user/sven/linux.git/include/drm, branch v5.10.239

drm/atomic: clarify the rules around drm_atomic_state->allow_modeset

2025-06-04T12:37:06Z

[ Upstream commit c5e3306a424b52e38ad2c28c7f3399fcd03e383d ] msm is automagically upgrading normal commits to full modesets, and that's a big no-no: - for one this results in full on->off->on transitions on all these crtc, at least if you're using the usual helpers. Which seems to be the case, and is breaking uapi - further even if the ctm change itself would not result in flicker, this can hide modesets for other reasons. Which again breaks the uapi v2: I forgot the case of adding unrelated crtc state. Add that case and link to the existing kerneldoc explainers. This has come up in an irc discussion with Manasi and Ville about intel's bigjoiner mode. Also cc everyone involved in the msm irc discussion, more people joined after I sent out v1. v3: Wording polish from Pekka and Thomas Acked-by: Pekka Paalanen Acked-by: Dmitry Baryshkov Cc: Maarten Lankhorst Cc: Maxime Ripard Cc: Thomas Zimmermann Cc: David Airlie Cc: Daniel Vetter Cc: Pekka Paalanen Cc: Rob Clark Cc: Simon Ser Cc: Manasi Navare Cc: Ville Syrjälä Cc: Abhinav Kumar Cc: Dmitry Baryshkov Signed-off-by: Simona Vetter Signed-off-by: Simona Vetter Link: https://patchwork.freedesktop.org/patch/msgid/20250108172417.160831-1-simona.vetter@ffwll.ch Signed-off-by: Sasha Levin

drm/dp_mst: Fix drm RAD print

2025-04-10T12:30:56Z

[ Upstream commit 6bbce873a9c97cb12f5455c497be279ac58e707f ] [Why] The RAD of sideband message printed today is incorrect. For RAD stored within MST branch - If MST branch LCT is 1, it's RAD array is untouched and remained as 0. - If MST branch LCT is larger than 1, use nibble to store the up facing port number in cascaded sequence as illustrated below: u8 RAD[0] = (LCT_2_UFP << 4) | LCT_3_UFP RAD[1] = (LCT_4_UFP << 4) | LCT_5_UFP ... In drm_dp_mst_rad_to_str(), it wrongly to use BIT_MASK(4) to fetch the port number of one nibble. [How] Adjust the code by: - RAD array items are valuable only for LCT >= 1. - Use 0xF as the mask to replace BIT_MASK(4) V2: - Document how RAD is constructed (Imre) V3: - Adjust the comment for rad[] so kdoc formats it properly (Lyude) Fixes: 2f015ec6eab6 ("drm/dp_mst: Add sideband down request tracing + selftests") Cc: Imre Deak Cc: Ville Syrjälä Cc: Harry Wentland Cc: Lyude Paul Reviewed-by: Lyude Paul Signed-off-by: Wayne Lin Signed-off-by: Lyude Paul Link: https://patchwork.freedesktop.org/patch/msgid/20250113091100.3314533-2-Wayne.Lin@amd.com Signed-off-by: Sasha Levin

drm/probe-helper: Create a HPD IRQ event helper for a single connector

2025-03-13T11:47:26Z

[ Upstream commit 0464ed1a79b818d5e3eda1ac3c23a057ac0cc7c3 ] The drm_helper_hpd_irq_event() function is iterating over all the connectors when an hotplug event is detected. During that iteration, it will call each connector detect function and figure out if its status changed. Finally, if any connector changed, it will notify the user-space and the clients that something changed on the DRM device. This is supposed to be used for drivers that don't have a hotplug interrupt for individual connectors. However, drivers that can use an interrupt for a single connector are left in the dust and can either reimplement the logic used during the iteration for each connector or use that helper and iterate over all connectors all the time. Since both are suboptimal, let's create a helper that will only perform the status detection on a single connector. Signed-off-by: Maxime Ripard Reviewed-by: Sam Ravnborg Link: https://patchwork.freedesktop.org/patch/msgid/20210914101724.266570-2-maxime@cerno.tech Stable-dep-of: 666e19604641 ("drm/rockchip: cdn-dp: Use drm_connector_helper_hpd_irq_event()") Signed-off-by: Sasha Levin

drm/mipi-dsi: Create devm device attachment

2025-02-01T17:22:25Z

[ Upstream commit db6568498b35a4d5d5a99420df27ed25fae31406 ] MIPI-DSI devices need to call mipi_dsi_attach() when their probe is done to attach against their host. However, at removal or when an error occurs, that attachment needs to be undone through a call to mipi_dsi_detach(). Let's create a device-managed variant of the attachment function that will automatically detach the device at unbind. Reviewed-by: Andrzej Hajda Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210910101218.1632297-5-maxime@cerno.tech Stable-dep-of: 81adbd3ff21c ("drm: adv7511: Fix use-after-free in adv7533_attach_dsi()") Signed-off-by: Sasha Levin

drm/mipi-dsi: Create devm device registration

2025-02-01T17:22:25Z

[ Upstream commit a1419fb4a73e47f0eab2985dff594ed52397471b ] Devices that take their data through the MIPI-DSI bus but are controlled through a secondary bus like I2C have to register a secondary device on the MIPI-DSI bus through the mipi_dsi_device_register_full() function. At removal or when an error occurs, that device needs to be removed through a call to mipi_dsi_device_unregister(). Let's create a device-managed variant of the registration function that will automatically unregister the device at unbind. Reviewed-by: Andrzej Hajda Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20210910101218.1632297-4-maxime@cerno.tech Stable-dep-of: 81adbd3ff21c ("drm: adv7511: Fix use-after-free in adv7533_attach_dsi()") Signed-off-by: Sasha Levin

