user/sven/linux.git/include/linux/acpi.h, branch v5.9.8

arm64: permit ACPI core to map kernel memory used for table overrides

2020-09-30T21:27:51Z

Jonathan reports that the strict policy for memory mapped by the ACPI core breaks the use case of passing ACPI table overrides via initramfs. This is due to the fact that the memory type used for loading the initramfs in memory is not recognized as a memory type that is typically used by firmware to pass firmware tables. Since the purpose of the strict policy is to ensure that no AML or other ACPI code can manipulate any memory that is used by the kernel to keep its internal state or the state of user tasks, we can relax the permission check, and allow mappings of memory that is reserved and marked as NOMAP via memblock, and therefore not covered by the linear mapping to begin with. Fixes: 1583052d111f ("arm64/acpi: disallow AML memory opregions to access kernel memory") Fixes: 325f5585ec36 ("arm64/acpi: disallow writeable AML opregion mapping for EFI code regions") Reported-by: Jonathan Cameron Signed-off-by: Ard Biesheuvel Tested-by: Jonathan Cameron Cc: Sudeep Holla Cc: Lorenzo Pieralisi Link: https://lore.kernel.org/r/20200929132522.18067-1-ardb@kernel.org Signed-off-by: Catalin Marinas

Merge tag 'irq-core-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2020-08-05T01:11:58Z

Pull irq updates from Thomas Gleixner: "The usual boring updates from the interrupt subsystem: - Infrastructure to allow building irqchip drivers as modules - Consolidation of irqchip ACPI probing - Removal of the EOI-preflow interrupt handler which was required for SPARC support and became obsolete after SPARC was converted to use sparse interrupts. - Cleanups, fixes and improvements all over the place" * tag 'irq-core-2020-08-04' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (51 commits) irqchip/loongson-pch-pic: Fix the misused irq flow handler irqchip/loongson-htvec: Support 8 groups of HT vectors irqchip/loongson-liointc: Fix misuse of gc->mask_cache dt-bindings: interrupt-controller: Update Loongson HTVEC description irqchip/imx-intmux: Fix irqdata regs save in imx_intmux_runtime_suspend() irqchip/imx-intmux: Implement intmux runtime power management irqchip/gic-v4.1: Use GFP_ATOMIC flag in allocate_vpe_l1_table() irqchip: Fix IRQCHIP_PLATFORM_DRIVER_* compilation by including module.h irqchip/stm32-exti: Map direct event to irq parent irqchip/mtk-cirq: Convert to a platform driver irqchip/mtk-sysirq: Convert to a platform driver irqchip/qcom-pdc: Switch to using IRQCHIP_PLATFORM_DRIVER helper macros irqchip: Add IRQCHIP_PLATFORM_DRIVER_BEGIN/END and IRQCHIP_MATCH helper macros irqchip: irq-bcm2836.h: drop a duplicated word irqchip/gic-v4.1: Ensure accessing the correct RD when writing INVALLR irqchip/irq-bcm7038-l1: Guard uses of cpu_logical_map irqchip/gic-v3: Remove unused register definition irqchip/qcom-pdc: Allow QCOM_PDC to be loadable as a permanent module genirq: Export irq_chip_retrigger_hierarchy and irq_chip_set_vcpu_affinity_parent irqdomain: Export irq_domain_update_bus_token ...

ACPI/IORT: Add an input ID to acpi_dma_configure()

2020-07-28T14:51:31Z

Some HW devices are created as child devices of proprietary busses, that have a bus specific policy defining how the child devices wires representing the devices ID are translated into IOMMU and IRQ controllers device IDs. Current IORT code provides translations for: - PCI devices, where the device ID is well identified at bus level as the requester ID (RID) - Platform devices that are endpoint devices where the device ID is retrieved from the ACPI object IORT mappings (Named components single mappings). A platform device is represented in IORT as a named component node For devices that are child devices of proprietary busses the IORT firmware represents the bus node as a named component node in IORT and it is up to that named component node to define in/out bus specific ID translations for the bus child devices that are allocated and created in a bus specific manner. In order to make IORT ID translations available for proprietary bus child devices, the current ACPI (and IORT) code must be augmented to provide an additional ID parameter to acpi_dma_configure() representing the child devices input ID. This ID is bus specific and it is retrieved in bus specific code. By adding an ID parameter to acpi_dma_configure(), the IORT code can map the child device ID to an IOMMU stream ID through the IORT named component representing the bus in/out ID mappings. Signed-off-by: Lorenzo Pieralisi Cc: Will Deacon Cc: Hanjun Guo Cc: Sudeep Holla Cc: Robin Murphy Cc: "Rafael J. Wysocki" Link: https://lore.kernel.org/r/20200619082013.13661-6-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas

drivers/acpi: Remove function cast

2020-06-27T10:55:52Z

Remove the function cast in the ACPI_DECLARE_PROBE_ENTRY macro to ensure that the functions passed as a last parameter to this macro have the right prototype. This is an effort to enable -Wcast-function-type in the top-level Makefile to support Control Flow Integrity builds. Suggested-by: Marc Zyngier Signed-off-by: Oscar Carter Signed-off-by: Marc Zyngier Acked-by: Rafael J. Wysocki Link: https://lore.kernel.org/r/20200530143430.5203-4-oscar.carter@gmx.com

