Linux Kernel https://git.stealer.net/cgit.cgi/user/sven/linux.git/atom?h=v6.17.11 2025-08-02T19:07:09Z 2025-08-02T19:07:09Z Linus Torvalds torvalds@linux-foundation.org 2025-08-02T19:07:09Z urn:sha1:186f3edfdd41f2ae87fc40a9ccba52a3bf930994 Pull pin control updates from Linus Walleij: "Nothing stands out, apart from maybe the interesting Eswin EIC7700, a RISC-V SoC I've never seen before. Core changes: - Open code PINCTRL_FUNCTION_DESC() instead of defining a complex macro only used in one place - Add pinmux_generic_add_pinfunction() helper and use this in a few drivers New drivers: - Amlogic S7, S7D and S6 pin control support - Eswin EIC7700 pin control support - Qualcomm PMIV0104, PM7550 and Milos pin control support Because of unhelpful numbering schemes, the Qualcomm driver now needs to start to rely on SoC codenames - STM32 HDP pin control support - Mediatek MT8189 pin control support Improvements: - Switch remaining pin control drivers over to the new GPIO set callback that provides a return value - Support RSVD (reserved) pins in the STM32 driver - Move many fixed assignments over to pinctrl_desc definitions - Handle multiple TLMM regions in the Qualcomm driver" * tag 'pinctrl-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits) pinctrl: mediatek: Add pinctrl driver for mt8189 dt-bindings: pinctrl: mediatek: Add support for mt8189 pinctrl: aspeed-g6: Add PCIe RC PERST pin group pinctrl: ingenic: use pinmux_generic_add_pinfunction() pinctrl: keembay: use pinmux_generic_add_pinfunction() pinctrl: mediatek: moore: use pinmux_generic_add_pinfunction() pinctrl: airoha: use pinmux_generic_add_pinfunction() pinctrl: equilibrium: use pinmux_generic_add_pinfunction() pinctrl: provide pinmux_generic_add_pinfunction() pinctrl: pinmux: open-code PINCTRL_FUNCTION_DESC() pinctrl: ma35: use new GPIO line value setter callbacks MAINTAINERS: add Clément Le Goffic as STM32 HDP maintainer pinctrl: stm32: Introduce HDP driver dt-bindings: pinctrl: stm32: Introduce HDP pinctrl: qcom: Add Milos pinctrl driver dt-bindings: pinctrl: document the Milos Top Level Mode Multiplexer pinctrl: qcom: spmi: Add PM7550 dt-bindings: pinctrl: qcom,pmic-gpio: Add PM7550 support pinctrl: qcom: spmi: Add PMIV0104 dt-bindings: pinctrl: qcom,pmic-gpio: Add PMIV0104 support ... 2025-07-31T20:36:27Z Linus Torvalds torvalds@linux-foundation.org 2025-07-31T20:36:27Z urn:sha1:2d945dde7fa3f17f46349360a9f97614de9f47da Pull clk updates from Stephen Boyd: "This is the usual collection of primarily clk driver updates. The big part of the diff is all the new Qualcomm clk drivers added for a few SoCs they're working on. The other two vendors with significant work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks to existing drivers and supports some new SoCs while Amlogic is starting a significant refactoring to simplify their code. The core framework gained a pair of helpers to get the 'struct device' or 'struct device_node' associated with a 'struct clk_hw'. Some associated KUnit tests were added for these simple helpers as well. Beyond that core change there are lots of little fixes throughout the clk drivers for the stuff we see every day, wrong clk driver data that affects tree topology or supported frequencies, etc. They're not found until the clks are actually used by some consumer device driver. New Drivers: - Global, display, gpu, video, camera, tcsr, and rpmh clock controller for the Qualcomm Milos SoC - Camera, display, GPU, and video clock controllers for Qualcomm QCS615 - Video clock controller driver for Qualcomm SM6350 - Camera clock controller driver for Qualcomm SC8180X - I3C clocks and resets on Renesas RZ/G3E - Expanded Serial Peripheral Interface (xSPI) clocks and resets on Renesas RZ/V2H(P) and RZ/V2N - SPI (RSPI) clocks and resets on Renesas RZ/V2H(P) - SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H - Ethernet clocks and resets on Renesas RZ/G3E - Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs - Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N - Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas RZ/V2N Updates: - Support atomic PWMs in the PWM clk driver - clk_hw_get_dev() and