user/sven/linux.git/include/asm-generic/pgtable.h, branch v4.14.53

asm-generic: provide generic_pmdp_establish()

2018-04-26T09:02:14Z

[ Upstream commit c58f0bb77ed8bf93dfdde762b01cb67eebbdfc29 ] Patch series "Do not lose dirty bit on THP pages", v4. Vlastimil noted that pmdp_invalidate() is not atomic and we can lose dirty and access bits if CPU sets them after pmdp dereference, but before set_pmd_at(). The bug can lead to data loss, but the race window is tiny and I haven't seen any reports that suggested that it happens in reality. So I don't think it worth sending it to stable. Unfortunately, there's no way to address the issue in a generic way. We need to fix all architectures that support THP one-by-one. All architectures that have THP supported have to provide atomic pmdp_invalidate() that returns previous value. If generic implementation of pmdp_invalidate() is used, architecture needs to provide atomic pmdp_estabish(). pmdp_estabish() is not used out-side generic implementation of pmdp_invalidate() so far, but I think this can change in the future. This patch (of 12): This is an implementation of pmdp_establish() that is only suitable for an architecture that doesn't have hardware dirty/accessed bits. In this case we can't race with CPU which sets these bits and non-atomic approach is fine. Link: http://lkml.kernel.org/r/20171213105756.69879-2-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov Cc: Vlastimil Babka Cc: Andrea Arcangeli Cc: Michal Hocko Cc: Aneesh Kumar K.V Cc: Catalin Marinas Cc: David Daney Cc: David Miller Cc: H. Peter Anvin Cc: Hugh Dickins Cc: Ingo Molnar Cc: Martin Schwidefsky Cc: Nitin Gupta Cc: Ralf Baechle Cc: Thomas Gleixner Cc: Vineet Gupta Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

mm/vmalloc: add interfaces to free unmapped page table

2018-03-28T16:24:38Z

commit b6bdb7517c3d3f41f20e5c2948d6bc3f8897394e upstream. On architectures with CONFIG_HAVE_ARCH_HUGE_VMAP set, ioremap() may create pud/pmd mappings. A kernel panic was observed on arm64 systems with Cortex-A75 in the following steps as described by Hanjun Guo. 1. ioremap a 4K size, valid page table will build, 2. iounmap it, pte0 will set to 0; 3. ioremap the same address with 2M size, pgd/pmd is unchanged, then set the a new value for pmd; 4. pte0 is leaked; 5. CPU may meet exception because the old pmd is still in TLB, which will lead to kernel panic. This panic is not reproducible on x86. INVLPG, called from iounmap, purges all levels of entries associated with purged address on x86. x86 still has memory leak. The patch changes the ioremap path to free unmapped page table(s) since doing so in the unmap path has the following issues: - The iounmap() path is shared with vunmap(). Since vmap() only supports pte mappings, making vunmap() to free a pte page is an overhead for regular vmap users as they do not need a pte page freed up. - Checking if all entries in a pte page are cleared in the unmap path is racy, and serializing this check is expensive. - The unmap path calls free_vmap_area_noflush() to do lazy TLB purges. Clearing a pud/pmd entry before the lazy TLB purges needs extra TLB purge. Add two interfaces, pud_free_pmd_page() and pmd_free_pte_page(), which clear a given pud/pmd entry and free up a page for the lower level entries. This patch implements their stub functions on x86 and arm64, which work as workaround. [akpm@linux-foundation.org: fix typo in pmd_free_pte_page() stub] Link: http://lkml.kernel.org/r/20180314180155.19492-2-toshi.kani@hpe.com Fixes: e61ce6ade404e ("mm: change ioremap to set up huge I/O mappings") Reported-by: Lei Li Signed-off-by: Toshi Kani Cc: Catalin Marinas Cc: Wang Xuefeng Cc: Will Deacon Cc: Hanjun Guo Cc: Michal Hocko Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: Borislav Petkov Cc: Matthew Wilcox Cc: Chintan Pandya Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

init: Invoke init_espfix_bsp() from mm_init()

