: cpuidle_pause_and_lock+0x17/0x20 Call Trace: dump_stack+0xa0/0xea print_circular_bug.cold.52+0x147/0x14c check_noncircular+0x295/0x2d0 __lock_acquire+0x2244/0x32a0 lock_acquire+0x1a2/0x680 __flush_work+0x4e6/0x630 work_on_cpu+0x114/0x160 acpi_processor_ffh_cstate_probe+0x129/0x250 acpi_processor_evaluate_cst+0x4c8/0x580 acpi_processor_get_power_info+0x86/0x740 acpi_processor_hotplug+0xc3/0x140 acpi_soft_cpu_online+0x102/0x1d0 cpuhp_invoke_callback+0x197/0x1120 cpuhp_thread_fun+0x252/0x2f0 smpboot_thread_fn+0x255/0x440 kthread+0x1f4/0x220 ret_from_fork+0x27/0x50 Signed-off-by: Qian Cai Tested-by: Borislav Petkov [ rjw: Subject ] Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin

ACPICA: Allow acpi_any_gpe_status_set() to skip one GPE

2020-04-17T08:50:09Z

commit 0ce792d660bda990c675eaf14ce09594a9b85cbf upstream. The check carried out by acpi_any_gpe_status_set() is not precise enough for the suspend-to-idle implementation in Linux and in some cases it is necessary make it skip one GPE (specifically, the EC GPE) from the check to prevent a race condition leading to a premature system resume from occurring. For this reason, redefine acpi_any_gpe_status_set() to take the number of a GPE to skip as an argument. Link: https://bugzilla.kernel.org/show_bug.cgi?id=206629 Tested-by: Ondřej Caletka Cc: 5.4+ # 5.4+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPICA: Introduce ACPI_ACCESS_BYTE_WIDTH() macro

2020-03-05T15:43:42Z

commit 1dade3a7048ccfc675650cd2cf13d578b095e5fb upstream. Sometimes it is useful to find the access_width field value in bytes and not in bits so add a helper that can be used for this purpose. Suggested-by: Jean Delvare Signed-off-by: Mika Westerberg Reviewed-by: Jean Delvare Cc: 4.16+ # 4.16+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI: PM: s2idle: Check fixed wakeup events in acpi_s2idle_wake()

2020-02-28T16:22:20Z

commit 63fb9623427fbb44e3782233b6e4714057b76ff2 upstream. Commit fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system") overlooked the fact that fixed events can wake up the system too and broke RTC wakeup from suspend-to-idle as a result. Fix this issue by checking the fixed events in acpi_s2idle_wake() in addition to checking wakeup GPEs and break out of the suspend-to-idle loop if the status bits of any enabled fixed events are set then. Fixes: fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system") Reported-and-tested-by: Chris Wilson Cc: 5.4+ # 5.4+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

ACPICA: Introduce acpi_any_gpe_status_set()

2020-02-19T18:52:57Z

commit ea128834dd76f9a72a35d011c651fa96658f06a7 upstream. Introduce a new helper function, acpi_any_gpe_status_set(), for checking the status bits of all enabled GPEs in one go. It is needed to distinguish spurious SCIs from genuine ones when deciding whether or not to wake up the system from suspend-to-idle. Cc: 5.4+ # 5.4+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

ACPI / utils: Move acpi_dev_get_first_match_dev() under CONFIG_ACPI

2019-12-17T18:56:29Z

commit a814dcc269830c9dbb8a83731cfc6fc5dd787f8d upstream. We have a stub defined for the acpi_dev_get_first_match_dev() in acpi.h for the case when CONFIG_ACPI=n. Moreover, acpi_dev_put(), counterpart function, is already placed under CONFIG_ACPI. Thus, move acpi_dev_get_first_match_dev() under CONFIG_ACPI as well. Fixes: 817b4d64da03 ("ACPI / utils: Introduce acpi_dev_get_first_match_dev() helper") Reported-by: kbuild test robot Signed-off-by: Andy Shevchenko Reviewed-by: Mika Westerberg Cc: 5.2+ # 5.2+ Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman

cpufreq: Use per-policy frequency QoS

2019-10-21T00:05:21Z

Replace the CPU device PM QoS used for the management of min and max frequency constraints in cpufreq (and its users) with per-policy frequency QoS to avoid problems with cpufreq policies covering more then one CPU. Namely, a cpufreq driver is registered with the subsys interface which calls cpufreq_add_dev() for each CPU, starting from CPU0, so currently the PM QoS notifiers are added to the first CPU in the policy (i.e. CPU0 in the majority of cases). In turn, when the cpufreq driver is unregistered, the subsys interface doing that calls cpufreq_remove_dev() for each CPU, starting from CPU0, and the PM QoS notifiers are only removed when cpufreq_remove_dev() is called for the last CPU in the policy, say CPUx, which as a rule is not CPU0 if the policy covers more than one CPU. Then, the PM QoS notifiers cannot be removed, because CPUx does not have them, and they are still there in the device PM QoS notifiers list of CPU0, which prevents new PM QoS notifiers from being registered for CPU0 on the next attempt to register the cpufreq driver. The same issue occurs when the first CPU in the policy goes offline before unregistering the driver. After this change it does not matter which CPU is the policy CPU at the driver registration time and whether or not it is online all the time, because the frequency QoS is per policy and not per CPU. Fixes: 67d874c3b2c6 ("cpufreq: Register notifiers with the PM QoS framework") Reported-by: Dmitry Osipenko Tested-by: Dmitry Osipenko Reported-by: Sudeep Holla Tested-by: Sudeep Holla Diagnosed-by: Viresh Kumar Link: https://lore.kernel.org/linux-pm/5ad2624194baa2f53acc1f1e627eb7684c577a19.1562210705.git.viresh.kumar@linaro.org/T/#md2d89e95906b8c91c15f582146173dce2e86e99f Link: https://lore.kernel.org/linux-pm/20191017094612.6tbkwoq4harsjcqv@vireshk-i7/T/#m30d48cc23b9a80467fbaa16e30f90b3828a5a29b Signed-off-by: Rafael J. Wysocki Acked-by: Viresh Kumar

Merge tag 'acpi-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2019-09-18T02:31:36Z

Pull ACPI updates from Rafael Wysocki: "These include an ACPICA update (to upstream revision 20190816), improvements of support for memory hot-add in the HMAT handling code and some assorted fixes and cleanups. Specifics: - Update the ACPICA code in the kernel to upstream revision 20190816 including: * Internal limits change to support larger systems (Bob Moore). * Macros clean up (Bob Moore). * printf format string fixes (Bob Moore). * Full deployment of the ACPI_PRINTF_LIKE macro (Bob Moore). * Tools improvements (Bob Moore, Colin Ian King). * Windows _OSI support fixes (Jung-uk Kim). - Improve memory hot-add support in the ACPI HMAT handling code (Dan Williams, Keith Busch). - Fix the ACPI LPSS (Low-Power Subsystem) driver for Intel SoCs to save and restore private registers during system-wide suspend and resume on systems with the Lynxpoint PCH (Jarkko Nikula). - Convert the ACPI documentation related to LEDs to ReST (Sakari Ailus). - Fix assorted issues and make assorted minor improvements in the ACPI-related code (Al Stone, Andy Shevchenko, Jiri Slaby, Kelsey Skunberg, Krzysztof Wilczynski, Liguang Zhang, Wenwen Wang, YueHaibing)" * tag 'acpi-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits) ACPI / PCI: fix acpi_pci_irq_enable() memory leak ACPI: custom_method: fix memory leaks ACPI: thermal: Remove redundant acpi_has_method() calls ACPI / CPPC: do not require the _PSD method ACPI: SBS: remove unused const variable 'SMBUS_PEC' ACPI / LPSS: Save/restore LPSS private registers also on Lynxpoint ACPI/PCI: Remove surplus parentheses from a return statement ACPICA: Update version to 20190816. ACPICA: Add "Windows 2019" string to _OSI support. ACPICA: Differentiate Windows 8.1 from Windows 8. ACPICA: Fully deploy ACPI_PRINTF_LIKE macro ACPICA: iASL,acpi_dump: Improve y/n query ACPICA: Fix issues with arg types within printf format strings ACPICA: Macros: remove pointer math on a null pointer ACPICA: Increase total number of possible Owner IDs ACPICA: Debugger: remove redundant assignment on obj_desc Documentation: ACPI: DSD: Convert LED documentation to ReST ACPI / APEI: Release resources if gen_pool_add() fails HMAT: Skip publishing target info for nodes with no online memory HMAT: Register attributes for memory hot add ...

Merge branch 'pm-cpufreq'

2019-09-17T07:44:29Z

* pm-cpufreq: (36 commits) cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist cpufreq: qcom: Add support for qcs404 on nvmem driver cpufreq: qcom: Refactor the driver to make it easier to extend cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain Documentation: cpufreq: Update policy notifier documentation cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events sched/cpufreq: Align trace event behavior of fast switching ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier video: pxafb: Remove cpufreq policy notifier video: sa1100fb: Remove cpufreq policy notifier arch_topology: Use CPUFREQ_CREATE_POLICY instead of CPUFREQ_NOTIFY cpufreq: powerpc_cbe: Switch to QoS requests for freq limits cpufreq: powerpc: macintosh: Switch to QoS requests for freq limits cpufreq: Print driver name if cpufreq_suspend() fails cpufreq: mediatek: Add support for mt8183 cpufreq: mediatek: change to regulator_get_optional cpufreq: imx-cpufreq-dt: Add i.MX8MN support cpufreq: Use imx-cpufreq-dt for i.MX8MN's speed grading ...

ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier

2019-08-28T09:21:53Z

The cpufreq core now takes the min/max frequency constraints via QoS requests and the CPUFREQ_ADJUST notifier shall get removed later on. Switch over to using the QoS request for maximum frequency constraint for acpi driver. Signed-off-by: Viresh Kumar Signed-off-by: Rafael J. Wysocki