drm/printer: Allow NULL data in devcoredump printer

2024-10-17T13:08:16Z

[ Upstream commit 53369581dc0c68a5700ed51e1660f44c4b2bb524 ] We want to determine the size of the devcoredump before writing it out. To that end, we will run the devcoredump printer with NULL data to get the size, alloc data based on the generated offset, then run the devcorecump again with a valid data pointer to print. This necessitates not writing data to the data pointer on the initial pass, when it is NULL. v5: - Better commit message (Jonathan) - Add kerenl doc with examples (Jani) Cc: Maarten Lankhorst Acked-by: Maarten Lankhorst Signed-off-by: Matthew Brost Reviewed-by: Jonathan Cavitt Link: https://patchwork.freedesktop.org/patch/msgid/20240801154118.2547543-3-matthew.brost@intel.com Signed-off-by: Sasha Levin

drm/mipi-dsi: use correct return type for the DSC functions

2024-06-16T11:32:12Z

[ Upstream commit de1c705c50326acaceaf1f02bc5bf6f267c572bd ] The functions mipi_dsi_compression_mode() and mipi_dsi_picture_parameter_set() return 0-or-error rather than a buffer size. Follow example of other similar MIPI DSI functions and use int return type instead of size_t. Fixes: f4dea1aaa9a1 ("drm/dsi: add helpers for DSI compression mode and PPS packets") Reviewed-by: Marijn Suijten Reviewed-by: Jessica Zhang Signed-off-by: Dmitry Baryshkov Link: https://patchwork.freedesktop.org/patch/msgid/20240408-lg-sw43408-panel-v5-2-4e092da22991@linaro.org Signed-off-by: Sasha Levin

drm: Don't treat 0 as -1 in drm_fixp2int_ceil

2024-03-26T22:21:54Z

[ Upstream commit cf8837d7204481026335461629b84ac7f4538fa5 ] Unit testing this in VKMS shows that passing 0 into this function returns -1, which is highly counter- intuitive. Fix it by checking whether the input is >= 0 instead of > 0. Fixes: 64566b5e767f ("drm: Add drm_fixp_from_fraction and drm_fixp2int_ceil") Signed-off-by: Harry Wentland Reviewed-by: Simon Ser Reviewed-by: Melissa Wen Signed-off-by: Melissa Wen Link: https://patchwork.freedesktop.org/patch/msgid/20231108163647.106853-2-harry.wentland@amd.com Signed-off-by: Sasha Levin

drm: using mul_u32_u32() requires linux/math64.h

2024-02-23T07:42:15Z

[ Upstream commit 933a2a376fb3f22ba4774f74233571504ac56b02 ] Some pending include file cleanups produced this error: In file included from include/linux/kernel.h:27, from drivers/gpu/ipu-v3/ipu-dp.c:7: include/drm/drm_color_mgmt.h: In function 'drm_color_lut_extract': include/drm/drm_color_mgmt.h:45:46: error: implicit declaration of function 'mul_u32_u32' [-Werror=implicit-function-declaration] 45 | return DIV_ROUND_CLOSEST_ULL(mul_u32_u32(user_input, (1 << bit_precision) - 1), | ^~~~~~~~~~~ Fixes: c6fbb6bca108 ("drm: Fix color LUT rounding") Signed-off-by: Stephen Rothwell Signed-off-by: Ville Syrjälä Link: https://patchwork.freedesktop.org/patch/msgid/20231219145734.13e40e1e@canb.auug.org.au Signed-off-by: Sasha Levin

drm/mipi-dsi: Fix detach call without attach

2024-02-23T07:42:11Z

[ Upstream commit 90d50b8d85834e73536fdccd5aa913b30494fef0 ] It's been reported that DSI host driver's detach can be called without the attach ever happening: https://lore.kernel.org/all/20230412073954.20601-1-tony@atomide.com/ After reading the code, I think this is what happens: We have a DSI host defined in the device tree and a DSI peripheral under that host (i.e. an i2c device using the DSI as data bus doesn't exhibit this behavior). The host driver calls mipi_dsi_host_register(), which causes (via a few functions) mipi_dsi_device_add() to be called for the DSI peripheral. So now we have a DSI device under the host, but attach hasn't been called. Normally the probing of the devices continues, and eventually the DSI peripheral's driver will call mipi_dsi_attach(), attaching the peripheral. However, if the host driver's probe encounters an error after calling mipi_dsi_host_register(), and before the peripheral has called mipi_dsi_attach(), the host driver will do cleanups and return an error from its probe function. The cleanups include calling mipi_dsi_host_unregister(). mipi_dsi_host_unregister() will call two functions for all its DSI peripheral devices: mipi_dsi_detach() and mipi_dsi_device_unregister(). The latter makes sense, as the device exists, but the former may be wrong as attach has not necessarily been done. To fix this, track the attached state of the peripheral, and only detach from mipi_dsi_host_unregister() if the peripheral was attached. Note that I have only tested this with a board with an i2c DSI peripheral, not with a "pure" DSI peripheral. However, slightly related, the unregister machinery still seems broken. E.g. if the DSI host driver is unbound, it'll detach and unregister the DSI peripherals. After that, when the DSI peripheral driver unbound it'll call detach either directly or using the devm variant, leading to a crash. And probably the driver will crash if it happens, for some reason, to try to send a message via the DSI bus. But that's another topic. Tested-by: H. Nikolaus Schaller Acked-by: Maxime Ripard Reviewed-by: Sebastian Reichel Tested-by: Tony Lindgren Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20230921-dsi-detach-fix-v1-1-d0de2d1621d9@ideasonboard.com Signed-off-by: Sasha Levin