user/sven/linux.git/include/drm, branch v4.14.219

drm: mst: Fix query_payload ack reply struct

2019-12-31T11:36:46Z

[ Upstream commit 268de6530aa18fe5773062367fd119f0045f6e88 ] Spec says[1] Allocated_PBN is 16 bits [1]- DisplayPort 1.2 Spec, Section 2.11.9.8, Table 2-98 Fixes: ad7f8a1f9ced ("drm/helper: add Displayport multi-stream helper (v0.6)") Cc: Lyude Paul Cc: Todd Previte Cc: Dave Airlie Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: Sean Paul Cc: David Airlie Cc: Daniel Vetter Cc: dri-devel@lists.freedesktop.org Reviewed-by: Lyude Paul Signed-off-by: Sean Paul Link: https://patchwork.freedesktop.org/patch/msgid/20190829165223.129662-1-sean@poorly.run Signed-off-by: Sasha Levin

drm/i915: Prevent writing into a read-only object via a GGTT mmap

2019-11-12T18:18:49Z

commit 3e977ac6179b39faa3c0eda5fce4f00663ae298d upstream. If the user has created a read-only object, they should not be allowed to circumvent the write protection by using a GGTT mmapping. Deny it. Also most machines do not support read-only GGTT PTEs, so again we have to reject attempted writes. Fortunately, this is known a priori, so we can at least reject in the call to create the mmap (with a sanity check in the fault handler). v2: Check the vma->vm_flags during mmap() to allow readonly access. v3: Remove VM_MAYWRITE to curtail mprotect() Testcase: igt/gem_userptr_blits/readonly_mmap* Signed-off-by: Chris Wilson Cc: Jon Bloomfield Cc: Joonas Lahtinen Cc: Matthew Auld Cc: David Herrmann Reviewed-by: Matthew Auld #v1 Reviewed-by: Jon Bloomfield Reviewed-by: Joonas Lahtinen Link: https://patchwork.freedesktop.org/patch/msgid/20180712185315.3288-4-chris@chris-wilson.co.uk Signed-off-by: Rodrigo Vivi Signed-off-by: Greg Kroah-Hartman

drm/crc: Only report a single overflow when a CRC fd is opened

2019-07-31T05:28:56Z

[ Upstream commit a012024571d98e2e4bf29a9168fb7ddc44b7ab86 ] This reduces the amount of spam when you debug a CRC reading program. Signed-off-by: Maarten Lankhorst [mlankhorst: Change bool overflow to was_overflow (Ville)] Reviewed-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20180418125121.72081-1-maarten.lankhorst@linux.intel.com Signed-off-by: Sasha Levin

drm: don't block fb changes for async plane updates

2019-06-15T09:55:00Z

commit 89a4aac0ab0e6f5eea10d7bf4869dd15c3de2cd4 upstream. In the case of a normal sync update, the preparation of framebuffers (be it calling drm_atomic_helper_prepare_planes() or doing setups with drm_framebuffer_get()) are performed in the new_state and the respective cleanups are performed in the old_state. In the case of async updates, the preparation is also done in the new_state but the cleanups are done in the new_state (because updates are performed in place, i.e. in the current state). The current code blocks async udpates when the fb is changed, turning async updates into sync updates, slowing down cursor updates and introducing regressions in igt tests with errors of type: "CRITICAL: completed 97 cursor updated in a period of 30 flips, we expect to complete approximately 15360 updates, with the threshold set at 7680" Fb changes in async updates were prevented to avoid the following scenario: - Async update, oldfb = NULL, newfb = fb1, prepare fb1, cleanup fb1 - Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb2 - Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2 (wrong) Where we have a single call to prepare fb2 but double cleanup call to fb2. To solve the above problems, instead of blocking async fb changes, we place the old framebuffer in the new_state object, so when the code performs cleanups in the new_state it will cleanup the old_fb and we will have the following scenario instead: - Async update, oldfb = NULL, newfb = fb1, prepare fb1, no cleanup - Async update, oldfb = fb1, newfb = fb2, prepare fb2, cleanup fb1 - Non-async commit, oldfb = fb2, newfb = fb1, prepare fb1, cleanup fb2 Where calls to prepare/cleanup are balanced. Cc: # v4.14+ Fixes: 25dc194b34dd ("drm: Block fb changes for async plane updates") Suggested-by: Boris Brezillon Signed-off-by: Helen Koike Reviewed-by: Boris Brezillon Reviewed-by: Nicholas Kazlauskas Signed-off-by: Boris Brezillon Link: https://patchwork.freedesktop.org/patch/msgid/20190603165610.24614-6-helen.koike@collabora.com Signed-off-by: Greg Kroah-Hartman

