user/sven/linux.git/include/crypto/internal, branch v5.15.111

crypto: blake2s - remove shash module

2022-08-17T12:24:19Z

[ Upstream commit 2d16803c562ecc644803d42ba98a8e0aef9c014e ] BLAKE2s has no currently known use as an shash. Just remove all of this unnecessary plumbing. Removing this shash was something we talked about back when we were making BLAKE2s a built-in, but I simply never got around to doing it. So this completes that project. Importantly, this fixs a bug in which the lib code depends on crypto_simd_disabled_for_test, causing linker errors. Also add more alignment tests to the selftests and compare SIMD and non-SIMD compression functions, to make up for what we lose from testmgr.c. Reported-by: gaochao Cc: Eric Biggers Cc: Ard Biesheuvel Cc: stable@vger.kernel.org Fixes: 6048fdcc5f26 ("lib/crypto: blake2s: include as built-in") Signed-off-by: Jason A. Donenfeld Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin

lib/crypto: blake2s: avoid indirect calls to compression function for Clang CFI

2022-05-30T07:28:59Z

commit d2a02e3c8bb6b347818518edff5a4b40ff52d6d8 upstream. blake2s_compress_generic is weakly aliased by blake2s_compress. The current harness for function selection uses a function pointer, which is ordinarily inlined and resolved at compile time. But when Clang's CFI is enabled, CFI still triggers when making an indirect call via a weak symbol. This seems like a bug in Clang's CFI, as though it's bucketing weak symbols and strong symbols differently. It also only seems to trigger when "full LTO" mode is used, rather than "thin LTO". [ 0.000000][ T0] Kernel panic - not syncing: CFI failure (target: blake2s_compress_generic+0x0/0x1444) [ 0.000000][ T0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-mainline-06981-g076c855b846e #1 [ 0.000000][ T0] Hardware name: MT6873 (DT) [ 0.000000][ T0] Call trace: [ 0.000000][ T0] dump_backtrace+0xfc/0x1dc [ 0.000000][ T0] dump_stack_lvl+0xa8/0x11c [ 0.000000][ T0] panic+0x194/0x464 [ 0.000000][ T0] __cfi_check_fail+0x54/0x58 [ 0.000000][ T0] __cfi_slowpath_diag+0x354/0x4b0 [ 0.000000][ T0] blake2s_update+0x14c/0x178 [ 0.000000][ T0] _extract_entropy+0xf4/0x29c [ 0.000000][ T0] crng_initialize_primary+0x24/0x94 [ 0.000000][ T0] rand_initialize+0x2c/0x6c [ 0.000000][ T0] start_kernel+0x2f8/0x65c [ 0.000000][ T0] __primary_switched+0xc4/0x7be4 [ 0.000000][ T0] Rebooting in 5 seconds.. Nonetheless, the function pointer method isn't so terrific anyway, so this patch replaces it with a simple boolean, which also gets inlined away. This successfully works around the Clang bug. In general, I'm not too keen on all of the indirection involved here; it clearly does more harm than good. Hopefully the whole thing can get cleaned up down the road when lib/crypto is overhauled more comprehensively. But for now, we go with a simple bandaid. Fixes: 6048fdcc5f26 ("lib/crypto: blake2s: include as built-in") Link: https://github.com/ClangBuiltLinux/linux/issues/1567 Reported-by: Miles Chen Tested-by: Miles Chen Tested-by: Nathan Chancellor Tested-by: John Stultz Acked-by: Nick Desaulniers Reviewed-by: Eric Biggers Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

lib/crypto: blake2s: include as built-in

2022-05-30T07:28:59Z

commit 6048fdcc5f269c7f31d774c295ce59081b36e6f9 upstream. In preparation for using blake2s in the RNG, we change the way that it is wired-in to the build system. Instead of using ifdefs to select the right symbol, we use weak symbols. And because ARM doesn't need the generic implementation, we make the generic one default only if an arch library doesn't need it already, and then have arch libraries that do need it opt-in. So that the arch libraries can remain tristate rather than bool, we then split the shash part from the glue code. Acked-by: Herbert Xu Acked-by: Ard Biesheuvel Acked-by: Greg Kroah-Hartman Cc: Masahiro Yamada Cc: linux-kbuild@vger.kernel.org Cc: linux-crypto@vger.kernel.org Signed-off-by: Jason A. Donenfeld Signed-off-by: Greg Kroah-Hartman

crypto: shash - avoid comparing pointers to exported functions under CFI

2021-06-17T07:07:31Z

crypto_shash_alg_has_setkey() is implemented by testing whether the .setkey() member of a struct shash_alg points to the default version, called shash_no_setkey(). As crypto_shash_alg_has_setkey() is a static inline, this requires shash_no_setkey() to be exported to modules. Unfortunately, when building with CFI, function pointers are routed via CFI stubs which are private to each module (or to the kernel proper) and so this function pointer comparison may fail spuriously. Let's fix this by turning crypto_shash_alg_has_setkey() into an out of line function. Cc: Sami Tolvanen Cc: Eric Biggers Signed-off-by: Ard Biesheuvel Reviewed-by: Eric Biggers Reviewed-by: Sami Tolvanen Signed-off-by: Herbert Xu