clk_hw_get_of_node() helpers - Replace round_rate() with determine_rate() in various clk drivers - Convert clk DT bindings to DT schema format for DT validation - Various clk driver cleanups and refactorings from static analysis tools and possibly real humans - A lot of little fixes here and there to things like clk tree topology, missing frequencies, flagging clks as critical, etc" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits) clk: clocking-wizard: Fix the round rate handling for versal clk: Fix typos clk: spacemit: ccu_pll: fix error return value in recalc_rate callback clk: tegra: periph: Make tegra_clk_periph_ops static clk: tegra: periph: Fix error handling and resolve unsigned compare warning clk: imx: scu: convert from round_rate() to determine_rate() clk: imx: pllv4: convert from round_rate() to determine_rate() clk: imx: pllv3: convert from round_rate() to determine_rate() clk: imx: pllv2: convert from round_rate() to determine_rate() clk: imx: pll14xx: convert from round_rate() to determine_rate() clk: imx: pfd: convert from round_rate() to determine_rate() clk: imx: frac-pll: convert from round_rate() to determine_rate() clk: imx: fracn-gppll: convert from round_rate() to determine_rate() clk: imx: fixup-div: convert from round_rate() to determine_rate() clk: imx: cpu: convert from round_rate() to determine_rate() clk: imx: busy: convert from round_rate() to determine_rate() clk: imx: composite-93: remove round_rate() in favor of determine_rate() clk: imx: composite-8m: remove round_rate() in favor of determine_rate() clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls clk: imx: Remove redundant pm_runtime_mark_last_busy() calls ... 2025-07-31T16:10:06Z Stephen Boyd sboyd@kernel.org 2025-07-31T16:10:06Z urn:sha1:64c21f253a3737c15ab745e9276b2352d86aed26 Resolve conflicts with i.MX95 changes 88768d6f8c13 ("clk: imx95-blk-ctl: Rename lvds and displaymix csr blk") in clk-imx and aacc875a448d ("clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data") in clk-fixes. * clk-fixes: clk: sunxi-ng: v3s: Fix TCON clock parents clk: sunxi-ng: v3s: Fix CSI1 MCLK clock name clk: sunxi-ng: v3s: Fix CSI SCLK clock name dt-bindings: clock: mediatek: Add #reset-cells property for MT8188 clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data clk: scmi: Handle case where child clocks are initialized before their parents clk: sunxi-ng: a523: Mark MBUS clock as critical 2025-07-31T02:26:49Z Linus Torvalds torvalds@linux-foundation.org 2025-07-31T02:26:49Z urn:sha1:260f6f4fda93c8485c8037865c941b42b9cba5d2 Pull drm updates from Dave Airlie: "Highlights: - Intel xe enable Panthor Lake, started adding WildCat Lake - amdgpu has a bunch of reset improvments along with the usual IP updates - msm got VM_BIND support which is important for vulkan sparse memory - more drm_panic users - gpusvm common code to handle a bunch of core SVM work outside drivers. Detail summary: Changes outside drm subdirectory: - 'shrink_shmem_memory()' for better shmem/hibernate interaction - Rust support infrastructure: - make ETIMEDOUT available - add size constants up to SZ_2G - add DMA coherent allocation bindings - mtd driver for Intel GPU non-volatile storage - i2c designware quirk for Intel xe core: - atomic helpers: tune enable/disable sequences - add task info to wedge API - refactor EDID quirks - connector: move HDR sink to drm_display_info - fourcc: half-float and 32-bit float formats - mode_config: pass format info to simplify dma-buf: - heaps: Give CMA heap a stable name ci: - add device tree validation and kunit displayport: - change AUX DPCD access probe address - add quirk for DPCD probe - add panel replay definitions - backlight control helpers fbdev: - make CONFIG_FIRMWARE_EDID available on all arches fence: - fix UAF issues format-helper: - improve tests gpusvm: - introduce devmem only flag for allocation - add timeslicing support to GPU SVM ttm: - improve eviction sched: - tracing improvements - kunit improvements - memory leak fixes - reset handling improvements color mgmt: - add hardware gamma LUT handling helpers bridge: - add destroy hook - switch to reference counted drm_bridge