user/sven/linux.git/include/linux/acpi_iort.h, branch v6.1.162

perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09

2023-09-23T09:11:00Z

[ Upstream commit 0242737dc4eb9f6e9a5ea594b3f93efa0b12f28d ] Some HiSilicon SMMU PMCG suffers the erratum 162001900 that the PMU disable control sometimes fail to disable the counters. This will lead to error or inaccurate data since before we enable the counters the counter's still counting for the event used in last perf session. This patch tries to fix this by hardening the global disable process. Before disable the PMU, writing an invalid event type (0xffff) to focibly stop the counters. Correspondingly restore each events on pmu::pmu_enable(). Signed-off-by: Yicong Yang Link: https://lore.kernel.org/r/20230814124012.58013-1-yangyicong@huawei.com Signed-off-by: Will Deacon Signed-off-by: Sasha Levin

ACPI/IORT: Add a helper to retrieve RMR info directly

2022-07-06T10:51:11Z

This will provide a way for SMMU drivers to retrieve StreamIDs associated with IORT RMR nodes and use that to set bypass settings for those IDs. Tested-by: Steven Price Tested-by: Laurentiu Tudor Tested-by: Hanjun Guo Reviewed-by: Hanjun Guo Signed-off-by: Shameer Kolothum Acked-by: Robin Murphy Link: https://lore.kernel.org/r/20220615101044.1972-6-shameerali.kolothum.thodi@huawei.com Signed-off-by: Joerg Roedel

ACPI/IORT: Provide a generic helper to retrieve reserve regions

2022-07-06T10:51:10Z

Currently IORT provides a helper to retrieve HW MSI reserve regions. Change this to a generic helper to retrieve any IORT related reserve regions. This will be useful when we add support for RMR nodes in subsequent patches. [Lorenzo: For ACPI IORT] Reviewed-by: Lorenzo Pieralisi Reviewed-by: Christoph Hellwig Tested-by: Steven Price Tested-by: Laurentiu Tudor Tested-by: Hanjun Guo Reviewed-by: Hanjun Guo Signed-off-by: Shameer Kolothum Acked-by: Robin Murphy Link: https://lore.kernel.org/r/20220615101044.1972-4-shameerali.kolothum.thodi@huawei.com Signed-off-by: Joerg Roedel

ACPI/IORT: Make iort_iommu_msi_get_resv_regions() return void

2022-07-06T10:51:10Z

At present iort_iommu_msi_get_resv_regions() returns the number of MSI reserved regions on success and there are no users for this. The reserved region list will get populated anyway for platforms that require the HW MSI region reservation. Hence, change the function to return void instead. Reviewed-by: Christoph Hellwig Tested-by: Steven Price Tested-by: Laurentiu Tudor Reviewed-by: Hanjun Guo Signed-off-by: Shameer Kolothum Acked-by: Robin Murphy Link: https://lore.kernel.org/r/20220615101044.1972-3-shameerali.kolothum.thodi@huawei.com Signed-off-by: Joerg Roedel

ACPI: Move IOMMU setup code out of IORT

2021-06-25T13:02:43Z

Extract the code that sets up the IOMMU infrastructure from IORT, since it can be reused by VIOT. Move it one level up into a new acpi_iommu_configure_id() function, which calls the IORT parsing function which in turn calls the acpi_iommu_fwspec_init() helper. Signed-off-by: Jean-Philippe Brucker Reviewed-by: Eric Auger Reviewed-by: Robin Murphy Link: https://lore.kernel.org/r/20210618152059.1194210-3-jean-philippe@linaro.org Signed-off-by: Joerg Roedel

ACPI: arm64: Move DMA setup operations out of IORT

2021-06-25T13:02:43Z

Extract generic DMA setup code out of IORT, so it can be reused by VIOT. Keep it in drivers/acpi/arm64 for now, since it could break x86 platforms that haven't run this code so far, if they have invalid tables. Reviewed-by: Eric Auger Signed-off-by: Jean-Philippe Brucker Reviewed-by: Robin Murphy Link: https://lore.kernel.org/r/20210618152059.1194210-2-jean-philippe@linaro.org Signed-off-by: Joerg Roedel

