user/sven/linux.git/include/dt-bindings, branch v5.18.3

dt-bindings: clk: mpfs: add defines for two new clocks

2022-04-23T01:40:15Z

The RTC reference and MSSPLL were previously not documented or defined, as they were unused. Add their defines to the PolarFire SoC header. Fixes: 2145bb687e3f ("dt-bindings: clk: microchip: Add Microchip PolarFire host binding") Reviewed-by: Daire McNamara Signed-off-by: Conor Dooley Link: https://lore.kernel.org/r/20220413075835.3354193-6-conor.dooley@microchip.com Acked-by: Krzysztof Kozlowski Acked-by: Palmer Dabbelt Signed-off-by: Stephen Boyd

Merge tag 'rtc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2022-04-01T16:37:18Z

Pull RTC updates from Alexandre Belloni: "The bulk of the patches are about replacing the uie_unsupported struct rtc_device member by a feature bit. Subsystem: - remove uie_unsupported, all users have been converted to clear RTC_FEATURE_UPDATE_INTERRUPT and provide a reason - RTCs with an alarm with a resolution of a minute are now letting the core handle rounding down the alarm time - fix use-after-free on device removal New driver: - OP-TEE RTC PTA Drivers: - sun6i: Add H616 support - cmos: Fix the AltCentury for AMD platforms - spear: set range" * tag 'rtc-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (56 commits) rtc: check if __rtc_read_time was successful rtc: gamecube: Fix refcount leak in gamecube_rtc_read_offset_from_sram rtc: mc146818-lib: Fix the AltCentury for AMD platforms rtc: optee: add RTC driver for OP-TEE RTC PTA rtc: pm8xxx: Return -ENODEV if set_time disallowed rtc: pm8xxx: Attach wake irq to device clk: sunxi-ng: sun6i-rtc: include clk/sunxi-ng.h rtc: remove uie_unsupported rtc: xgene: stop using uie_unsupported rtc: hym8563: switch to RTC_FEATURE_UPDATE_INTERRUPT rtc: hym8563: let the core handle the alarm resolution rtc: hym8563: switch to devm_rtc_allocate_device rtc: efi: switch to RTC_FEATURE_UPDATE_INTERRUPT rtc: efi: switch to devm_rtc_allocate_device rtc: add new RTC_FEATURE_ALARM_WAKEUP_ONLY feature rtc: spear: fix spear_rtc_read_time rtc: spear: drop uie_unsupported rtc: spear: set range rtc: spear: switch to devm_rtc_allocate_device rtc: pcf8563: switch to RTC_FEATURE_UPDATE_INTERRUPT ...