allocations - tc358767: convert to devm_drm_bridge_alloc - improve CEC handling panel: - switch to reference counter drm_panel allocations - fwnode panel lookup - Huiling hl055fhv028c support - Raspberry Pi 7" 720x1280 support - edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK - simple: AUO P238HAN01 - st7701: Winstar wf40eswaa6mnn0 - visionox: rm69299-shift - Renesas R61307, Renesas R69328 support - DJN HX83112B hdmi: - add CEC handling - YUV420 output support xe: - WildCat Lake support - Enable PanthorLake by default - mark BMG as SRIOV capable - update firmware recommendations - Expose media OA units - aux-bux support for non-volatile memory - MTD intel-dg driver for non-volatile memory - Expose fan control and voltage regulator in sysfs - restructure migration for multi-device - Restore GuC submit UAF fix - make GEM shrinker drm managed - SRIOV VF Post-migration recovery of GGTT nodes - W/A additions/reworks - Prefetch support for svm ranges - Don't allocate managed BO for each policy change - HWMON fixes for BMG - Create LRC BO without VM - PCI ID updates - make SLPC debugfs files optional - rework eviction rejection of bound external BOs - consolidate PAT programming logic for pre/post Xe2 - init changes for flicker-free boot - Enable GuC Dynamic Inhibit Context switch i915: - drm_panic support for i915/xe - initial flip queue off by default for LNL/PNL - Wildcat Lake Display support - Support for DSC fractional link bpp - Support for simultaneous Panel Replay and Adaptive sync - Support for PTL+ double buffer LUT - initial PIPEDMC event handling - drm_panel_follower support - DPLL interface renames - allocate struct intel_display dynamically - flip queue preperation - abstract DRAM detection better - avoid GuC scheduling stalls - remove DG1 force probe requirement - fix MEI interrupt handler on RT kernels - use backlight control helpers for eDP - more shared display code refactoring amdgpu: - add userq slot to INFO ioctl - SR-IOV hibernation support - Suspend improvements - Backlight improvements - Use scaling for non-native eDP modes - cleaner shader updates for GC 9.x - Remove fence slab - SDMA fw checks for userq support - RAS updates - DMCUB updates - DP tunneling fixes - Display idle D3 support - Per queue reset improvements - initial smartmux support amdkfd: - enable KFD on loongarch - mtype fix for ext coherent system memory radeon: - CS validation additional GL extensions - drop console lock during suspend/resume - bump driver version msm: - VM BIND support - CI: infrastructure updates - UBWC single source of truth - decouple GPU and KMS support - DP: rework I/O accessors - DPU: SM8750 support - DSI: SM8750 support - GPU: X1-45 support and speedbin support for X1-85 - MDSS: SM8750 support nova: - register! macro improvements - DMA object abstraction - VBIOS parser + fwsec lookup - sysmem flush page support - falcon: generic falcon boot code and HAL - FWSEC-FRTS: fb setup and load/execute ivpu: - Add Wildcat Lake support - Add turbo flag ast: - improve hardware generations implementation imx: - IMX8qxq Display Controller support lima: - Rockchip RK3528 GPU support nouveau: - fence handling cleanup panfrost: - MT8370 support - bo labeling - 64-bit register access qaic: - add RAS support rockchip: - convert inno_hdmi to a bridge rz-du: - add RZ/V2H(P) support - MIPI-DSI DCS support sitronix: - ST7567 support sun4i: - add H616 support tidss: - add TI AM62L support - AM65x OLDI bridge support bochs: - drm panic support vkms: - YUV and R* format support - use faux device vmwgfx: - fence improvements hyperv: - move out of simple - add drm_panic support" * tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits) drm/tidss: oldi: convert to devm_drm_bridge_alloc() API drm/tidss: encoder: convert to devm_drm_bridge_alloc() drm/amdgpu: move reset support type checks into the caller drm/amdgpu/sdma7: re-emit unprocessed state on ring reset drm/amdgpu/sdma6: re-emit unprocessed state on ring reset drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset drm/amdgpu/sdma5: re-emit unprocessed state on ring reset drm/amdgpu/gfx12: re-emit unprocessed state on ring reset drm/amdgpu/gfx11: re-emit unprocessed state on ring reset drm/amdgpu/gfx10: re-emit unprocessed state on ring reset drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset drm/amdgpu: Add WARN_ON to the resource clear function drm/amd/pm: Use cached metrics data on SMUv13.0.6 drm/amd/pm: Use cached data for min/max clocks gpu: nova-core: fix bounds check in PmuLookupTableEntry::new drm/amdgpu: Replace HQD terminology with slots naming drm/amdgpu: Add user queue instance count in HW IP info drm/amd/amdgpu: Add helper functions for isp buffers drm/amd/amdgpu: Initialize swnode for ISP MFD device ... 