drm: disable uncached DMA optimization for ARM and arm64

2019-03-13T21:03:23Z

[ Upstream commit e02f5c1bb2283cfcee68f2f0feddcc06150f13aa ] The DRM driver stack is designed to work with cache coherent devices only, but permits an optimization to be enabled in some cases, where for some buffers, both the CPU and the GPU use uncached mappings, removing the need for DMA snooping and allocation in the CPU caches. The use of uncached GPU mappings relies on the correct implementation of the PCIe NoSnoop TLP attribute by the platform, otherwise the GPU will use cached mappings nonetheless. On x86 platforms, this does not seem to matter, as uncached CPU mappings will snoop the caches in any case. However, on ARM and arm64, enabling this optimization on a platform where NoSnoop is ignored results in loss of coherency, which breaks correct operation of the device. Since we have no way of detecting whether NoSnoop works or not, just disable this optimization entirely for ARM and arm64. Cc: Christian Koenig Cc: Alex Deucher Cc: David Zhou Cc: Huang Rui Cc: Junwei Zhang Cc: Michel Daenzer Cc: David Airlie Cc: Daniel Vetter Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: Sean Paul Cc: Michael Ellerman Cc: Benjamin Herrenschmidt Cc: Will Deacon Cc: Christoph Hellwig Cc: Robin Murphy Cc: amd-gfx list Cc: dri-devel Reported-by: Carsten Haitzler Signed-off-by: Ard Biesheuvel Reviewed-by: Christian König Reviewed-by: Alex Deucher Link: https://patchwork.kernel.org/patch/10778815/ Signed-off-by: Christian König Signed-off-by: Sasha Levin

drm/edid: VSDB yCBCr420 Deep Color mode bit definitions

2018-11-10T15:48:35Z

commit 9068e02f58740778d8270840657f1e250a2cc60f upstream. HDMI Forum VSDB YCBCR420 deep color capability bits are 2:0. Correct definitions in the header for the mask to work correctly. Fixes: e6a9a2c3dc43 ("drm/edid: parse ycbcr 420 deep color information") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107893 Cc: # v4.14+ Signed-off-by: Clint Taylor Reviewed-by: Jani Nikula Reviewed-by: Shashank Sharma Signed-off-by: Jani Nikula Link: https://patchwork.freedesktop.org/patch/msgid/1538776335-12569-1-git-send-email-clinton.a.taylor@intel.com Signed-off-by: Greg Kroah-Hartman

drm: Add DP PSR2 sink enable bit

2018-08-03T05:50:42Z

[ Upstream commit 4f212e40468650e220c1770876c7f25b8e0c1ff5 ] To comply with eDP1.4a this bit should be set when enabling PSR2. Signed-off-by: José Roberto de Souza Reviewed-by: Rodrigo Vivi Signed-off-by: Rodrigo Vivi Link: https://patchwork.freedesktop.org/patch/msgid/20180328223046.16125-1-jose.souza@intel.com Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

drm/syncobj: Stop reusing the same struct file for all syncobj -> fd

2018-03-28T16:24:47Z

commit e7cdf5c82f1773c3386b93bbcf13b9bfff29fa31 upstream. The vk cts test: dEQP-VK.api.external.semaphore.opaque_fd.export_multiple_times_temporary triggers a lot of VFS: Close: file count is 0 Dave pointed out that clearing the syncobj->file from drm_syncobj_file_release() was sufficient to silence the test, but that opens a can of worm since we assumed that the syncobj->file was never unset. Stop trying to reuse the same struct file for every fd pointing to the drm_syncobj, and allocate one file for each fd instead. v2: Fixup return handling of drm_syncobj_fd_to_handle v2.1: [airlied: fix possible syncobj ref race] v2.2: [jekstrand: back-port to 4.14] Reported-by: Dave Airlie Signed-off-by: Chris Wilson Tested-by: Dave Airlie Reviewed-by: Daniel Vetter Signed-off-by: Dave Airlie Signed-off-by: Jason Ekstrand Tested-by: Clayton Craft Signed-off-by: Greg Kroah-Hartman

drm/nouveau: prefer XBGR2101010 for addfb ioctl

2018-03-15T09:54:30Z

commit c20bb155c2c5acb775f68be5d84fe679687c3c1e upstream. Nouveau only exposes support for XBGR2101010. Prior to the atomic conversion, drm would pass in the wrong format in the framebuffer, but it was always ignored -- both userspace (xf86-video-nouveau) and the kernel driver agreed on the layout, so the fact that the format was wrong didn't matter. With the atomic conversion, nouveau all of a sudden started caring about the exact format, and so the previously-working code in xf86-video-nouveau no longer functioned since the (internally-assigned) format from the addfb ioctl was wrong. This change adds infrastructure to allow a drm driver to specify that it prefers the XBGR format variant for the addfb ioctl, and makes nouveau's nv50 display driver set it. (Prior gens had no support for 30bpp at all.) Signed-off-by: Ilia Mirkin Cc: stable@vger.kernel.org # v4.10+ Acked-by: Ben Skeggs Signed-off-by: Daniel Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20180203191123.31507-1-imirkin@alum.mit.edu Signed-off-by: Greg Kroah-Hartman

drm: Allow determining if current task is output poll worker

2018-03-15T09:54:29Z

commit 25c058ccaf2ebbc3e250ec1e199e161f91fe27d4 upstream. Introduce a helper to determine if the current task is an output poll worker. This allows us to fix a long-standing deadlock in several DRM drivers wherein the ->runtime_suspend callback waits for the output poll worker to finish and the worker in turn calls a ->detect callback which waits for runtime suspend to finish. The ->detect callback is invoked from multiple call sites and waiting for runtime suspend to finish is the correct thing to do except if it's executing in the context of the worker. v2: Expand kerneldoc to specifically mention deadlock between output poll worker and autosuspend worker as use case. (Lyude) Cc: Dave Airlie Cc: Ben Skeggs Cc: Alex Deucher Reviewed-by: Lyude Paul Signed-off-by: Lukas Wunner Link: https://patchwork.freedesktop.org/patch/msgid/3549ce32e7f1467102e70d3e9cbf70c46bfe108e.1518593424.git.lukas@wunner.de Signed-off-by: Greg Kroah-Hartman