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2022-03-30T17:11:04Z

Pull clk updates from Stephen Boyd: "There's one large change in the core clk framework here. We change how clk_set_rate_range() works so that the frequency is re-evaulated each time the rate is changed. Previously we wouldn't let clk providers see a rate that was different if it was still within the range, which could be bad for power if the clk could run slower when a range expands. Now the clk provider can decide to do something differently when the constraints change. This broke Nvidia's clk driver so we had to wait for the fix for that to bake a little more in -next. The rate range patch series also introduced a kunit suite for the clk framework that we're going to extend in the next release. It already made it easy to find corner cases in the rate range patches so I'm excited to see it cover more clk code and increase our confidence in core framework patches in the future. I also added a kunit test for the basic clk gate code and that work will continue to cover more basic clk types: muxes, dividers, etc. Beyond the core code we have the usual set of clk driver updates and additions. Qualcomm again dominates the diffstat here with lots more SoCs being supported and i.MX follows afer that with a similar number of SoCs gaining clk drivers. Beyond those large additions there's drivers being modernized to use clk_parent_data so we can move away from global string names for all the clks in an SoC. Finally there's lots of little fixes all over the clk drivers for typos, warnings, and missing clks that aren't critical and get batched up waiting for the next merge window to open. Nothing super big stands out in the driver pile. Full details are below. Core: - Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range New Drivers: - i.MXRT1050 clock driver and bindings - i.MX8DXL clock driver and bindings - i.MX93 clock driver and bindings - NCO blocks on Apple SoCs - Audio clks on StarFive JH7100 RISC-V SoC - Add support for the new Renesas RZ/V2L SoC - Qualcomm SDX65 A7 PLL - Qualcomm SM6350 GPU clks - Qualcomm SM6125, SM6350, QCS2290 display clks - Qualcomm MSM8226 multimedia clks Updates: - Kunit tests for clk-gate implementation - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments - Mark mux table as const in clk-mux - Make the all_lists array const - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add support for dynamic mode - Clock configuration on Microchip PolarFire SoCs - Free allocations on probe error in Mediatek clk driver - Modernize Mediatek clk driver by consolidating code - Add watchdog (WDT), I2C, and pin function controller (PFC) clocks on Renesas R-Car S4-8 - Improve the clocks for the Rockchip rk3568 display outputs (parenting, pll-rates) - Use of_device_get_match_data() instead of open-coding on Rockchip rk3568 - Reintroduce the expected fractional-divider behaviour that disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS - Remove SYS PLL 1/2 clock gates for i.MX8M* - Remove AUDIO MCLK ROOT from i.MX7D - Add fracn gppll clock type used by i.MX93 - Add new composite clock for i.MX93 - Add missing media mipi phy ref clock for i.MX8MP - Fix off by one in imx_lpcg_parse_clks_from_dt() - Rework for the imx pll14xx - sama7g5: One low priority fix for GCLK of PDMC - Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8 - Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3 - Add CAN-FD clocks on Renesas R-Car V3U - Qualcomm SC8280XP RPMCC - Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs - Rework Qualcomm GCC bindings and convert SDM845 camera bindig to YAML - Convert various Qualcomm drivers to use clk_parent_data - Remove test clocks from various Qualcomm drivers - Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS - Qualcomm SM8150 EMAC, PCIe, UFS GDSCs - Better pixel clk frequency support on Qualcomm RCG2 clks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits) clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate dt-bindings: clock: drop useless consumer example dt-bindings: clock: renesas: Make example 'clocks' parsable clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: rs9: Add Renesas 9-series PCIe clock generator driver clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index() clk: visconti: prevent array overflow in visconti_clk_register_gates() dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator clk: sifive: Move all stuff into SoCs header files from C files clk: sifive: Add SoCs prefix in each SoCs-dependent data riscv: dts: Change the macro name of prci in each device node dt-bindings: change the macro name of prci in header files and example clk: sifive: duplicate the macro definitions for the time being clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments ...

Merge branches 'clk-sifive' and 'clk-visconti' into clk-next

2022-03-29T17:19:52Z

* clk-sifive: clk: sifive: Move all stuff into SoCs header files from C files clk: sifive: Add SoCs prefix in each SoCs-dependent data riscv: dts: Change the macro name of prci in each device node dt-bindings: change the macro name of prci in header files and example clk: sifive: duplicate the macro definitions for the time being * clk-visconti: clk: visconti: prevent array overflow in visconti_clk_register_gates()

Merge branches 'clk-range', 'clk-uniphier', 'clk-apple' and 'clk-qcom' into clk-next