2025-07-30T15:58:55Z Linus Torvalds torvalds@linux-foundation.org 2025-07-30T15:58:55Z urn:sha1:8be4d31cb8aaeea27bde4b7ddb26e28a89062ebf Pull networking updates from Jakub Kicinski: "Core & protocols: - Wrap datapath globals into net_aligned_data, to avoid false sharing - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container) - Add SO_INQ and SCM_INQ support to AF_UNIX - Add SIOCINQ support to AF_VSOCK - Add TCP_MAXSEG sockopt to MPTCP - Add IPv6 force_forwarding sysctl to enable forwarding per interface - Make TCP validation of whether packet fully fits in the receive window and the rcv_buf more strict. With increased use of HW aggregation a single "packet" can be multiple 100s of kB - Add MSG_MORE flag to optimize large TCP transmissions via sockmap, improves latency up to 33% for sockmap users - Convert TCP send queue handling from tasklet to BH workque - Improve BPF iteration over TCP sockets to see each socket exactly once - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code - Support enabling kernel threads for NAPI processing on per-NAPI instance basis rather than a whole device. Fully stop the kernel NAPI thread when threaded NAPI gets disabled. Previously thread would stick around until ifdown due to tricky synchronization - Allow multicast routing to take effect on locally-generated packets - Add output interface argument for End.X in segment routing - MCTP: add support for gateway routing, improve bind() handling - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink - Add a new neighbor flag ("extern_valid"), which cedes refresh responsibilities to userspace. This is needed for EVPN multi-homing where a neighbor entry for a multi-homed host needs to be synced across all the VTEPs among which the host is multi-homed - Support NUD_PERMANENT for proxy neighbor entries - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM - Add sequence numbers to netconsole messages. Unregister netconsole's console when all net targets are removed. Code refactoring. Add a number of selftests - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup - Support inspecting ref_tracker state via DebugFS - Don't force bonding advertisement frames tx to ~333 ms boundaries. Add broadcast_neighbor option to send ARP/ND on all bonded links - Allow providing upcall pid for the 'execute' command in openvswitch - Remove DCCP support from Netfilter's conntrack - Disallow multiple packet duplications in the queuing layer - Prevent use of deprecated iptables code on PREEMPT_RT Driver API: - Support RSS and hashing configuration over ethtool Netlink - Add dedicated ethtool callbacks for getting and setting hashing fields - Add support for power budget evaluation strategy in PSE / Power-over-Ethernet. Generate Netlink events for overcurrent etc - Support DPLL phase offset monitoring across all device inputs. Support providing clock reference and SYNC over separate DPLL inputs - Support traffic classes in devlink rate API for bandwidth management - Remove rtnl_lock dependency from UDP tunnel port configuration Device drivers: - Add a new Broadcom driver for 800G Ethernet (bnge) - Add a standalone driver for Microchip ZL3073x DPLL - Remove IBM's NETIUCV device driver - Ethernet high-speed NICs: - Broadcom (bnxt): - support zero-copy Tx of DMABUF memory - take page size into account for page pool recycling rings - Intel (100G, ice, idpf): - idpf: XDP and AF_XDP support preparations - idpf: add flow steering - add link_down_events statistic - clean up the TSPLL code - preparations for live VM migration - nVidia/Mellanox: - support zero-copy Rx/Tx interfaces (DMABUF and io_uring) - optimize context memory usage for matchers - expose serial numbers in devlink info - support PCIe congestion metrics - Meta (fbnic): - add 25G, 50G, and 100G link modes to phylink - support dumping FW logs - Marvell/Cavium: - support for CN20K generation of the Octeon chips - Amazon: - add HW clock (without timestamping, just hypervisor time access) - Ethernet virtual: - VirtIO net: - support segmentation of UDP-tunnel-encapsulated packets - Google (gve): - support packet timestamping and clock synchronization - Microsoft vNIC: - add handler for device-originated servicing events - allow dynamic MSI-X vector allocation - support Tx bandwidth clamping - Ethernet NICs consumer, and embedded: - AMD: - amd-xgbe: hardware timestamping and PTP clock support - Broadcom integrated MACs (bcmgenet, bcmasp): - use napi_complete_done() return value to support NAPI polling - add support for re-starting auto-negotiation - Broadcom switches (b53): - support BCM5325 switches - add bcm63xx EPHY power control - Synopsys (stmmac): - lots of code refactoring and cleanups - TI: - icssg-prueth: read firmware-names from device tree - icssg: PRP offload support - Microchip: - lan78xx: convert to PHYLINK for improved PHY and MAC management - ksz: add KSZ8463 switch support - Intel: - support similar queue priority scheme in multi-queue and time-sensitive networking (taprio) - support packet pre-emption in both - RealTek (r8169): - enable EEE at 5Gbps on RTL8126 - Airoha: - add PPPoE offload support - MDIO bus controller for Airoha AN7583 - Ethernet PHYs: - support for the IPQ5018 internal GE PHY - micrel KSZ9477 switch-integrated PHYs: - add MDI/MDI-X control support - add RX error counters - add cable test support - add Signal Quality Indicator (SQI) reporting - dp83tg720: improve reset handling and reduce link recovery time - support bcm54811 (and its MII-Lite interface type) - air_en8811h: support resume/suspend - support PHY counters for QCA807x and QCA808x - support WoL for QCA807x - CAN drivers: - rcar_canfd: support for Transceiver Delay Compensation - kvaser: report FW versions via devlink dev info - WiFi: - extended regulatory info support (6 GHz) - add statistics and beacon monitor for Multi-Link Operation (MLO) - support S1G aggregation, improve S1G support - add Radio Measurement action fields - support per-radio RTS threshold - some work around how FIPS affects wifi, which was wrong (RC4 is used by TKIP, not only WEP) - improvements for unsolicited probe response handling - WiFi drivers: - RealTek (rtw88): - IBSS mode for SDIO devices - RealTek (rtw89): - BT coexistence for MLO/WiFi7 - concurrent station + P2P support - support for USB devices RTL8851BU/RTL8852BU - Intel (iwlwifi): - use embedded PNVM in (to be released) FW images to fix compatibility issues - many cleanups (unused FW APIs, PCIe code, WoWLAN) - some FIPS interoperability - MediaTek (mt76): - firmware recovery improvements - more MLO work - Qualcomm/Atheros (ath12k): - fix scan on multi-radio devices - more EHT/Wi-Fi 7 features - encapsulation/decapsulation offload - Broadcom (brcm80211): - support SDIO 43751 device - Bluetooth: - hci_event: add support for handling LE BIG Sync Lost event - ISO: add socket option to report packet seqnum via CMSG - ISO: support SCM_TIMESTAMPING for ISO TS - Bluetooth drivers: - intel_pcie: support Function Level Reset - nxpuart: add support for 4M baudrate - nxpuart: implement powerup sequence, reset, FW dump, and FW loading" * tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits) dpll: zl3073x: Fix build failure selftests: bpf: fix legacy netfilter options ipv6: annotate data-races around rt->fib6_nsiblings ipv6: fix possible infinite loop in fib6_info_uses_dev() ipv6: prevent infinite loop in rt6_nlmsg_size() ipv6: add a retry logic in net6_rt_notify() vrf: Drop existing dst reference in vrf_ip6_input_dst net/sched: taprio: align entry index attr validation with mqprio net: fsl_pq_mdio: use dev_err_probe selftests: rtnetlink.sh: remove esp4_offload after test vsock: remove unnecessary null check in vsock_getname() igb: xsk: solve negative overflow of nb_pkts in zerocopy mode stmmac: xsk: fix negative overflow of budget in zerocopy mode dt-bindings: ieee802154: Convert at86rf230.txt yaml format net: dsa: microchip: Disable PTP function of KSZ8463 net: dsa: microchip: Setup fiber ports for KSZ8463 net: dsa: microchip: Write switch MAC address differently for KSZ8463 net: dsa: microchip: Use different registers for KSZ8463 net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver dt-bindings: net: dsa: microchip: Add KSZ8463 switch support ... 