crypto: poly1305 - fix poly1305_core_setkey() declaration

2021-04-02T07:28:12Z

gcc-11 points out a mismatch between the declaration and the definition of poly1305_core_setkey(): lib/crypto/poly1305-donna32.c:13:67: error: argument 2 of type ‘const u8[16]’ {aka ‘const unsigned char[16]’} with mismatched bound [-Werror=array-parameter=] 13 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 raw_key[16]) | ~~~~~~~~~^~~~~~~~~~~ In file included from lib/crypto/poly1305-donna32.c:11: include/crypto/internal/poly1305.h:21:68: note: previously declared as ‘const u8 *’ {aka ‘const unsigned char *’} 21 | void poly1305_core_setkey(struct poly1305_core_key *key, const u8 *raw_key); This is harmless in principle, as the calling conventions are the same, but the more specific prototype allows better type checking in the caller. Change the declaration to match the actual function definition. The poly1305_simd_init() is a bit suspicious here, as it previously had a 32-byte argument type, but looks like it needs to take the 16-byte POLY1305_BLOCK_SIZE array instead. Fixes: 1c08a104360f ("crypto: poly1305 - add new 32 and 64-bit generic versions") Signed-off-by: Arnd Bergmann Reviewed-by: Ard Biesheuvel Reviewed-by: Eric Biggers Signed-off-by: Herbert Xu

crypto: x86 - remove glue helper module

2021-01-14T06:10:29Z

All dependencies on the x86 glue helper module have been replaced by local instantiations of the new ECB/CBC preprocessor helper macros, so the glue helper module can be retired. Acked-by: Eric Biggers Signed-off-by: Ard Biesheuvel Signed-off-by: Herbert Xu

crypto: blake2b - sync with blake2s implementation

2021-01-02T21:41:39Z

Sync the BLAKE2b code with the BLAKE2s code as much as possible: - Move a lot of code into new headers and , and adjust it to be like the corresponding BLAKE2s code, i.e. like and . - Rename constants, e.g. BLAKE2B_*_DIGEST_SIZE => BLAKE2B_*_HASH_SIZE. - Use a macro BLAKE2B_ALG() to define the shash_alg structs. - Export blake2b_compress_generic() for use as a fallback. This makes it much easier to add optimized implementations of BLAKE2b, as optimized implementations can use the helper functions crypto_blake2b_{setkey,init,update,final}() and blake2b_compress_generic(). The ARM implementation will use these. But this change is also helpful because it eliminates unnecessary differences between the BLAKE2b and BLAKE2s code, so that the same improvements can easily be made to both. (The two algorithms are basically identical, except for the word size and constants.) It also makes it straightforward to add a library API for BLAKE2b in the future if/when it's needed. This change does make the BLAKE2b code slightly more complicated than it needs to be, as it doesn't actually provide a library API yet. For example, __blake2b_update() doesn't really need to exist yet; it could just be inlined into crypto_blake2b_update(). But I believe this is outweighed by the benefits of keeping the code in sync. Signed-off-by: Eric Biggers Acked-by: Ard Biesheuvel Signed-off-by: Herbert Xu

crypto: blake2s - adjust include guard naming

2021-01-02T21:41:38Z

Use the full path in the include guards for the BLAKE2s headers to avoid ambiguity and to match the convention for most files in include/crypto/. Signed-off-by: Eric Biggers Acked-by: Ard Biesheuvel Signed-off-by: Herbert Xu

crypto: blake2s - optimize blake2s initialization

2021-01-02T21:41:38Z

If no key was provided, then don't waste time initializing the block buffer, as its initial contents won't be used. Also, make crypto_blake2s_init() and blake2s() call a single internal function __blake2s_init() which treats the key as optional, rather than conditionally calling blake2s_init() or blake2s_init_key(). This reduces the compiled code size, as previously both blake2s_init() and blake2s_init_key() were being inlined into these two callers, except when the key size passed to blake2s() was a compile-time constant. These optimizations aren't that significant for BLAKE2s. However, the equivalent optimizations will be more significant for BLAKE2b, as everything is twice as big in BLAKE2b. And it's good to keep things consistent rather than making optimizations for BLAKE2b but not BLAKE2s. Signed-off-by: Eric Biggers Acked-by: Ard Biesheuvel Signed-off-by: Herbert Xu

crypto: blake2s - share the "shash" API boilerplate code

2021-01-02T21:41:38Z

Add helper functions for shash implementations of BLAKE2s to include/crypto/internal/blake2s.h, taking advantage of __blake2s_update() and __blake2s_final() that were added by the previous patch to share more code between the library and shash implementations. crypto_blake2s_setkey() and crypto_blake2s_init() are usable as shash_alg::setkey and shash_alg::init directly, while crypto_blake2s_update() and crypto_blake2s_final() take an extra 'blake2s_compress_t' function pointer parameter. This allows the implementation of the compression function to be overridden, which is the only part that optimized implementations really care about. The new functions are inline functions (similar to those in sha1_base.h, sha256_base.h, and sm3_base.h) because this avoids needing to add a new module blake2s_helpers.ko, they aren't *too* long, and this avoids indirect calls which are expensive these days. Note that they can't go in blake2s_generic.ko, as that would require selecting CRYPTO_BLAKE2S from CRYPTO_BLAKE2S_X86, which would cause a recursive dependency. Finally, use these new helper functions in the x86 implementation of BLAKE2s. (This part should be a separate patch, but unfortunately the x86 implementation used the exact same function names like "crypto_blake2s_update()", so it had to be updated at the same time.) Signed-off-by: Eric Biggers Acked-by: Ard Biesheuvel Signed-off-by: Herbert Xu