drivers/acpi: Add new macro ACPI_DECLARE_SUBTABLE_PROBE_ENTRY

2020-06-27T10:55:52Z

In an effort to enable -Wcast-function-type in the top-level Makefile to support Control Flow Integrity builds, there are the need to remove all the function callback casts. To do this, create a new macro called ACPI_DECLARE_SUBTABLE_PROBE_ENTRY to initialize the acpi_probe_entry struct using the probe_subtbl field instead of the probe_table field. This is a previous work to be able to modify the IRQCHIP_ACPI_DECLARE macro to use this new defined macro. Even though these two commented fields are part of a union, this is necessary to avoid function cast mismatches. That is, due to the IRQCHIP_ACPI_DECLARE invocations use as last parameter a function with the protoype "int (*func)(struct acpi_subtable_header *, const unsigned long)" it's necessary that this macro initialize the probe_subtbl field of the acpi_probe_entry struct and not the probe_table field. Co-developed-by: Marc Zyngier Signed-off-by: Marc Zyngier Signed-off-by: Oscar Carter Acked-by: Rafael J. Wysocki Link: https://lore.kernel.org/r/20200530143430.5203-2-oscar.carter@gmx.com

Merge tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm

2020-04-09T04:03:40Z

Pull libnvdimm and dax updates from Dan Williams: "There were multiple touches outside of drivers/nvdimm/ this round to add cross arch compatibility to the devm_memremap_pages() interface, enhance numa information for persistent memory ranges, and add a zero_page_range() dax operation. This cycle I switched from the patchwork api to Konstantin's b4 script for collecting tags (from x86, PowerPC, filesystem, and device-mapper folks), and everything looks to have gone ok there. This has all appeared in -next with no reported issues. Summary: - Add support for region alignment configuration and enforcement to fix compatibility across architectures and PowerPC page size configurations. - Introduce 'zero_page_range' as a dax operation. This facilitates filesystem-dax operation without a block-device. - Introduce phys_to_target_node() to facilitate drivers that want to know resulting numa node if a given reserved address range was onlined. - Advertise a persistence-domain for of_pmem and papr_scm. The persistence domain indicates where cpu-store cycles need to reach in the platform-memory subsystem before the platform will consider them power-fail protected. - Promote numa_map_to_online_node() to a cross-kernel generic facility. - Save x86 numa information to allow for node-id lookups for reserved memory ranges, deploy that capability for the e820-pmem driver. - Pick up some miscellaneous minor fixes, that missed v5.6-final, including a some smatch reports in the ioctl path and some unit test compilation fixups. - Fixup some flexible-array declarations" * tag 'libnvdimm-for-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (29 commits) dax: Move mandatory ->zero_page_range() check in alloc_dax() dax,iomap: Add helper dax_iomap_zero() to zero a range dax: Use new dax zero page method for zeroing a page dm,dax: Add dax zero_page_range operation s390,dcssblk,dax: Add dax zero_page_range operation to dcssblk driver dax, pmem: Add a dax operation zero_page_range pmem: Add functions for reading/writing page to/from pmem libnvdimm: Update persistence domain value for of_pmem and papr_scm device tools/test/nvdimm: Fix out of tree build libnvdimm/region: Fix build error libnvdimm/region: Replace zero-length array with flexible-array member libnvdimm/label: Replace zero-length array with flexible-array member ACPI: NFIT: Replace zero-length array with flexible-array member libnvdimm/region: Introduce an 'align' attribute libnvdimm/region: Introduce NDD_LABELING libnvdimm/namespace: Enforce memremap_compat_align() libnvdimm/pfn: Prevent raw mode fallback if pfn-infoblock valid libnvdimm: Out of bounds read in __nd_ioctl() acpi/nfit: improve bounds checking for 'func' mm/memremap_pages: Introduce memremap_compat_align() ...

Merge tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

2020-04-06T17:14:39Z

Pull more power management updates from Rafael Wysocki: "Additional power management updates. These fix a corner-case suspend-to-idle wakeup issue on systems where the ACPI SCI is shared with another wakeup source, add a kernel command line option to set pm_debug_messages via the kernel command line, add a document desctibing system-wide suspend and resume code flows, modify cpufreq Kconfig to choose schedutil as the preferred governor by default in a couple of cases and do some assorted cleanups. Specifics: - Fix corner-case suspend-to-idle wakeup issue on systems where the ACPI SCI is shared with another wakeup source (Hans de Goede). - Add document describing system-wide suspend and resume code flows to the admin guide (Rafael Wysocki). - Add kernel command line option to set pm_debug_messages (Chen Yu). - Choose schedutil as the preferred scaling governor by default on ARM big.LITTLE systems and on x86 systems using the intel_pstate driver in the passive mode (Linus Walleij, Rafael Wysocki). - Drop racy and redundant checks from the PM core's device_prepare() routine (Rafael Wysocki). - Make resume from hibernation take the hibernation_restore() return value into account (Dexuan Cui)" * tag 'pm-5.7-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: platform/x86: intel_int0002_vgpio: Use acpi_register_wakeup_handler() ACPI: PM: Add acpi_[un]register_wakeup_handler() Documentation: PM: sleep: Document system-wide suspend code flows cpufreq: Select schedutil when using big.LITTLE PM: sleep: Add pm_debug_messages kernel command line option PM: sleep: core: Drop racy and redundant checks from device_prepare() PM: hibernate: Propagate the return value of hibernation_restore() cpufreq: intel_pstate: Select schedutil as the default governor