2025-07-29T22:19:17Z Stephen Boyd sboyd@kernel.org 2025-07-29T22:19:17Z urn:sha1:c30cc9ffc1491f049f1bffb8bac4ef3f553767d2 * clk-rockchip: clk: rockchip: rk3568: Add PLL rate for 132MHz * clk-thead: clk: thead: th1520-ap: Describe mux clocks with clk_mux clk: thead: th1520-ap: Correctly refer the parent of osc_12m clk: thead: Mark essential bus clocks as CLK_IGNORE_UNUSED * clk-microchip: clk: at91: sam9x7: update pll clk ranges * clk-imx: MAINTAINERS: Update i.MX Clock Entry clk: imx95-blk-ctl: Add clock for i.MX94 LVDS/Display CSR clk: imx95-blk-ctl: Rename lvds and displaymix csr blk clk: imx95-blk-ctl: Fix synchronous abort dt-bindings: clock: Add support for i.MX94 LVDS/DISPLAY CSR clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data * clk-qcom: (65 commits) dt-bindings: clock: qcom,sm4450-dispcc: Reference qcom,gcc.yaml dt-bindings: clock: qcom,sm4450-camcc: Reference qcom,gcc.yaml dt-bindings: clock: qcom,mmcc: Reference qcom,gcc.yaml dt-bindings: clock: qcom,sm8150-camcc: Reference qcom,gcc.yaml dt-bindings: clock: qcom: Remove double colon from description clk: qcom: Add Video Clock controller (VIDEOCC) driver for Milos dt-bindings: clock: qcom: document the Milos Video Clock Controller clk: qcom: Add Graphics Clock controller (GPUCC) driver for Milos dt-bindings: clock: qcom: document the Milos GPU Clock Controller clk: qcom: Add Display Clock controller (DISPCC) driver for Milos dt-bindings: clock: qcom: document the Milos Display Clock Controller clk: qcom: Add Camera Clock controller (CAMCC) driver for Milos dt-bindings: clock: qcom: document the Milos Camera Clock Controller clk: qcom: Add Global Clock controller (GCC) driver for Milos dt-bindings: clock: qcom: document the Milos Global Clock Controller clk: qcom: common: Add support to register rcg dfs in qcom_cc_really_probe clk: qcom: gcc-x1e80100: Add missing video resets dt-bindings: clock: qcom,x1e80100-gcc: Add missing video resets clk: qcom: videocc-sm8550: Add separate frequency tables for X1E80100 clk: qcom: videocc-sm8550: Allow building without SM8550/SM8560 GCC ... 2025-07-29T22:18:33Z Stephen Boyd sboyd@kernel.org 2025-07-29T22:18:33Z urn:sha1:e3abdd1870b7dcccf3447a78037217b95929587d * clk-renesas: (42 commits) clk: renesas: r9a08g045: Add MSTOP for coupled clocks as well clk: renesas: r9a09g047: Add clock and reset signals for the GBETH IPs clk: renesas: r9a09g057: Add XSPI clock/reset clk: renesas: r9a09g056: Add XSPI clock/reset clk: renesas: rzv2h: Add fixed-factor module clocks with status reporting clk: renesas: r9a09g057: Add support for xspi mux and divider clk: renesas: r9a09g056: Add support for xspi mux and divider clk: renesas: r9a09g077: Add RIIC module clocks clk: renesas: r9a09g077: Add PLL2 and SDHI clock support clk: renesas: rzv2h: Drop redundant base pointer from pll_clk clk: renesas: r9a09g057: Add entries for the RSPIs dt-bindings: clock: renesas,r9a09g077/87: Add SDHI_CLKHS clock ID dt-bindings: clock: renesas,r9a09g056/57-cpg: Add XSPI core clock clk: renesas: rzv2h: Add missing include file clk: renesas: rzv2h: Use devm_kmemdup_array() clk: renesas: Add CPG/MSSR support to RZ/N2H SoC clk: renesas: r9a09g077: Add PCLKL core clock dt-bindings: clock: renesas,cpg-mssr: Document RZ/N2H support dt-bindings: soc: renesas: Document RZ/N2H (R9A09G087) SoC dt-bindings: clock: renesas,r9a09g077: Add PCLKL core clock ID ... * clk-samsung: clk: samsung: exynosautov920: add block hsi2 clock support dt-bindings: clock: exynosautov920: add hsi2 clock definitions dt-bindings: clock: exynosautov920: sort clock definitions clk: samsung: exynos850: fix a comment clk: samsung: gs101: fix