arm64: mm: Set ZONE_DMA size based on early IORT scan

2020-11-20T09:34:14Z

We recently introduced a 1 GB sized ZONE_DMA to cater for platforms incorporating masters that can address less than 32 bits of DMA, in particular the Raspberry Pi 4, which has 4 or 8 GB of DRAM, but has peripherals that can only address up to 1 GB (and its PCIe host bridge can only access the bottom 3 GB) Instructing the DMA layer about these limitations is straight-forward, even though we had to fix some issues regarding memory limits set in the IORT for named components, and regarding the handling of ACPI _DMA methods. However, the DMA layer also needs to be able to allocate memory that is guaranteed to meet those DMA constraints, for bounce buffering as well as allocating the backing for consistent mappings. This is why the 1 GB ZONE_DMA was introduced recently. Unfortunately, it turns out the having a 1 GB ZONE_DMA as well as a ZONE_DMA32 causes problems with kdump, and potentially in other places where allocations cannot cross zone boundaries. Therefore, we should avoid having two separate DMA zones when possible. So let's do an early scan of the IORT, and only create the ZONE_DMA if we encounter any devices that need it. This puts the burden on the firmware to describe such limitations in the IORT, which may be redundant (and less precise) if _DMA methods are also being provided. However, it should be noted that this situation is highly unusual for arm64 ACPI machines. Also, the DMA subsystem still gives precedence to the _DMA method if implemented, and so we will not lose the ability to perform streaming DMA outside the ZONE_DMA if the _DMA method permits it. [nsaenz: unified implementation with DT's counterpart] Signed-off-by: Ard Biesheuvel Signed-off-by: Nicolas Saenz Julienne Tested-by: Jeremy Linton Acked-by: Lorenzo Pieralisi Acked-by: Hanjun Guo Cc: Jeremy Linton Cc: Lorenzo Pieralisi Cc: Nicolas Saenz Julienne Cc: Rob Herring Cc: Christoph Hellwig Cc: Robin Murphy Cc: Hanjun Guo Cc: Sudeep Holla Cc: Anshuman Khandual Link: https://lore.kernel.org/r/20201119175400.9995-7-nsaenzjulienne@suse.de Signed-off-by: Catalin Marinas

ACPI/IORT: Add an input ID to acpi_dma_configure()

2020-07-28T14:51:31Z

Some HW devices are created as child devices of proprietary busses, that have a bus specific policy defining how the child devices wires representing the devices ID are translated into IOMMU and IRQ controllers device IDs. Current IORT code provides translations for: - PCI devices, where the device ID is well identified at bus level as the requester ID (RID) - Platform devices that are endpoint devices where the device ID is retrieved from the ACPI object IORT mappings (Named components single mappings). A platform device is represented in IORT as a named component node For devices that are child devices of proprietary busses the IORT firmware represents the bus node as a named component node in IORT and it is up to that named component node to define in/out bus specific ID translations for the bus child devices that are allocated and created in a bus specific manner. In order to make IORT ID translations available for proprietary bus child devices, the current ACPI (and IORT) code must be augmented to provide an additional ID parameter to acpi_dma_configure() representing the child devices input ID. This ID is bus specific and it is retrieved in bus specific code. By adding an ID parameter to acpi_dma_configure(), the IORT code can map the child device ID to an IOMMU stream ID through the IORT named component representing the bus in/out ID mappings. Signed-off-by: Lorenzo Pieralisi Cc: Will Deacon Cc: Hanjun Guo Cc: Sudeep Holla Cc: Robin Murphy Cc: "Rafael J. Wysocki" Link: https://lore.kernel.org/r/20200619082013.13661-6-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas

ACPI/IORT: Make iort_msi_map_rid() PCI agnostic

2020-07-28T14:51:31Z

There is nothing PCI specific in iort_msi_map_rid(). Rename the function using a bus protocol agnostic name, iort_msi_map_id(), and convert current callers to it. Signed-off-by: Lorenzo Pieralisi Acked-by: Bjorn Helgaas Cc: Will Deacon Cc: Hanjun Guo Cc: Bjorn Helgaas Cc: Sudeep Holla Cc: Robin Murphy Cc: "Rafael J. Wysocki" Link: https://lore.kernel.org/r/20200619082013.13661-4-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas

ACPI/IORT: Make iort_get_device_domain IRQ domain agnostic

2020-07-28T14:51:31Z

iort_get_device_domain() is PCI specific but it need not be, since it can be used to retrieve IRQ domain nexus of any kind by adding an irq_domain_bus_token input to it. Make it PCI agnostic by also renaming the requestor ID input to a more generic ID name. Signed-off-by: Lorenzo Pieralisi Acked-by: Bjorn Helgaas # pci/msi.c Cc: Will Deacon Cc: Hanjun Guo Cc: Bjorn Helgaas Cc: Sudeep Holla Cc: Robin Murphy Cc: "Rafael J. Wysocki" Link: https://lore.kernel.org/r/20200619082013.13661-3-lorenzo.pieralisi@arm.com Signed-off-by: Catalin Marinas