ACPI: PM: Add acpi_[un]register_wakeup_handler()

2020-04-04T17:45:18Z

Since commit fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system") the SCI triggering without there being a wakeup cause recognized by the ACPI sleep code will no longer wakeup the system. This works as intended, but this is a problem for devices where the SCI is shared with another device which is also a wakeup source. In the past these, from the pov of the ACPI sleep code, spurious SCIs would still cause a wakeup so the wakeup from the device sharing the interrupt would actually wakeup the system. This now no longer works. This is a problem on e.g. Bay Trail-T and Cherry Trail devices where some peripherals (typically the XHCI controller) can signal a Power Management Event (PME) to the Power Management Controller (PMC) to wakeup the system, this uses the same interrupt as the SCI. These wakeups are handled through a special INT0002 ACPI device which checks for events in the GPE0a_STS for this and takes care of acking the PME so that the shared interrupt stops triggering. The change to the ACPI sleep code to ignore the spurious SCI, causes the system to no longer wakeup on these PME events. To make things worse this means that the INT0002 device driver interrupt handler will no longer run, causing the PME to not get cleared and resulting in the system hanging. Trying to wakeup the system after such a PME through e.g. the power button no longer works. Add an acpi_register_wakeup_handler() function which registers a handler to be called from acpi_s2idle_wake() and when the handler returns true, return true from acpi_s2idle_wake(). The INT0002 driver will use this mechanism to check the GPE0a_STS register from acpi_s2idle_wake() and to tell the system to wakeup if a PME is signaled in the register. Fixes: fdde0ff8590b ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system") Cc: 5.4+ # 5.4+ Signed-off-by: Hans de Goede Signed-off-by: Rafael J. Wysocki

PCI/DPC: Add Error Disconnect Recover (EDR) support

2020-03-28T18:19:04Z

Error Disconnect Recover (EDR) is a feature that allows ACPI firmware to notify OSPM that a device has been disconnected due to an error condition (ACPI v6.3, sec 5.6.6). OSPM advertises its support for EDR on PCI devices via _OSC (see [1], sec 4.5.1, table 4-4). The OSPM EDR notify handler should invalidate software state associated with disconnected devices and may attempt to recover them. OSPM communicates the status of recovery to the firmware via _OST (sec 6.3.5.2). For PCIe, firmware may use Downstream Port Containment (DPC) to support EDR. Per [1], sec 4.5.1, table 4-6, even if firmware has retained control of DPC, OSPM may read/write DPC control and status registers during the EDR notification processing window, i.e., from the time it receives an EDR notification until it clears the DPC Trigger Status. Note that per [1], sec 4.5.1 and 4.5.2.4, 1. If the OS supports EDR, it should advertise that to firmware by setting OSC_PCI_EDR_SUPPORT in _OSC Support. 2. If the OS sets OSC_PCI_EXPRESS_DPC_CONTROL in _OSC Control to request control of the DPC capability, it must also set OSC_PCI_EDR_SUPPORT in _OSC Support. Add an EDR notify handler to attempt recovery. [1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019, affecting PCI Firmware Specification, Rev. 3.2 https://members.pcisig.com/wg/PCI-SIG/document/12888 [bhelgaas: squash add/enable patches into one] Link: https://lore.kernel.org/r/90f91fe6d25c13f9d2255d2ce97ca15be307e1bb.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Kuppuswamy Sathyanarayanan Signed-off-by: Bjorn Helgaas Cc: "Rafael J. Wysocki" Cc: Len Brown

ACPI: NUMA: Up-level "map to online node" functionality

2020-02-17T18:49:06Z

The acpi_map_pxm_to_online_node() helper is used to find the closest online node to a given proximity domain. This is used to map devices in a proximity domain with no online memory or cpus to the closest online node and populate a device's 'numa_node' property. The numa_node property allows applications to be migrated "close" to a resource. In preparation for providing a generic facility to optionally map an address range to its closest online node, or the node the range would represent were it to be onlined (target_node), up-level the core of acpi_map_pxm_to_online_node() to a generic mm/numa helper. Cc: Michal Hocko Acked-by: Rafael J. Wysocki Reviewed-by: Ingo Molnar Signed-off-by: Dan Williams Link: https://lore.kernel.org/r/158188324802.894464.13128795207831894206.stgit@dwillia2-desk3.amr.corp.intel.com