alternate mout_hsi0_usb20_ref parent clock clk: samsung: gs101: fix CLK_DOUT_CMU_G3D_BUSD * clk-spacemit: clk: spacemit: ccu_pll: fix error return value in recalc_rate callback reset: spacemit: add support for SpacemiT CCU resets clk: spacemit: mark K1 pll1_d8 as critical clk: spacemit: define three reset-only CCUs clk: spacemit: set up reset auxiliary devices soc: spacemit: create a header for clock/reset registers dt-bindings: soc: spacemit: define spacemit,k1-ccu resets * clk-allwinner: clk: sunxi-ng: ccu_nm: convert from round_rate() to determine_rate() clk: sunxi-ng: ccu_nkmp: convert from round_rate() to determine_rate() clk: sunxi-ng: ccu_nk: convert from round_rate() to determine_rate() clk: sunxi-ng: ccu_gate: convert from round_rate() to determine_rate() clk: sunxi-ng: v3s: Assign the de and tcon clocks to the video pll clk: sunxi-ng: v3s: Fix de clock definition clk: sunxi-ng: sun55i-a523-r-ccu: Add missing PPU0 reset dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 reset * clk-amlogic: clk: amlogic: s4: remove unused data clk: amlogic: drop clk_regmap tables clk: amlogic: get regmap with clk_regmap_init clk: amlogic: remove unnecessary headers clk: amlogic: axg-audio: use the auxiliary reset driver 2025-07-29T18:17:24Z Linus Torvalds torvalds@linux-foundation.org 2025-07-29T18:17:24Z urn:sha1:4df9c0a2465a523e399e46a8d3b5866c769b381b Pull new SoC support from Arnd Bergmann: "These five newly supported chips come with both devicetree descriptions and the changes to wire them up to the build system for easier bisection. The chips in question are: - Marvell PXA1908 was the first 64-bit mobile phone chip from Marvell in the product line that started with the Digital StrongARM SA1100 based PDAs and continued with the Intel PXA2xx that dominated early smartphones. This one only made it only into a few products before the entire product line was cut in 2015. - The QiLai SoC is made by RISC-V core designer Andes Technologies and is in the 'Voyager' reference board in MicroATX form factor. It uses four in-order AX45MP cores, which is the midrange product from Andes. - CIX P1 is one of the few Arm chips designed for small workstations, and this one uses 12 Cortex-A720/A520 cores, making it also one of the only ARMv9.2 machines that one can but at the moment. - Axiado AX3000 is an embedded chip with relative small Cortex-A53 CPU cores described as a "Trusted Control/Compute Unit" that can be used as a BMC in servers. In addition to the usual I/O, this one comes with 10GBit ethernet and and a 4TOPS NPU. - Sophgo SG2000 is an embedded chip that comes with both RISC-V and Arm cores that can run Linux. This was already supported for RISC-V but now it also works on Arm One more chip, the Black Sesame C1200 did not make it in tirm for the merge window" * tag 'soc-newsoc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits) arm64: defconfig: Enable rudimentary Sophgo SG2000 support arm64: Add SOPHGO SOC family Kconfig support arm64: dts: sophgo: Add Duo Module 01 Evaluation Board arm64: dts: sophgo: Add Duo Module 01 arm64: dts: sophgo: Add initial SG2000 SoC device tree MAINTAINERS: Add entry for Axiado arm64: defconfig: enable the Axiado family arm64: dts: axiado: Add initial support for AX3000 SoC and eval board arm64: add Axiado SoC family dt-bindings: i3c: cdns: add Axiado AX3000 I3C controller dt-bindings: serial: cdns: add Axiado AX3000 UART controller dt-bindings: gpio: cdns: add Axiado AX3000 GPIO variant dt-bindings: gpio: cdns: convert to YAML dt-bindings: arm: axiado: add AX3000 EVK compatible strings dt-bindings: vendor-prefixes: Add Axiado Corporation MAINTAINERS: Add CIX SoC maintainer entry arm64: dts: cix: Add sky1 base dts initial support dt-bindings: clock: cix: Add CIX sky1 scmi clock id arm64: defconfig: Enable CIX SoC mailbox: add CIX mailbox driver ... 