2022-03-29T17:19:36Z

- Make clk_set_rate_range() re-evaluate the limits each time - Introduce various clk_set_rate_range() tests - Add clk_drop_range() to drop a previously set range - Support for NCO blocks on Apple SoCs * clk-range: clk: Drop the rate range on clk_put() clk: test: Test clk_set_rate_range on orphan mux clk: Initialize orphan req_rate clk: bcm: rpi: Run some clocks at the minimum rate allowed clk: bcm: rpi: Set a default minimum rate clk: bcm: rpi: Add variant structure clk: Add clk_drop_range clk: Always set the rate on clk_set_range_rate clk: Use clamp instead of open-coding our own clk: Always clamp the rounded rate clk: Enforce that disjoints limits are invalid clk: Introduce Kunit Tests for the framework clk: Fix clk_hw_get_clk() when dev is NULL * clk-uniphier: clk: uniphier: Fix fixed-rate initialization * clk-apple: clk: clk-apple-nco: Allow and fix module building MAINTAINERS: Add clk-apple-nco under ARM/APPLE MACHINE clk: clk-apple-nco: Add driver for Apple NCO dt-bindings: clock: Add Apple NCO * clk-qcom: (61 commits) clk: qcom: gcc-msm8994: Fix gpll4 width dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml clk: qcom: Add display clock controller driver for SM6125 dt-bindings: clock: add QCOM SM6125 display clock bindings clk: qcom: Fix sorting of SDX_GCC_65 in Makefile and Kconfig clk: qcom: gcc: Add emac GDSC support for SM8150 clk: qcom: gcc: sm8150: Fix some identation issues clk: qcom: gcc: Add UFS_CARD and UFS_PHY GDSCs for SM8150 clk: qcom: gcc: Add PCIe0 and PCIe1 GDSC for SM8150 clk: qcom: clk-rcg2: Update the frac table for pixel clock clk: qcom: clk-rcg2: Update logic to calculate D value for RCG clk: qcom: smd: Add missing MSM8998 RPM clocks clk: qcom: smd: Add missing RPM clocks for msm8992/4 dt-bindings: clock: qcom: rpmcc: Add RPM Modem SubSystem (MSS) clocks clk: qcom: gcc-ipq806x: add CryptoEngine resets dt-bindings: reset: add ipq8064 ce5 resets clk: qcom: gcc-ipq806x: add CryptoEngine clocks dt-bindings: clock: add ipq8064 ce5 clk define clk: qcom: gcc-ipq806x: add additional freq for sdc table clk: qcom: clk-rcg: add clk_rcg_floor_ops ops ...

Merge branches 'clk-starfive', 'clk-ti', 'clk-terminate' and 'clk-cleanup' into clk-next

2022-03-29T17:19:10Z

- Audio clks on StarFive JH7100 RISC-V SoC - Terminate arrays with sentinels and make that clearer - Cleanup SPDX tags - Fix typos in comments * clk-starfive: clk: starfive: Add JH7100 audio clock driver clk: starfive: jh7100: Support more clock types clk: starfive: jh7100: Make hw clock implementation reusable dt-bindings: clock: Add starfive,jh7100-audclk bindings dt-bindings: clock: Add JH7100 audio clock definitions clk: starfive: jh7100: Handle audio_div clock properly clk: starfive: jh7100: Don't round divisor up twice * clk-ti: clk: ti: Drop legacy compatibility clocks for dra7 clk: ti: Drop legacy compatibility clocks for am4 clk: ti: Drop legacy compatibility clocks for am3 clk: ti: Update component clocks to use ti_dt_clk_name() clk: ti: Update pll and clockdomain clocks to use ti_dt_clk_name() clk: ti: Add ti_dt_clk_name() helper to use clock-output-names clk: ti: Use clock-output-names for clkctrl clk: ti: Add ti_find_clock_provider() to use clock-output-names clk: ti: Optionally parse IO address from parent clock node clk: ti: Preserve node in ti_dt_clocks_register() clk: ti: Constify clkctrl_name * clk-terminate: clk: actions: Make sentinel elements more obvious clk: clps711x: Terminate clk_div_table with sentinel element clk: hisilicon: Terminate clk_div_table with sentinel element clk: loongson1: Terminate clk_div_table with sentinel element clk: actions: Terminate clk_div_table with sentinel element * clk-cleanup: clk: zynq: Update the parameters to zynq_clk_register_periph_clk clk: zynq: trivial warning fix clk: qcom: sm6125-gcc: fix typos in comments clk: ti: clkctrl: fix typos in comments clk: COMMON_CLK_LAN966X should depend on SOC_LAN966 clk: Use of_device_get_match_data() clk: bcm2835: Remove unused variable clk: tegra: tegra124-emc: Fix missing put_device() call in emc_ensure_emc_driver clk: cleanup comments clk: socfpga: cleanup spdx tags

Merge branches 'clk-mvebu', 'clk-const', 'clk-imx' and 'clk-rockchip' into clk-next