2017-12-29T16:53:45Z

commit 613e396bc0d4c7604fba23256644e78454c68cf6 upstream. init_espfix_bsp() needs to be invoked before the page table isolation initialization. Move it into mm_init() which is the place where pti_init() will be added. While at it get rid of the #ifdeffery and provide proper stub functions. Signed-off-by: Thomas Gleixner Cc: Andy Lutomirski Cc: Borislav Petkov Cc: Dave Hansen Cc: H. Peter Anvin Cc: Josh Poimboeuf Cc: Juergen Gross Cc: Linus Torvalds Cc: Peter Zijlstra Signed-off-by: Ingo Molnar Signed-off-by: Greg Kroah-Hartman

mm: fix device-dax pud write-faults triggered by get_user_pages()

2017-12-05T10:26:28Z

commit 1501899a898dfb5477c55534bdfd734c046da06d upstream. Currently only get_user_pages_fast() can safely handle the writable gup case due to its use of pud_access_permitted() to check whether the pud entry is writable. In the gup slow path pud_write() is used instead of pud_access_permitted() and to date it has been unimplemented, just calls BUG_ON(). kernel BUG at ./include/linux/hugetlb.h:244! [..] RIP: 0010:follow_devmap_pud+0x482/0x490 [..] Call Trace: follow_page_mask+0x28c/0x6e0 __get_user_pages+0xe4/0x6c0 get_user_pages_unlocked+0x130/0x1b0 get_user_pages_fast+0x89/0xb0 iov_iter_get_pages_alloc+0x114/0x4a0 nfs_direct_read_schedule_iovec+0xd2/0x350 ? nfs_start_io_direct+0x63/0x70 nfs_file_direct_read+0x1e0/0x250 nfs_file_read+0x90/0xc0 For now this just implements a simple check for the _PAGE_RW bit similar to pmd_write. However, this implies that the gup-slow-path check is missing the extra checks that the gup-fast-path performs with pud_access_permitted. Later patches will align all checks to use the 'access_permitted' helper if the architecture provides it. Note that the generic 'access_permitted' helper fallback is the simple _PAGE_RW check on architectures that do not define the 'access_permitted' helper(s). [dan.j.williams@intel.com: fix powerpc compile error] Link: http://lkml.kernel.org/r/151129126165.37405.16031785266675461397.stgit@dwillia2-desk3.amr.corp.intel.com Link: http://lkml.kernel.org/r/151043109938.2842.14834662818213616199.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: a00cc7d9dd93 ("mm, x86: add support for PUD-sized transparent hugepages") Signed-off-by: Dan Williams Reported-by: Stephen Rothwell Acked-by: Thomas Gleixner [x86] Cc: Kirill A. Shutemov Cc: Catalin Marinas Cc: "David S. Miller" Cc: Dave Hansen Cc: Will Deacon Cc: "H. Peter Anvin" Cc: Ingo Molnar Cc: Arnd Bergmann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55Z

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

mm: soft-dirty: keep soft-dirty bits over thp migration

2017-09-09T01:26:45Z

Soft dirty bit is designed to keep tracked over page migration. This patch makes it work in the same manner for thp migration too. Signed-off-by: Naoya Horiguchi Signed-off-by: Zi Yan Cc: "H. Peter Anvin" Cc: Anshuman Khandual Cc: Dave Hansen Cc: David Nellans Cc: Ingo Molnar Cc: Kirill A. Shutemov Cc: Mel Gorman Cc: Minchan Kim Cc: Thomas Gleixner Cc: Vlastimil Babka Cc: Andrea Arcangeli Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

mm: thp: check pmd migration entry in common path

2017-09-09T01:26:45Z

When THP migration is being used, memory management code needs to handle pmd migration entries properly. This patch uses !pmd_present() or is_swap_pmd() (depending on whether pmd_none() needs separate code or not) to check pmd migration entries at the places where a pmd entry is present. Since pmd-related code uses split_huge_page(), split_huge_pmd(), pmd_trans_huge(), pmd_trans_unstable(), or pmd_none_or_trans_huge_or_clear_bad(), this patch: 1. adds pmd migration entry split code in split_huge_pmd(), 2. takes care of pmd migration entries whenever pmd_trans_huge() is present, 3. makes pmd_none_or_trans_huge_or_clear_bad() pmd migration entry aware. Since split_huge_page() uses split_huge_pmd() and pmd_trans_unstable() is equivalent to pmd_none_or_trans_huge_or_clear_bad(), we do not change them. Until this commit, a pmd entry should be: 1. pointing to a pte page, 2. is_swap_pmd(), 3. pmd_trans_huge(), 4. pmd_devmap(), or 5. pmd_none(). Signed-off-by: Zi Yan Cc: Kirill A. Shutemov Cc: "H. Peter Anvin" Cc: Anshuman Khandual Cc: Dave Hansen Cc: David Nellans Cc: Ingo Molnar Cc: Mel Gorman Cc: Minchan Kim Cc: Naoya Horiguchi Cc: Thomas Gleixner Cc: Vlastimil Babka Cc: Andrea Arcangeli Cc: Michal Hocko Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds

x86/mm: Provide general kernel support for memory encryption

2017-07-18T09:38:00Z

Changes to the existing page table macros will allow the SME support to be enabled in a simple fashion with minimal changes to files that use these macros. Since the memory encryption mask will now be part of the regular pagetable macros, we introduce two new macros (_PAGE_TABLE_NOENC and _KERNPG_TABLE_NOENC) to allow for early pagetable creation/initialization without the encryption mask before SME becomes active. Two new pgprot() macros are defined to allow setting or clearing the page encryption mask. The FIXMAP_PAGE_NOCACHE define is introduced for use with MMIO. SME does not support encryption for MMIO areas so this define removes the encryption mask from the page attribute. Two new macros are introduced (__sme_pa() / __sme_pa_nodebug()) to allow creating a physical address with the encryption mask. These are used when working with the cr3 register so that the PGD can be encrypted. The current __va() macro is updated so that the virtual address is generated based off of the physical address without the encryption mask thus allowing the same virtual address to be generated regardless of whether encryption is enabled for that physical location or not. Also, an early initialization function is added for SME. If SME is active, this function: - Updates the early_pmd_flags so that early page faults create mappings with the encryption mask. - Updates the __supported_pte_mask to include the encryption mask. - Updates the protection_map entries to include the encryption mask so that user-space allocations will automatically have the encryption mask applied. Signed-off-by: Tom Lendacky Reviewed-by: Thomas Gleixner Reviewed-by: Borislav Petkov Cc: Alexander Potapenko Cc: Andrey Ryabinin Cc: Andy Lutomirski Cc: Arnd Bergmann Cc: Borislav Petkov Cc: Brijesh Singh Cc: Dave Young Cc: Dmitry Vyukov Cc: Jonathan Corbet Cc: Konrad Rzeszutek Wilk Cc: Larry Woodman Cc: Linus Torvalds Cc: Matt Fleming Cc: Michael S. Tsirkin Cc: Paolo Bonzini Cc: Peter Zijlstra Cc: Radim Krčmář Cc: Rik van Riel Cc: Toshimitsu Kani Cc: kasan-dev@googlegroups.com Cc: kvm@vger.kernel.org Cc: linux-arch@vger.kernel.org Cc: linux-doc@vger.kernel.org Cc: linux-efi@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/b36e952c4c39767ae7f0a41cf5345adf27438480.1500319216.git.thomas.lendacky@amd.com Signed-off-by: Ingo Molnar

mm/gup: Move permission checks into helpers

2017-03-18T08:48:01Z

This is a preparation patch for the transition of x86 to the generic GUP_fast() implementation. On x86, we would need to do additional permission checks to determine if access is allowed. Let's abstract it out into separate helpers. Signed-off-by: Kirill A. Shutemov Cc: Andrew Morton Cc: Aneesh Kumar K . V Cc: Borislav Petkov Cc: Catalin Marinas Cc: Dann Frazier Cc: Dave Hansen Cc: H. Peter Anvin Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Rik van Riel Cc: Steve Capper Cc: Thomas Gleixner Cc: linux-arch@vger.kernel.org Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20170316152655.37789-3-kirill.shutemov@linux.intel.com Signed-off-by: Ingo Molnar

mm: convert generic code to 5-level paging

2017-03-09T19:48:47Z

Convert all non-architecture-specific code to 5-level paging. It's mostly mechanical adding handling one more page table level in places where we deal with pud_t. Signed-off-by: Kirill A. Shutemov Acked-by: Michal Hocko Signed-off-by: Linus Torvalds