2025-07-29T18:13:27Z Linus Torvalds torvalds@linux-foundation.org 2025-07-29T18:13:27Z urn:sha1:0f46f50845ce75bfaba62df0421084d23bb6a72f Pull SoC driver updates from Arnd Bergmann: "Changes are all over the place, but very little sticks out as noteworthy. There is a new misc driver for the Raspberry Pi 5's RP1 multifunction I/O chip, along with hooking it up to the pinctrl and clk frameworks. The reset controller and memory subsystems have mainly small updates, but there are two new reset drivers for the K230 and VC1800B SoCs, and new memory driver support for Tegra264. The ARM SMCCC and SCMI firmware drivers gain a few more features that should help them be supported across more environments. Similarly, the SoC specific firmware on Tegra and Qualcomm get minor enhancements and chip support. In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an overhaul for code robustness, the Tegra and Qualcomm and NXP drivers grow to support more chips, while the Hisilicon, Mediatek and Renesas drivers see mostly janitorial fixes" * tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits) bus: del unnecessary init var soc: fsl: qe: convert set_multiple() to returning an integer pinctrl: rp1: use new GPIO line value setter callbacks soc: hisilicon: kunpeng_hccs: Fix incorrect log information dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface soc: qcom: socinfo: Add support to retrieve APPSBL build details soc: qcom: pmic_glink: fix OF node leak soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs soc: qcom: socinfo: Add SoC IDs for SM7635 family dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family firmware: qcom: scm: request the waitqueue irq *after* initializing SCM firmware: qcom: scm: initialize tzmem before marking SCM as available firmware: qcom: scm: take struct device as argument in SHM bridge enable firmware: qcom: scm: remove unused arguments from SHM bridge routines soc: qcom: rpmh-rsc: Add RSC version 4 support memory: tegra: Add Tegra264 MC and EMC support firmware: tegra: bpmp: Fix build failure for tegra264-only config ... 2025-07-29T18:04:52Z Linus Torvalds torvalds@linux-foundation.org 2025-07-29T18:04:52Z urn:sha1:115e74a29b530d121891238e9551c4bcdf7b04b5 Pull SoC devicetree updates from Arnd Bergmann: "There are a few new variants of existing chips: - mt6572 is an older mobile phone chip from mediatek that was extremely popular a decade ago but never got upstreamed until now - exynos2200 is a recent high-end mobile phone chip used in a few Samsung phones like the Galaxy S22 - Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M (R8A779H0) and used in automotive applications - Tegra264 is a new chip from NVIDIA, but support is fairly minimal for now, and not much information is public about it There are five more chips in a separate branch, as those are new chip families that I merged along with the necessary infrastructure. New board support is not that exciting, with a total of 33 newly added machines here: - Evaluation platforms for the chips above, plus TI am62d2 and Sophgo sg2042 - Six 32-bit industrial boards based on stm32, imx6 and am33 chips, plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and imx95 - Two newly added ASPEED BMC based motherboards, and one that got removed - Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit msm8976 SoCs - Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1 - A set-top box based on Amlogic meson-gxm Updates for existing machines are spread over all the above families. One notable change here is support for the RP1 I/O chip used in Raspberry Pi 5" * tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits) riscv: dts: sophgo: fix mdio node name for CV180X riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings riscv: dts: sophgo: add ethernet GMAC device for sg2042 riscv: dts: sophgo: Enable ethernet device for Huashan Pi riscv: dts: sophgo: Add mdio multiplexer device for cv18xx riscv: dts: sophgo: Add ethernet device for cv18xx riscv: dts: sophgo: sg2044: add pmu configuration riscv: dts: sophgo: sg2044: add ziccrse extension riscv: dts: sophgo: add zfh for sg2042 riscv: dts: sophgo: add ziccrse for sg2042 riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree riscv: dts: sophgo: sg2044: add PCIe device support for SG2044 riscv: dts: sophgo: sg2044: add MSI device support for SG2044 riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000 riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property ...