2022-03-29T17:18:56Z

- Mark mux table as const in clk-mux - Make the all_lists array const * clk-mvebu: clk: mvebu: use time_is_before_eq_jiffies() instead of open coding it * clk-const: clk: Mark clk_core_evict_parent_cache_subtree() 'target' const clk: Mark 'all_lists' as const clk: pistachio: Declare mux table as const u32[] clk: qcom: Declare mux table as const u32[] clk: mmp: Declare mux tables as const u32[] clk: hisilicon: Remove unnecessary cast of mux table to u32 * clk: mux: Declare u32 *table parameter as const clk: nxp: Declare mux table parameter as const u32 * clk: nxp: Remove unused variable * clk-imx: (28 commits) dt-bindings: clock: drop useless consumer example clk: imx: Select MXC_CLK for i.MX93 clock driver clk: imx: remove redundant re-assignment of pll->base MAINTAINERS: clk: imx: add git tree and dt-bindings files clk: imx: pll14xx: Support dynamic rates clk: imx: pll14xx: Add pr_fmt clk: imx: pll14xx: explicitly return lowest rate clk: imx: pll14xx: name variables after usage clk: imx: pll14xx: consolidate rate calculation clk: imx: pll14xx: Use FIELD_GET/FIELD_PREP clk: imx: pll14xx: Drop wrong shifting clk: imx: pll14xx: Use register defines consistently clk: imx8mp: remove SYS PLL 1/2 clock gates clk: imx8mn: remove SYS PLL 1/2 clock gates clk: imx8mm: remove SYS PLL 1/2 clock gates clk: imx: add i.MX93 clk clk: imx: support fracn gppll clk: imx: add i.MX93 composite clk dt-bindings: clock: add i.MX93 clock definition dt-bindings: clock: Add imx93 clock support ... * clk-rockchip: clk: rockchip: re-add rational best approximation algorithm to the fractional divider clk/rockchip: Use of_device_get_match_data() clk: rockchip: Add CLK_SET_RATE_PARENT to the HDMI reference clock on rk3568 clk: rockchip: drop CLK_SET_RATE_PARENT from dclk_vop* on rk3568 clk: rockchip: Add more PLL rates for rk3568

Merge branches 'clk-xilinx', 'clk-kunit', 'clk-cs2000' and 'clk-renesas' into clk-next

2022-03-29T17:18:37Z

- Kunit tests for clk-gate implementation - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add support for dynamic mode * clk-xilinx: clk: zynqmp: replace warn_once with pr_debug for failed clock ops * clk-kunit: clk: gate: Add some kunit test suites * clk-cs2000: clk: cs2000-cp: convert driver to regmap clk: cs2000-cp: freeze config during register fiddling clk: cs2000-cp: make clock skip setting configurable clk: cs2000-cp: add support for dynamic mode clk: cs2000-cp: Make aux output function controllable dt-bindings: clock: cs2000-cp: document cirrus,dynamic-mode dt-bindings: clock: cs2000-cp: document cirrus,clock-skip flag dt-bindings: clock: cs2000-cp: document aux-output-source dt-bindings: clock: convert cs2000-cp bindings to yaml * clk-renesas: dt-bindings: clock: renesas: Make example 'clocks' parsable clk: rs9: Add Renesas 9-series PCIe clock generator driver clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index() dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator clk: renesas: r8a779f0: Add PFC clock clk: renesas: r8a779f0: Add I2C clocks clk: renesas: r8a779f0: Add WDT clock clk: renesas: r8a779f0: Fix RSW2 clock divider clk: renesas: rzg2l-cpg: Add support for RZ/V2L SoC dt-bindings: clock: renesas: Document RZ/V2L SoC dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions clk: renesas: r8a779a0: Add CANFD module clock clk: renesas: r9a07g044: Update multiplier and divider values for PLL2/3 clk: renesas: r8a7799[05]: Add MLP clocks clk: renesas: r8a779f0: Add SYS-DMAC clocks

Merge branches 'clk-microchip', 'clk-si', 'clk-mtk', 'clk-at91' and 'clk-st' into clk-next

