user/sven/linux.git/include/linux/amba/clcd.h, branch v5.4.108

video: amba-clcd: Decomission Versatile and Nomadik

2019-04-11T17:25:12Z

These board families are now handled in the DRM subsystem where we can have reusable panel drivers and some other stuff. The PL111 there is now the driver used in the defconfig for Versatile and Nomadik so no need to keep this code around. There are a few minor machines in arch/arm/ such as mach-netx still using the old driver, so we need to keep the core fbdev driver around for some time. Signed-off-by: Linus Walleij Cc: Russell King Signed-off-by: Bartlomiej Zolnierkiewicz

video: ARM CLCD: Move registers to a separate header.

2017-05-08T19:24:06Z

We'd like to reuse these register definitions for the DRM CLCD driver, but there's a bunch of fbdev-specific code in the current header. v2: Add #ifndef guard. Signed-off-by: Eric Anholt Link: http://patchwork.freedesktop.org/patch/msgid/20170413031746.12921-1-eric@anholt.net

video: ARM CLCD: support Nomadik variant

2016-08-11T14:54:53Z

The Nomadik variant has a few special quirks that need to be respected to make the driver work: - The block need to be clocked during writing of the TIMn registers or the bus will stall. - Special bits in the control register select how many of the output display lines get activated. - Special bits in the control register select how to manage the different 565 and 5551 modes. - There is a packed 24bit graphics mode, i.e 888 pixels can be stored in memory is three consecutive bytes, not evenly aligned to a 32bit word. This patch uses the vendor data pointer from the AMBA matching mechanism to track the quirks for this variant, and adds two hooks that variants can use to initialize boards and panels during start-up. These will later be used to adopt a Nomadik board profile. Cc: Pawel Moll Cc: Rob Herring Cc: Russell King Signed-off-by: Linus Walleij Signed-off-by: Tomi Valkeinen

video: ARM CLCD: support pads connected in reverse order

2016-08-11T14:54:53Z

There are CLCDs connected with the pads in BGR rather than RGB order. It really doesn't matter since the CLCD has a flag and a bit to switch the position of the RGB and BGR components. This is needed to put something logical into the arm,pl11x,tft-r0g0b0-pads property of the device tree on the Nomadik which will then be <16 8 0>. Cc: Pawel Moll Cc: Rob Herring Cc: Russell King Signed-off-by: Linus Walleij Signed-off-by: Tomi Valkeinen

video: ARM CLCD: backlight support for OF

2016-08-11T14:54:52Z

If the device is probed from device tree, we can support backlight. This is used with some systems such as the ST Microelectronics Nomadik. We have to add HAS_IOMEM to the dependencies of CLCD since the backlight class device will now be selected, and if it gets selected on an arch that does not have IOMEM, compilation will fail. Cc: Pawel Moll Cc: Rob Herring Cc: Russell King Signed-off-by: Linus Walleij Signed-off-by: Tomi Valkeinen

Fix common misspellings

2011-03-31T14:26:23Z

Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi

ARM: clcd: add method for describing display capabilities

2011-02-19T11:09:05Z

The ARM CLCD PL110 controller in TFT mode provides two output formats based on whether the controller is in 24bpp mode or not - either 5551 or 888. PL111 augments this with a 444 and 565 modes. Some implementations provide an external MUX on the PL110 output to reassign the bits to achieve 565 mode. Provide a system of capability flags to allow the CLCD driver to work out what is supported by each panel and board, and therefore which display formats are permitted. Acked-by: Catalin Marinas Signed-off-by: Russell King

ARM: clcd: use amba_part() to determine if we have a PL110 primecell

2011-02-19T11:08:59Z

Instead of matching the entire peripheral ID, match against just the part number using the amba_xxx() macros. Acked-by: Catalin Marinas Signed-off-by: Russell King

VIDEO: amba clcd: don't disable an already disabled clock

2010-08-17T21:15:09Z

Fix the clock enable/disable tracking in the AMBA CLCD driver so that the driver doesn't try to disable an already disabled clock, thereby causing the clock (if shared) to become unbalanced. This resolves a problem with CLCD on LPC32xx ARM platforms. Reported-by: Kevin Wells Signed-off-by: Russell King

Video: ARM CLCD: Better fix for swapped IENB and CNTL registers

2010-03-14T19:42:44Z

On PL111, as found on Realview and other platforms, these registers are always arranged as CNTL then IENB. On PL110, these registers are IENB then CNTL, except on Versatile platforms. Re-arrange the handling of these register swaps so that PL111 always gets it right without resorting to ifdefs, leaving the only case needing special handling being PL110 on Versatile. Fill out amba/clcd.h with the PL110/PL111 register definition differences in case someone tries to use the PL110 specific definitions on PL111. Signed-off-by: Russell King