2022-03-29T17:18:21Z

- Clock configuration on Microchip PolarFire SoCs - Free allocations on probe error in Mediatek clk driver - Modernize Mediatek clk driver by consolidating code * clk-microchip: clk: microchip: Add driver for Microchip PolarFire SoC dt-bindings: clk: microchip: Add Microchip PolarFire host binding * clk-si: clk-si5341: replace snprintf in show functions with sysfs_emit clk: si5341: fix reported clk_rate when output divider is 2 * clk-mtk: (32 commits) clk: mediatek: Warn if clk IDs are duplicated clk: mediatek: mt8195: Implement remove functions clk: mediatek: mt8195: Implement error handling in probe functions clk: mediatek: mt8195: Hook up mtk_clk_simple_remove() clk: mediatek: Unregister clks in mtk_clk_simple_probe() error path clk: mediatek: mtk: Implement error handling in register APIs clk: mediatek: pll: Implement error handling in register API clk: mediatek: mux: Implement error handling in register API clk: mediatek: mux: Reverse check for existing clk to reduce nesting level clk: mediatek: gate: Implement error handling in register API clk: mediatek: cpumux: Implement error handling in register API clk: mediatek: mtk: Clean up included headers clk: mediatek: Add mtk_clk_simple_remove() clk: mediatek: Implement mtk_clk_unregister_composites() API clk: mediatek: Implement mtk_clk_unregister_divider_clks() API clk: mediatek: Implement mtk_clk_unregister_factors() API clk: mediatek: Implement mtk_clk_unregister_fixed_clks() API clk: mediatek: pll: Clean up included headers clk: mediatek: pll: Implement unregister API clk: mediatek: pll: Split definitions into separate header file ... * clk-at91: clk: at91: clk-master: remove dead code clk: at91: sama7g5: fix parents of PDMCs' GCLK clk: at91: sama7g5: Allow MCK1 to be exported and referenced in DT clk: at91: allow setting PMC_AUDIOPINCK clock parents via DT * clk-st: clk: stm32mp1: Add parent_data to ETHRX clock clk: stm32mp1: Split ETHCK_K into separate MUX and GATE clock

Merge tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2022-03-28T19:50:50Z

Pull staging driver updates from Greg KH: "Here is the big set of staging driver updates for 5.18-rc1. Loads of tiny cleanups for almost all staging drivers in here, nothing major at all. Highlights include: - remove the ashmem Android driver. It is long-dead and if there are any legacy userspace applications still using it, the Android kernel images will maintain it, the community shouldn't care about it anymore - wfx wifi driver major cleanups. Should be ready to merge out of staging soon, and will coordinate with the wifi maintainers after -rc1 is out - major cleanups and unwinding of the layers of the r8188eu driver. It's amazing just how many unneeded layers of abstraction is in there, just when we think it's done, another is found... - lots of tiny coding style cleanups in many other staging drivers. All have been in linux-next for a while with no reported problems" * tag 'staging-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (455 commits) staging: r8188eu: remove unnecessary memset in r8188eu staging: greybus: introduce pwm_ops::apply staging: rts5208: Resolve checkpatch.pl issues. staging: sm750fb: fix naming style staging: fbtft: Consider type of init sequence values in fbtft_init_display() staging: fbtft: Constify buf parameter in fbtft_dbg_hex() staging: mmal-vchiq: clear redundant item named bulk_scratch mips: dts: ralink: add MT7621 SoC staging: r8188eu: remove some unused local ieee80211 macros staging: r8188eu: make rtl8188e_process_phy_info static staging: r8188eu: remove unused function prototype staging: r8188eu: remove three unused receive defines staging: r8188eu: remove unnecessary initializations staging: rtl8192e: Fix spelling mistake "RESQUEST" -> "REQUEST" MAINTAINERS: remove the obsolete file entry for staging in ANDROID DRIVERS staging: r8188eu: proper error handling in rtw_init_drv_sw staging: r8188eu: call _cancel_timer_ex from _rtw_free_recv_priv staging: vt6656: Removed unused variable vt3342_vnt_threshold staging: vt6656: Removed unused variable bb_vga_0 staging: remove ashmem ...